SPL REPAIR OF LIVING IN ACCOMMODATION IN DOMESTIC AREA AT AF STN PURNEA

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete.

M&L for glazed coloured ceramic tiles premium quality in dado/vertical surface (350mm x250mm x 7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete including taking down of wall tile all as specified and directed.

M&L for Non skid coloured tiles premium quality (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding as per direction of Engr-in-Charge.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in levelling course complete all as specified.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 laying floor finishes complete all as specified.

M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles on vetical surface mplete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.

M&L for 15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement complete with water proofing compound all as specified. (WPC shall be measured separtely)

M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified.

Supply only integral water proofing compound as per latest IS specification complete all as specified.

Demolition of brick/stone masonry built in CM complete all as specified.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

M & L for applying 1-2 mm thick layer of wall putty on walls to give uniform surface complete all as specified and directed by Engr-in-charge.

M&L two coats of oil bound distemper on walls including preparation on new surfaces over coat of primer complete all as specified and directed. .

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L two coats of oil bound distemper on ceiling including preparation on new surfaces over coat of primer complete all as specified and directed. .

M & L for applying 1-2 mm thick layer of wall putty on walls to give uniform surface complete all as specified and directed. NOTE:-(Before applying of wall care putty, complete removing of treatment as directed and approved by Engr-in-charge)

M&L two coats of oil bound distemper on walls including preparation on old surfaces over coat of primer complete all as specified and directed. .

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.

M&L for preparation of new wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of old wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

M&L for preparation of old steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides as per SSR part I

S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc all as specified.

M&L for rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410-W (Gde E-250) quality 'B" complete all as specified.

S&F of 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt all as specified.

S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&Fof 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified.

S&F Stainless Steel butt hinges with galvanised mild steel hinge pin, of size 100 mm long complete all as specified and directed.

S&F in repair MS helical door spring 300mm size incl roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified

S&F in repair floor door stopper overall length of cover plate 150 mm of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and as directed by Engineer-in-Charge.

M & L aluminium deco grill for window and other similar works including fixing in frame complete all as specified and as directed.

M & L for 4.8mm thick tinted glass square/rectangular exc 0.5 Sqm in each pane fixed to aluminium frame including rubber beads and other necessary accessories complete all as specified.

M & L for 4.8mm thick one side frosted glass square/rectangular n.exc 0.5 Sqm in each pane fixed to aluminium frame including rubber beads and other necessary accessories complete all as specified.

S&F in repair galvanised mild steel wire clothcut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F Factory made solid PVC Moulded door shutter with particle board core, 28 to 30 mm thick stile, with 2,4 or 6 raised panel desigh with 2mm thick moulded Prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F aluminum handles cast type, anodised, 150mm size complete all as specified .

S&F aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified .

Dismentaling boarding , any description, fixed in any position with nails complete all as specified and as directed.

S&F in repair 18/19 mm thick block boards, grade-2 quality, interior grade, decorative type, with decorative face veneer on both face, fixed with screws as in shelves and shutters of cup board exposed face fixed with 20x6mm thick teak wood beading complete all as specified.

S&F of 100 mm long aluminium anodised hasp and staple , as in repair, complete all as specified

S & F in repair continuous (piano) hinges width of flaps (when open) 40 mm, mild steel, bright finish or electrogalvanised complete all as specified.

S&F aluminum handles cast type, anodised, 100mm size complete all as specified .

Taking down existing bituminious tarfelt including plastred lime or cement concrete of any thickness and cleaning of the surfaces of roof treanches including flushing and junction parapets kerb wall s PCC fillets etc with wire brushes and removing of the rubbish to a distance n.exc 500 Mtrs and depositing where directed at a level n exc 1.5 Mtrs above the starting point complete all as directed

M&L PCC 1:2:4 using B0 (12.50 graded aggregate) for coping, corner of roof and similar work complete all as sepcified and directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified.

Dismantling Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

M&L for providing false ceiling GI frame work for seamless ceiling comprising of GI perimerter channel 0.55 mm thick with two unequal flages of 20 to 30 mm and web of 27 mm fixed to surrounding wall using screws at 452 mm C/C channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm C/c with GI cleat and steel expansion or sutable hanging from soffits/trusses/bracking supporting hanger compressing of GI wire complete all as sepcified and directed by Engr-in-Charge.

M&L 6mm thick 600x600mm size asbestos cement plain E-boards designer ceiling (Make; Everest of equvalent), fixed to GI grid work with screws.

S & F of hangers 6mm dia GI adjusting lever fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified. Make : Hindware/Perryware/Cera/Jaquar.

S&F in repair water closet (orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) . Make : Hindware/Perryware /Cera/Jaquar.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as spcified and directed.

Supply only cast iron 'P' trap 100mm dia complete all as specified and as directed.

S&F as in repair vitreous china urinal, half stall type white (excluding flusing cistern, flush pipe) including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe complete all as specified, Make : Hindware/Perryware/ Cera/Jaquar

S & F in repair flush pipe of PVC 32 mm dia for low level cistern. all as specified.

S&F in repair swan neck pillar taps of bore dia 15mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Make : Hindware/Perryware/Cera/Jaquar/Kolher

S & F in repair brass chromium plated fancy type wall mixer 15 mm bore for mixing hot & cold water screw down for iron pipe, fixing in repair complete all as specified. Make : Hindware/Perryware/ Cera/ Jaquar/Kolher

S & F in repair CP Stop valve/ angle valve fancy type 15mm dia cast copper alloy with long shank and cup. Make : Hindware/Perryware/Cera/ Jaquar/Kolher

S&F in repair bib tap 15mm bore fancy type chromium plated all as specified. Make : Hindware/Perryware/Cera/ Jaquar/Kolher/Prayag

S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union of bore 15 mm, as in repairs all as specified. Make : Hindware/Perryware/Cera/ Jaquar/Kolher/Prayag

S&F in repair grating doom 100mm dia of PTMT (min weight 25gms) complete as specified and directed. Make : Prayag, Pollytuff, Shakti

S&F in repair glass sheet assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge.

S&F in repair CP soap dish holder, complete all as specified and as directed by Engr-in-Charge.

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges brass chromium plated, fixed with rawl plugs. all as specified. Make : Modigaurd/Sandgibin or equilent.

S&F in rewpair PVC connection 15mm size with PTMT nuts of lengh 450mm complete all as specified.

S&F in repair looking mirror 5 mm thick, mounted on 6mm thick PVC Sheet and fixed with stainles steel stud complete all as specified. Make : Modiguard/Santgobin/Atul

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia upto 100mm. all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches all as specified.

S&F Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door. all as specified.

S&F in repair cast iron out let floor trap 100mm dia incl jointing to waste pipe fixed in cement concrete type B-1 1:2:4) complete all as specified and as directed..

S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe.complete all as specifiecd and directed.

Dismantling galvalume sheet (corrugated or semi corrugated ) sheets as in roof covering complete all as specified.

S & F Pre-painted galvatume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S & F Pre-painted Plain galvatume aluminum zinc coating GI vased plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F in repair mild steel,drapry rod cut to size 20mm dia with holder/bracket, stops, rollers etc, all as specified and directed by Engr-in- Charge.

Taking up or down steel tubing of bore 15mm with connections for cleaning for refixing or removing to storeyard complete all as specified .

Taking up or down steel tubing of bore 20mm with connections for cleaning for refixing or removing to storeyard complete all as specified .

M&L for steel water tubing 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

M&L for steel water tubing 20 mm dia medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

Demolation of renieforced cement concret not exeeding 15cm thickness (below or above ground level).

M&L for reinforced cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, rough finished surface of concrete complete all as specified .

S&F TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.

Dismantling water tanks and removing to store exc 250 & n.exc 500 ltrs of capacity. all as specified

S&F in repairs rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified . Make : Sintex/ISI Marked or equilent.

S&F in repair ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge Make : Hindware/Perryware/Cera/ Jaquar/Kolher/Prayag

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repair

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repair

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard and dense soil.

M&L for 100 mm thick PCC 1:4:8, type D-2 by using 40 mm graded stone aggregate as in sub base floor .

M&L for glossy finish chequred cement concrete tiles 30cm x30cm x 22mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment

M & L for sand cushioning 50mm thick on existing concrete surfaces for laying interlocking paver block including watering, consolidation, levelling etc, complete all as specifed and as directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over existing sand cushioning, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified.;

Demolition cement concrete (unreinforced) as in ground floors and pavings n exc 15 cm thickness (below or above ground level) compete.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets, Light fitting etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point/ bell point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No.2 above but One 3 pin 5 Amps socket out let points on independent board

Material and labour wiring for socket out let on independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

Supply and fixed switch socket combination 2 in 1 , 6 pin , (6 Amps & 16 Amps ) flush type controlled by one switch complete all as specified.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified.

Supplying and fixing two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. Note :- Cutting chases for conceal conduit in walls / ceilings and making good to match with the existing surface shall be deemed included in unit rate of this item).

Supplying and fixing two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC Conduit (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. Note :- Cutting chases for conceal conduit in walls / ceilings and making good to match with the existing surface shall be deemed included in unit rate of this item).

Supply and fixed bracket made out of galvanized tube 40mm dia bore (light grade) 1.50 meter long, and band as required, ,with MS clamps,nuts and bolts, complete all as specified and directed.

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply & fixing ultra slim LED batten 22 Watt, Cat part No- 22W 65K LED Batton of Make Eveready or equivalent in HPL/Havells/Bajaj/Phillips as directed by Engr-in-Charge.

Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs MCB SP, 5 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SPN 5-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 25 x 4 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

S & F earth continuity conductor or main earthing lead and supply and fixed 4 mm dia GI earth lead with clamp, connection complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fix electric water heater, storage type steel body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Schedule of Credit

M/s. S. Chandra Enterprises (BID ID -3326284)

Prahalad Rai (BID ID -3326444)

M/s.Asha Enterprises (BID ID -3325048)

M/S AVA STEEL INDUSTRIES (BID ID -3325721)

Shree Ram Construction (BID ID -3325905)

M/S. R.K. ENTERPRISES (BID ID -3325033)

M/S. KESHAB CHANDRA GHOSH (BID ID -3324450)

M/s. Mohan Enterprise (BID ID -3325711)

M/S SATISH KUMAR SINGH & SONS (BID ID -3325563)