Providing and installation of open gym equipment at park of Tahirpur Village in Seemapuri Constituency AC-63.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Supply and stacking at site: Good Earth as per direction of Engineer-In-Charge.

Supply and Fixing of Seated Chest Press: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached.Upright structural posts of height 2.20 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Bars of 0.97 m and Dia 48 mm while the handles are placed at a spacing of 642 mm fabricated from 40 O.D. galvanized steel pipes. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps The poles are welded on to a base plate made from steel with 114mm inner diameter. Specialized connectors such as clamps and couplings are used to connect the various components of the playground. Joints are Robotic Welded.PLAY EQUIPMENT DIMENSIONS: 1.73 m x 0.75 m x 2.20 m

Supply and Fixing of Triple Hip Twister: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. Upright structural posts of height 1.35 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail Dia 32 mm fabricated from 42 O.D. galvanized steel pipes. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps . Specialized connectors such as clamps and couplings are used to connect the various components of the playground. Diameter}. EQUIPMENT DIMENSIONS: Dia 1.6 m x 1.35 m

Supply and Fixing of Tai Chi Spinners: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. Upright structural posts of height 1.50 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Wheels of Dia 477 mm and the Handrail Dia 32 mm fabricated from 32 O.D. galvanized steel pipes. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps a. Specialized connectors such as clamps and couplings are used to connect the various components of the playground. Diameter}. EQUIPMENT DIMENSIONS: 1.25 m x 1.05 m x 1.50 m

Supply and Fixing of Seated Leg Press: " The product to match the colours, d. Upright structural posts of height 1.45 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Straight bars of 1590 mm x 60 mm carrying two seats of 0.30 m x 0.32 m fabricated from 40 O.D. galvanized steel pipes. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps. The poles are welded on to a base plate made from steel with 114mm inner diameter. Joints are Robotic Welded. -TECHNOLOGY PAINTS.