SPECIAL REPAIR TO DRAINS AND CULVERTS AT VARIOUS PLACES AND CERTAIN MINOR WORKS AF STATION DEOLALI

Amount

Demoliton of brick work built in cement mortar as in drain, wall complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc.

Demolition of cement concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and as directed.

M&L PCC 1:3:6 type D-2 (using 40mm graded aggr) as in fdn filling and mass concrete all as specified.

M/L PCC 1:3:6 type C2 (40mm graded aggr) as in surface channels/benching and drains all as specified

M&L Brick work with sub class'B' burnt bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed

M&LReinforcement cement concrete M-25 ( Design mix) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L Cement concrete 1:2:4 (Using 20 mm graded stone agg) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M& L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

All as per item No 10Add or deduct for each 25 mm girth or part thereof over or under 30cm.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including flat rough finished surafaces of concrete complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, ladings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete ( flat ) complete all as specified and directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, andsimilar work all exceeding 20cm wide rough finished surfaces of concrete (flat) complete all as specified and directed.

Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified & directed .

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed

Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Materials & labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete.

M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete (on parapet wall) all as specified and as directed.

M&L renderig 15mm thick in cement mortar 1:6 over other than fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement

M & L for preparation of new plastered surface and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface etc complete all as specified and as directed.

S&F 32mm dia UPVC Low density polyethylene (LDPE) waste pipes of pressure rating 6 kgf/sq. cm

S & F GI tubing 15 mm bore medium grade with all fittings & fixed complete to walls or laid in floors.

S & F in repairs stop cocks 15 mm bore, chromium plated , fancy type screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

M&L non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm,(400x400) in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L preparing surfaces of wall by complete removal of existing treament and applying two coat of oil emulsion distemper on walls complete all as specified and as directed.

M&L for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar , resin type, in floors and skirting (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:4,etc complete.

Excavation in trenches not exc 1.50m wide and not exc 1.50m deep for foundation and getting out in HARD/DENSE soil all as specified.

M&L PCC 1:3:6 type D-2 (using 40mm graded aggr) as in fdn filling and mass concrete all as specified.

M & L Cement concrete 1:2:4 (Using 20 mm graded stone agg) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed

Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Materials & labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete.

Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point and disposal.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as directed by Engr-in-charge. Fe-410 (Gde-250 quality-B)

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured

M&L second class hardwood 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.

M&L Second class hard-wood in scantlings framed and fixed clean sawn.

Materials & labour for preparation of WOODEN surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete.

M&L plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm

SIDDHIVINAYAK ENTERPRISES

M/S R.K.S. CONSTRUCTION

SHREE SAMARTH SERVICES

M/S KANNANS

AISHWARYA ENTERPRISES

N.U. MIRZA

sunway associates