Construction of Warden Suite for Girls Hostel at SKIMS Medical College and Hospital Bemina Srinagar.

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m n width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All Kinds of Soil.

Providing and laying of dry stone soling in foundation on horizontal level including watering, ramming, loading, unloading and all carriages, leads, lifts, head loads complete job.

Providing and laying in position cement concrete specified grade excluding the cost of centering and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed including all carriages, leads & lifts head loads and dewatering complete job.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing. All work upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including all carriages, leads, head loads and lifts etc.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages, leads and lifts complete job.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages, leads and lifts complete job.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages, leads, lifts, head load etc. complete job.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:6 ( 1 cement : 6 fine sand) including all carriages, leads & lifts complete job.

Extra over brick work in superstructure above plinth level upto floor five level including all carriages, leads & lifts complete job.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded.

Providing & fixing tile profile colored iron sheet roofing fixed with Jor L hooks or screws with matching PVC Caps to head of screws 0.5mm thick including all leads & lifts & carriage of materials complete job.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed andfixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood including all carriages, leads and lifts complete job.

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed Butt hinges, bright finished of required size with necessary screws excluding panelling which will be paid for seperately, all complete as per directions of engineer in charge. imported wood.

Providing and fixing 35 mm thick wire guage using galvanised M.S wire guage shutters of average width for apperture 1.4 mm in both directions with wire dia .63 mm for doors,windows and clerestory windows including ISI marked M.S pressed Butt hinges,bright finished of required size with necessary screws excluding panelling which will be paid for seperately,all complete as per directions of engineer in charge. Imported wood.

providing and fixing of solid core flush doors of 35mm thickness of required section / size / specification as directed by the site engineer including cost hinges nails, screws complete job

Providing and fixing glass panes of approved quality 4mm thick clear float glass including wooden fillet/ moulded beading, putty, nails, screws complete. Glass panes weighing 10 kg / sqm.

15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) plaster for interior / exterior walls / slabs / beams including all carriages leads and lifts complete job.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125x10mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100x10mm

Providing & fixing aluminium Cate eye hoocks ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 150x10mm

Providing & fixing M.S rod locks with inbuilt sliding bolt including screws, nuts of heavy duty complete of approved quality with a pair of levers Godrej, Link or equivalent make).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 80cmx 80cm.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make colour, shades except burgundy,bottle green,black or any approved by Engineer in incharge in skirting,risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement: 3 coarse sand)and jointing with grey cement slurry 3.3 kg / sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 18mm thick Granite of any colour or shade (Area of slab over 0.5 sqm).

Extra for providing edge moulding to 18 mm thick marble stone counters,vanities etc over item no 8.2 including machine polishing to edge to give high gloss finish etc complete as per design approved by EIC.

Applying wall putty upto 2mm thickness on plastered walls and ceilings to achieve a levelled and even surface using JK BIRLA or equivalent make.

Distempering with 1st quality acrylic washable distemper (readymade) of approved brand and of required shade/color complete as per manufacturers specification. Two or more coats on new work.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proof cement paint of required shade,new work two or more coats.

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic paint of approved brand and manufacture to give an even shade two or more coats on new wood work complete job.

Providing and fixing of B-class PVC fittings/fixtures of approved make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer and adhesive.Floor Trap 100mm x 100mm dia.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing PVC waste pipe for sinks or wash basins including PVC waste fittings complete. Flexible pipe, 40mm dia.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with Concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line.

Supplying and fixing C.I. cover without frame for manholes: 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

Providing and fixing B Class PVC pipes of standard make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer and adhesive etc. 150mm.

Providing and fixing of B-class PVC fittings/fixtures of approved make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer and adhesive.Plain bend 150 mm dia.

Plain bend 100mm dia

Plain bend 75mm dia

Door bend 100mm dia

Door bend 75mm dia

PVC Reducer 100mm x 75mm.

Door tee 100x100x100mm dia.

Plain Tee 100mm dia.

PVC Collar150mm dia.

PVC Collar 100mm dia.

PVC Collar 75mm dia.

PVC Cowl 75mm x 100mm dia.

PVC Stays and clamps for PVC Pipes 100mm dia.

PVC Stays and clamps for PVC Pipes 75mm dia.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work Exposed on walls. 20mm nominal bore. (Medium)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work Exposed on walls. 25mm nominal bore. (Medium)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 20mm nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 25mm nominal bore.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 20mm nominal bore.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 25mm nominal bore.

Providing & fixing of brass ball cock with plastic ball and brass rod automatic arrangement complete with all accessories. 15mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing & fixing basin mixer of approved quality and make weighing not less than 1.970 kg.

Providing & fixing sink mixer of approved quality and make weighing not less than 1.970 kg.

Providing & fixing C.P brass health faucet of approved quality conforming to IS standards and weighing not less than 810 gms 15mm nominal bore.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing & fixing of C.P brass grating of approved quality, frame & cover complete job.

Providing & fixing of G.I tank nipples heavy duty with check nuts, washers copmlete job. 15mm to 20mm nominal bore.

Providing & fixing of C.P brass nipples of approved quality 20mm nominal bore. From 50mm upto 150mm length.

Providing & fixing wall mixer with shower Unit.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular Shape 600x450mm.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality.

M/S N B CONSTRUCTION CO

M/s ALRAHAT BUILDERS

M/S UMER SULTAN RATHER

M/S PEAKS ENGINEERS AND CONTRACTORS

M/S Shafat Ahmad Gilkar

GULZAR AHMAD BHAT

M/S CARE CONSTRUCTIONS

M/S GHULAM NABI TEELI

M/S MIRZA AHMAD IQBAL BEIGH