Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC MES WORKS SITE CARNICOBAR ANDAMAN NICOBAR ISLAND | CARNICOBAR | NICOBAR | ANDAMAN AND NICOBAR ISLANDS | 744301 | L1 | Accepted-AOC ACCEPTED BEING THE L1 BIDDER | |
| 2 | L2₹32.6 L+₹2.3 L (7.55%)Rejected-AOC | L2 | Rejected-AOC REJECTED FOR NOT BEING THE L1 BIDDER | |
| 3 | L3₹33.2 L+₹2.8 L (9.38%)Rejected-AOC 06 GOVIND NAGAR PANCHAYAT USR TRANSPORT CAMPBELL BAY OLD FISHERMAN COLONY CAMPBELL BAY GREAT NICOBAR ISLANDS | L3 | Rejected-AOC REJECTED FOR NOT BEING THE L1 BIDDER | |
| 4 | L4₹33.9 L+₹3.5 L (11.7%)Rejected-AOC | L4 | Rejected-AOC REJECTED FOR NOT BEING THE L1 BIDDER | |
| 5 | L5₹34.4 L+₹4.1 L (13.5%)Rejected-AOC | L5 | Rejected-AOC REJECTED FOR NOT BEING THE L1 BIDDER |
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
16 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE (I) CAMPBELL BAY, ARMY LAND, CAMPBELL BAY, GREAT NICOBAR-744302
PROVN OF INSTALLATION OF ILLUMINATED LANDING DIRECTION INDICATOR FOR AIRFIELD AT INS BAAZ UNDER GE(I) CAMPBELL BAY
2023_MES_627619_1
8100/E8
Open Tender
Civil Works
Item Rate
180 days
CAMPBELL BAY
PLEASE REFER TENDER DOCUMENT AND NIT
8 documents required · 8 mandatory
₹500
GE (I) CAMPBELL BAY
₹59,000
Yes
23 Feb 2024
9 Nov 2023
18 Dec 2023
9 Nov 2023
16 Dec 2023
27 Nov 2023
Amount
B/R PORTION Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, and getting out watering, and removing surplus soil to a distance n.exc 50 m and making good surface in any type of soil complete all as specified and as directed.
M & L for PCC (1:4:8) type D-2 (using 40 mm graded aggregate) as in foundation and mass concrete for angle iron post completed all as specified and as directed.
S & F mild steel work in tubular sections including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 for sheds, valley gutters of Gde Fe 410-W (Gde E-250) Quality A complete all as specified and as directed.
S & F mild steel framed work of Gde Fe 410W (Gde E-250) Quality A as in required shape/ structure for lighting purpose complete all as specified and as directed.
M & L for preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
M & L for illuminated taxiway sign boards of size 1940mm x 610mm made with 2mm thick aluminium/ MS sheet(as directed by GE) mounted on 32mm dia GI pipes medium grade, board painted with rectro- reflective self adhesive paper on both sides including writing letters n.exc 450mm high and 400mm wide as directed by Engr-in-Charge, embedded in ground with 04 Nos of PCC block of size 300mm x 300mm x 450mm, type C-2 (using 40mm graded stone aggregate), the height of board shall be n.exc 1.5m above ground level and n.exc 1.0m below ground level complete all as specified and as directed.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in hard/ dense soil all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/ loose soil all as specified and as directed.
M & L for Precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in cement mortar (1:6) complete all as specified and as directed.
M & L for rendering 15mm thick in CM (1:4) on external surfaces finished even and smooth without using extra cement all as specified and as directed.
Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil all as specified and as directed.
M & L for hard core of broken stone of gauge n.exc 63mm deposited, spread and levelled in layers, watered and rammed to true surface in plinth protection/ hard standing all as specified and as directed.
M & L for providing 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) laid in floor/ sub base cement concrete surface, even and smooth without using extra cement all as specified and as directed.
M & L for providing 75mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) laid in base, cement concrete surface, even and smooth without using extra cement all as specified and as directed.
Removing excavated/ demolished material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and as directed.
M & L for chequered cement concrete tiles of size 200mm x 200mm x 25mm thick with grey cement and no pigment, set jointed and pointed in neat cement slurry colour to match in floors, laid over and including 20mm thick screed bed or bedding layer in CM (1:6) for laying floor finish all as specified and as directed.
E/M PORTION S & L XLPE insulated, armoured, heavy duty, electric cable of size 3.5 Core x 95 Sqmm with stranded aluminium conductors, 1100 volts grade, laid in tranches /fixing on wall/ poles or passing through pipe, including connecting up with suitable glands, lugs, nuts and bolts wherever required and testing on completion, with GI protections pipes, complete all as specified and as directed.
S & L XLPE insulated, armoured, heavy duty, electric cable of size 4 Core x 16 Sq mm with stranded aluminium conductors, 1100 volts grade, laid in tranches/fixing on wall/poles or passing through pipe, including connecting up with suitable glands, lugs, nuts and bolts wherever required and testing on completion, with GI protections pipes, complete all as specified and as directed.
S & F of HDPE double wall corrugated pipe confirming to IS -14930 part with IP protection IP-67 having inner dia 80 mm complete terminated up to termination end point complete all as specified and as directed. Make : Gemini/ Telerex/ Prince
S & F for HDPE double wall corrugated pipes conforming to IS-14930 part-II with IP Protection of IP-67 having outer dia 50 mm and inner dia of 38 mm with necessary couplers, bends etc for protection of LT cable all as specified and as directed. Make : Gemini/ Telerex/ Prince
Supply, install testing and commissioning weather and vermin proof Outdoor type L.T. Panel board (Near Galley) factory fabricated indoor cubicle/kiosk type totally enclosed IP 54 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of grey or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum complete all as specified and directed and consisting of following :-
Supply, install testing and commissioning weather and vermin proof Outdoor type L.T. Panel board (Near MT) factory fabricated indoor cubicle/kiosk type totally enclosed IP 54 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum complete all as specified and directed and consisting of following :-
Supply, install testing and commissioning weather and vermin proof Outdoor type L.T. Panel board(Near Admin Bldg) factory fabricated indoor cubicle/kiosk type totally enclosed IP 54 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum complete all as specified and directed and consisting of following :-
Note for Item No. 22.00 to 24.10 :- (a) Excavation for fixing of the panels is deemed to be included in the quoted rate. (b) PCC required for fixing of panels is deemed to be included in the quoted rate. (c) The Contractor has to submit the drawings & specifications of the panel for approval by Engr-in- Charge. (d) Panels should be at least 1.5 Feet above the ground and 1.5 Feet Below ground.
Supply, install testing and commissioning weather and vermin proof Outdoor type sheet metal enclosure factory fabricated indoor cubicle/kiosk type totally enclosed IP 54 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 25x25x3 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel door (cover) on one side with handle, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of grey or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum and copper cable lugs as required complete all as specified and directed and consisting of following :-
(a) Aluminuim bus bar 125 Amps for 3 phase & neutral (b) MCB TPN 40 Amps 10 KA. "C" Series- 1 No (01 No. as Incoming) (c) MCB SP 6 to 32 Amps 10 KA. "C" Series- 04 Nos. (3 Nos. as Outgoing and 01 No. as spare) (d) Indicator lamp (RYB) - 3 Nos (e) Blank Space for Mounting of SP MCB- 01 No. Note for Item No.26 :- (a) Excavation for fixing of the sheet metal enclosure is deemed to be included in the quoted rate. (b) PCC required for fixing of sheet metal enclosureis deemed to be included in the quoted rate. (c) The Contractor has to submit the drawings & specifications of the sheet metal enclosure for approval by Engr-in- Charge. (d) Panels should be at least 1.0 Feet above the ground and 1.0 Feet Below ground.
S & F GI pipe 80mm bore light grade with all fittings laid in trenches/on wall / on poles etc/ for protection complete all as specified and as directed.
S & F GI pipe 50mm bore light grade with all fittings laid in trenches/on wall / on poles etc/ for protection complete all as specified and as directed.
M & L for cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling for laying of cable pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed.
M & L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6mm burried earth pit not less than 2.25m depth below normal ground level with to edge of the plate vertically to depth of not less than 1.5 m below ground level connected to & including Galvanised earth strip of size 25 x 4 mm by mean of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR-2020 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc. complete all as specified and as directed. Note : (i) Refilling of the earth pit shall be carried out with black cotton soil. (ii) GI Strip 25 x 4mm & GI protection pipe upto 7.5 m length will be measured under this item. (iii) On testing after completion, if the desired earth resistance is not obtained the earthing will be redone to the entire satisfaction of Engr-in-Charge at no extra cost
M & L for wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2 x 1.5 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 1.5 Sqmm FRLS multistranded copper conductor cable as continuous earth wire complete all as specified and as directed.
KCM BUILDERS & CONSTRUCTIONS (INDIA) PVT.LTD
USR Transport
M/S Sudhir Kumar Gupta
M/S G S GREWAL
RSL Construction
MAHESWARI CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .