Construction of computer centre at DBRAIT campus, Dolly Gunj under CDI, APWD, Port Blair.SW- Repair and renovation work of pipe lines, pipe fittings, sanitary line and fittings in the PDME hostel at DBRAIT campus

Amount

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

White solid plastic seat with lid

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

25 mm nominal outer dia .Pipes.

40 mm nominal outer dia. Pipes.

50 mm nominal outer dia. Pipes.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work

65 mm dia. nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

50 to 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

50 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end) :

80 mm nominal bore

Horizontal

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

100 mm diametre

Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 :

Up to 300 mm dia.

Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :

100 mm diametre pipe

Supplying pig lead at site of work.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)

65mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:

15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :

15mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC soil waste pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,

40 mm diametre

110 mm diametre

Providing and fixing C. P. Brass pillar cock of approved quality as per the direction of EIC .

15mm nominal bore.

Providing and fixing C.P. brass health faccut (Jaguar or equivalent) with C.P brass pipe of approved quality.

15 mm nominal bore.

Providing and fixing CPVC tank connector water tank including the adhesive required etc. all complete as per the direction of EIC. For

25mm dia

Supply of water through water tanker/ truck during crisis for water including cost of hire charges of truck, driver, POL charges, cost of water all labuor charges etc. all complete as per the direction of EIC.

Providing and fixing C. P brass soap Dish Holder of approved quality as per the direction of EIC.

Providing and fixing CPVC ball valve of approved quality :

25 mm nominal outer dia. Pipes.

40 mm nominal outer dia .Pipes.

50 mm nominal outer dia .Pipes.

Providing and fixing uplasticised PVC connection pipe with brass unions :

60 cm length

15 mm nominal bore

Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC soil waste pipes conforming to IS : 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Plain bend 40mm dia

Door bend 110 mm dia

Single tee with door (110x110x110 mm )

Supplying and installation of 3Hp submerssible electric pump of make kirloskar or equivalent including wires and cables,starter & cover etc all complete and testing after installation all as per the direction of EIC.

Supplying and installation of 2Hp mono block electric pump of make kirloskar or equivalent including hose pipe etc all complete and testing after installation all as per the direction of EIC.

Supplying and installation of 3Hp mono block electric pump of make kirloskar or equivalent including hose pipe etc all complete and testing after installation all as per the direction of EIC.

Providing and fixing brass foot valve cutting etc all complete as per the direction of EIC

25mm dia

50mm dia

Providing and fixing PVC foot valve, cutting etc. all complete as per the direction of EIC

50mm dia

Supplying and installation of 1Hp mono block electric pump of make kirloskar or equivalent including hose pipes etc all complete and testing after installation all as per the direction of EIC.