FLYPROOFING AND COMPREHENSIVE B/R REPAIRS TO ACCN, TOILETS, BATHROOMS, AND KITCHENS INCLUDING WATERPROOFING, PAINTING AND ASSOCIATED WORKS IN THE AOR OF AGE B/R NRC AT ARTY CENTRE UNDER GE NRC

Amount

Taking down carefully existing bituminous membrane/tarfelt treatment any description on roof,parapet,facias,chajjas etc and removing rubbish out of defence land. Note 1:quoted rate deems to be inclusive of removing all loose/swollen plaster.work is to be executed at any height and situation. Note 2. Any damage to existing assets/EIectrical wiring/fittngs/fixtures shall be made good by the contractor without any financial cost to the department.The same shall be deemed to be included in the contractors quoted rate.This note shall be applicable to all BOQ Items

M and L for rendering 15 mm thick(minimum) in CM 1:4 with liquid waterproofing compound(200ml per bag of cement used) on roof surfaces,parapets,facias,chajjas etc. (Note.1 Waterproofing compound shall be measured and paid separately. Note.2 quoted rate also include for hacking over roof,parapet,facia,chajja surfaces for proper bonding of plaster/PCC.work is to be executed at any height and any situation.)

M & L for waterproofing on roof including flashing and junctions of parapet,kerb,wall,chajjas etc as under-: (a) Laying a layer of APP based polymeric membrane,3mm thick(minimum),weighing not less than 3.60kg/sqm prefabricated fire layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160gms/sqm) shall be applied over compatible primer(oil based) at 0.25 litre/sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160cps or cold sticker,application of APP modified membrane shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100mm on the longitudinal direction. (b) APP membrane,Primer and bitumastic aluminium paint shall be of same brand. (c) For vertical surfaces of parapet,wall,chajjas etc. app membrane shall be tucked into groove and sealed with silicon sealant(full width/depth of groove) i.e. "Dowsil 789 weatherproof silicon sealant" using gun. (d) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15kg/sqm Make:Super Thermolay manufactured by M/s Shalimar Tar Products Ltd. /Tiki Tar Danosa India Pvt Ltd/IWL India Ltd Note.work is to be executed at any height and any situation.make of app membrane,aluminium paint shall be the same.

M & L for applying three coats of chemical waterproofing on roof/wall etc surfaces over and including preparation of surfaces to the entire satisfaction of engr-in-charge. Make:Pidilte dr fixid roof seal classic/Sika 510 cool coat IN/BASF master seal 550

Supply only liquid water proofing compound (Mak-Dr Fixit, Fosroc, Pidelite)

Disconnecting existing tanks, setting aside (or lowering if required) for repairs exc 250 n exc 500 litre, cleaning, etc. and hoisting if required reconnecting and refixing in position. (Cleaning repairing, etc. measured separately)

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises to location where directed by engr-in-charge. (Note 1. Work is to be execute at any height and situation. Note 2. Any damage to existing assets/EIectrical wiring/fittngs/fixtures shall be made good by the contractor without any financial cost to the department.The same shall be deemed to be included in the contractors quoted rate.This note shall be applicable to all BOQ Items)

M&L for vitrified ceramic digital tiles (superior quality) any light shade 8 to 9mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors/skirting etc set & jointed in neat cement slurry and painted in white or coloured cement to match. (Make:Kajaria/Somany/Johnson marbonite/orient bell )

M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry and pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately (Note: sample/size will be approved by Engineer-in-Charge) Make:Kajaria/Somany/Johnson marbonite/orient bell

M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.11 sqm but not exceeding 0.18 sqm thick set and jointed in neat cement slurry and pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately (Note: sample/size will be approved by Engineer-in-Charge) Make:Kajaria/Somany/Johnson marbonite/orient bell

M&L for glazed ceramic tiles coloured size (600x300x7 / 450 x 300 x 7) mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed (Note: sample/size will be approved by Engineer-in-Charge) Make:Kajaria/Somany/Johnson marbonite/orient bell

M&L for rendering 10mm thick in CM 1:4 as in backing coat plaster on surfaces of brick masonary or stone masonary surfaces complete all as specifed and directed

Dismantling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed (Note-Any damage to existing assets/EIectrical wiring/fittngs/fixtures shall be made good by the contractor without any financial cost to the department.The same shall be deemed to be included in the contractors quoted rate.This note shall be applicable to all BOQ Items)

M&L granite (of any type)work (table rubbed and polished)20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite complete all as specifed and directed (Note. For aluminium windows granite shall be used in jambs of windows,umbra etc,in 100mm width(minimum).contractors quoted rate deems to be inclusive of the said provision.)

M&L for hand cut cudappa stone slab 16 -18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete (Note: screed bed layer measured seperately complete all as specifed and directed)

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work complete all as specifed and directed

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed. (Note-Any damage to existing assets/EIectrical wiring/fittngs/fixtures shall be made good by the contractor without any financial cost to the department.The same shall be deemed to be included in the contractors quoted rate.This note shall be applicable to all BOQ Items)

M&L Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

M&L Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

M&L PCC 1:4:8 type D2 (using 40mm graded aggregate as in sub base / foundation filling mass concrete complete all as specifed and directed

Taking down and Re-fixing only 20mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed (Note-Any damage to existing assets/EIectrical wiring/fittngs/fixtures shall be made good by the contractor without any financial cost to the department.The same shall be deemed to be included in the contractors quoted rate.This note shall be applicable to all BOQ Items)

All as per item No. 21 above but 15 mm bore.

S/F in repair for tubes medium grade,20mm dia galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed ( Note. Work is to be execute at any height and situation. Make:Swastik/Prakash/Jindal) (Note-Any damage to existing assets/EIectrical wiring/fittngs/fixtures shall be made good by the contractor without any financial cost to the department.The same shall be deemed to be included in the contractors quoted rate.This note shall be applicable to all BOQ Items)

All as per item No. 23 above but 15 mm bore.

S&F in repair PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) B-1 dia of outlet 75mm complete all as specifed and directed (Make -Supreme,Prince,Finolex)

S&F repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe of fixed and repairs (minimum weight 90 gms) complete all as specified and directed (Make- Prayag, Zoloto, Jaypee)

S & F in repairs Long body bib tap with wall flange complete all as specified and directed. Make:Jaquar(cat part No:CON-107KN)/Hindware(cat part No:F-340004CP)/Kohler(cat part No :16093IN-CP)

S&F in repairs 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. (Make Jaguar Cat Part No: FLR 5041N/ Hindware Cat No. F380003/Cera Cat No.F1016163 )

S & F in repairs Pillar cock with 140mm extension body complete all as specified and directed. (Make:Jaquar(cat part No:ARI-39021)/Hindware(cat part No:F360002)/cera(cat part No:F1021101)

S & F in repairs wall mixer with provision for Overhead shower with 115 mm Long bend pipe on upper side,connecting legs & wall flanges complete all as specified and directed. (Make: Jaquar(cat part No-FLR 5273UPR)/Hindware(cat part No :F390020)/cera(cat part No:F2002401)

S & F in repairs Angular stop cock with wall flange complete all as specified and as directed. Make:Jaquar(cat part No:CON-059KN)/Hindware(cat part No:F200005FT)/kohler(cat part No:k-80154IN-4AV-CP)

Demolition of brick work/stone work built in cement mortar. including coping but except ashlar facing dressed stone work to precast concrete article complete all as specified and directed (Note -. Any damage to existing assets/EIectrical wiring/fittngs/fixtures shall be made good by the contractor without any financial cost to the department.The same shall be deemed to be included in the contractors quoted rate.This note shall be applicable to all BOQ Items)

M&L for Brick works with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specifed and directed

M&L for walling of random rubble uncoursed, well bonded, bedded to solidly hearted built in cm (1:6) complete all as specified and directed

M&L for brick work withfly ash bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specifed and directed

S/F in repair triple layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltr.(Make Sintex, Infra, Aashish Plast )

S&F in repairs Ball brass valves, high pressure, with polythene float and flynut for 20mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed Make:Prayag/Jaypee/Zolota

S&F in repair 20 mm Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed Make:Prayag/Jaypee/Zolota)

S&F in repair 110mm PVC (SWR) pipe single socketed any length with rubber ring joints fixed to wall complete all as specified & directed bore of pipe in mm complete all as specifed and directed (Note. The quoted rate deems to be inclusive of PVC fixing clampls.work is to be executed for high rise bldgs) Make:Supreme/Finolex/Astral

All as per item No. 39 above but 75mm bore.

S&F of 110 PVC(SWR) bends of any radius

All as per item No. 41 above but 75mm bore.

S&F of PVC(SWR) branch piece,single(single Y) 110/75 mm dia equal or unequal

S&F of PVC(SWR) vent cowl of 75/ 110mm bore

S and F 110/75 mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed.

S&F in repair grating doom PTMT of 100mm dia complete all as specifed and directed

S&F in repairs vitreous china water closet squating pan Orissa pattern 580 X 440mm white with integral foot rest and P/S trap complete including lime concrete bedding complete all as specified and as directed.(Make Cera Cat No CALINA S3010110)/Hindware Cat No. 20070/ Johnson Pedder Cat No. J83651C)

S & F in repairs Vitreous china wash down water closet (pedestal pattern) of size 520x360x390mm , snow white including plastic water closet seat, closed pattern with flat bottom , and cover and mild steel choromium plated or aluminium hinging device complete fixed. (Make Cera Cat No. S1053101 P or S trap/ Hindware Cat No.20011 S-28.5 P-18/Johnson Pedder Cat No. J85601C)

S & F in repairs CP health faucet ABS body suitable for 15mm bore with 1.00m ss braided flexible connection pipe and wall hook complete all as specified and as directed. (Make Cera Cat No. F8030111AB / Johnson Pedder Cat No. JF803599/Hindware Cat No. F160110) .

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level of 10 ltr capacity, SNOW white with inlet, ball valve, float and handle including brackets the exposed surfaces of brakets shall be painted with two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed. (Make Cera Cat No. B1020109 / Hindware sleek essence single flush/Johnson Pedder P8827PW0001)

S and F in repair vitreous china counter type oval shape wash basin, snow white, size 560 X 470x190 mm or equivalent including cutting for and pinning in for bracket and 32mm dia CP waste coupling with wall mount stainless steel chrome finish 450mm bottle trap set with waste outlet pipe and connection to drain pipe complete all as specified and as directed.(Cat No. Cera S2030104_13 / Hindware Cat 10017/Kohler K-2075IN-1-0 )

S&F in repair Single bowl sink manufactured from 1.0 mm thick 304 grade stainless steel of size 510 x 430 mm (20" x 17") and depth 203 mm (8") top mount with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe (Cat No. Cera B4511104 dora gloss finish/Bluestar SSSB-06A, BSSB-06A/Diamond Corner Radius Single Bowl Sink-1720 08 )

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

S&F in repair Vitreous China bowl urinal flat back, size of 315X265X440 mm white (minimum),with grating and union for discharge pipe including suitable height of flush pipe of polyethylene of high density 32 mm dia complete all as specifed and directed (Make Cera Cat No S4020104/Jagquar Cat No.URS-WHT-13261H/ Hindware Cat. No.: 60020)

S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm.

S&F in repair stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed (Make- Prayag, Zoloto, Jaypee)

S&F in repair Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and directed (Make- Prayag, Zoloto, Jaypee)

S & F in repairs wall mixer with provision for Overhead shower with 115 mm Long bend pipe on upper side,connecting legs & wall flanges complete all as specified and directed. Make: Jaquar(cat part No-FLR 5273UPR)/Hindware(cat part No :F390020)/cera(cat part No:F2002401)

S&F in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms complete all as specified and directed (Make- Prayag, Zoloto, Jaypee)

M&L for special treatment to sunken portion with 10 mm thick plaster in CM 1:4 with WPC liquid conplast 421 and applying one coat each of Nitoproof 100 & Nitopro 120 on plastered surface . Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC & CI/PVC pipes joint shall be filled/jointed with mixture of cement fine sand and nitoproof 130 and provided hole in the wall & fixed 600 mm long 20 mm dia spout light grade & 1:3:6 C2 filling , floor area of wc upto 1.5 Sqm etc complete all as specified and directed.

Taking down shutters exc 1 Sqm but n exc 2Sqm complete all as specified and directed

Taking down shutters n exc 1 Sqm complete all as specified and directed

Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4 sqm each.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) but n exc. 1.5 Sqm

Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

M&L for 2nd class hardwood in scantling exc 25 Sqcm and n exc 40 Sqcm Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified and directed (Make- M/S India Wood & Wood P Ltd Mangalore / M/S MP Wood Products, Indore / M/S A1 Teak Products, Indore )

S&F IInd class hard wood factory made Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed (Make- M/S India Wood & Wood P Ltd Mangalore / M/S MP Wood Products, Indore / M/S A1 Teak Products, Indore )

S & F 35 mm thick Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed (Make- M/S India Wood & Wood P Ltd Mangalore / M/S MP Wood Products, Indore / M/S A1 Teak Products, Indore )

S&F for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/ Ceosetory windows & other frames/ Chowkhat of size 65x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/rajshree/Navaratan Note : rate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . Note. Work is to be execute at any height and situation. Make:Rajshree plastiwood/Navratana/Duroplast

S&F for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/rajshree/Navaratan Note : rate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . Note. Work is to be execute at any height and situation. Make:Rajshree plastiwood/Navratana/Duroplast

S&F 30 mm thick moulded Prelaminated both side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on front side with wood grain texture on front and plain on back side with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) . Note. Work is to be execute at any height and situation. Make:Rajshree plastiwood/Navratana/Duroplast

S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified Make:Rajshree plastiwood/Navratana/Duroplast

S&F Factory Made 25mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by "raJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N (Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company Make:Rajshree plastiwood/Navratana/Duroplast

Material & Labour for painting with two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of new wooden surfaces all as specified and directed by EIC. (Note- preparation on surface with grit sandpaper for initial sanding and thereafter switching to finishing touch, sanded machine will be applied surfaces wherever directed by Engineer-in-Charge)

S&F aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators, complete all as specifed and directed Make:Jindal/Hindalco/Indal

S & F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including 5.50mm thick black tinted sheet glass in top half portion and suitable prelaminated particle board fix in bottom half portion of door shutter complete all as specifed and directed Make:Jindal/Hindalco/Indal

S&F powder coated of powder coating 50 micron sliding window, three track shutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass of 4mm thick black tinted and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm, size of side rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37 complete all as specified and as directed.Make:Jindal/Hindalco/Indal

S&F for powder coated of powder coating 50 micron aluminium ventilator shutters with frame not less than 0.45Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm, shutters aluminium sections weighing 0.45 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. Make:Jindal/Hindalco/Indal

S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) with 4.00mm thick black tinted sheet glass complete all as specified Make:Jindal/Hindalco/Indal

S&F Sheet glass ordinary quality 4.00 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed (Make-Saint Gobin, Modi Float , Modiguard )

S&F in repair Sheet glass ordinary quality 4.50 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers in aluminium windows/doors incl connecting accessories with taking down and refixing of aluminium windows/doors complete all as specifed and directed (Make-Saint Gobin, Modi Float , Modiguard )

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm and fixed in aluminium windows, wooden doors etc complete all as specified.

S&F Sheet glass ordinary quality 4.00 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed (Make-Saint Gobin, Modi Float , Modiguard )

Material & Labour for painting with one coat of synthetic enamel paint on old wooden/steel surfaces exc 10cm width or girth including preparation of old wooden surfaces all as specified and directed by EIC. (Note- preparation on surface with grit sandpaper for initial sanding and thereafter switching to finishing touch, sanded machine will be applied surfaces wherever directed by Engineer-in-Charge)

Material & Labour for painting with one coat of synthetic enamel paint on old steel surfaces exc 10cm width or girth including preparation of old wooden surfaces all as specified and directed by EIC. (Note- preparation on surface with grit sandpaper for initial sanding and thereafter switching to finishing touch, sanded machine will be applied surfaces wherever directed by Engineer-in-Charge)

S&F 75 mm Butt hinges,medium weight cold rolled Stainless steel all as specified & directed. approved by Engineer-in-Charge (note-Make- Plantex , Atom , Universal or ISI marked and approved by Engr-in-Charge)

S&F 100 mm Butt hinges,medium weight cold rolled Stainless steel all as specified & directed. approved by Engineer-in-Charge (note-Make- Plantex , Atom , Universal or ISI marked and approved by Engr-in-Charge)

S&F stainless steel tower bolt 150 mm long complete all as specified and directed approved by Engineer-in-Charge. (note-Make- Plantex , Atom , Universal or ISI marked and approved by Engr-in-Charge)

S&F 150 mm stainless steel handels pull type complete all as specified and directed approved by Engineer-in-Charge. (note-Make- Plantex , Atom , Universal or ISI marked and approved by Engr-in-Charge)

S&F aluminium extruded section body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed (note-Make- Plantex , Atom , Universal or ISI marked and approved by Engr-in-Charge)

S&F stainless steel sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed (note-Make- Plantex , Atom , Universal or ISI marked and approved by Engr-in-Charge)

S&F in repair Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed by Engr-in-charge

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width n exc 10cm

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

S&F in repair for 18 mm thick PVC sheet prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side with white lamination including necessary locking device, catches suitable for kitchen cabinets as in kitchen cabinets incl 4mm thick PVC beading on all edges etc complete all as specified and directed.

S&F 2inch plastic door magnet catcher white colour with complete accesoories for cupboard, kitchen cabinet all as specified & directed approved by Engineer-in-Charge

S&F 150mm fancy chromium plated handles incl all accesoories for cupboard, kitchen cabinet all as specified & directed approved by Engineer-in-Charge (note-Make- Plantex , Atom , Universal or ISI marked and approved by Engr-in-Charge)

S&F 75mm stainless steel soft close hinges incl all accesoories for cupboard, kitchen cabinet all as specified & directed approved by Engineer-in-Charge (note-Make- Plantex , Atom , Universal or ISI marked and approved by Engr-in-Charge)

S & F 30 mm width flap Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

M&L for Complete removal of existing treatment and applying 3 mm thick wall care putty incl primer coat as prepratory to distemper and applying two coats of oil bound emulsion white or tinted on walls. Make:Asian tractor UNO/Berger bison acrylic distemper/Nerolac beauty. (Note- preparation on wall putty with grit sandpaper (120) for initial sanding and thereafter switching to fine grit sandpaper (180-220) for finishing touch, sanded machine will be applied on internal walls wherever directed by Engineer-in-Charge)

M&L for complete removal of existing wall surfaces and applying two coats of Acrylic weather proof exterior paint over water based primer including prepare of surface complete all as specified and directed Make:Berger weather coat long life 10/ Asian apex ultima/Nerolac excel no dust

S&F in repairs for Indoline marine ply 18-20mm thick for kitchen cabinets front shutters sides , rear side of SILEX , SLEEK (Asian paints) or equivalent provided below kitchen platform in modular kitchen including all ss fixtures and fittings with ss framework of suitable size if required made out of ISI mark shutters of Indoline marine ply complete all as specified and as directed by Engineer-in- Charge.

S&F in repair chrome plated stainless steel wire basket 5mm dia of wire (storage basket) pull out type for large utensils, size 480x500x150mm of SS grade 304 with necessary fixing clips etc. including stainless steel work for basket of SS grade 304 Sq pipe 20x20&1mm thick complete all as specified and as directed by Engineer-in- Charge. (Note:quoted rate deems to be inclusive s & f of Plantex profile handle of length 450 mm to 600 mm on WPC board.) Make Godrej,Hettich,Hafele

S&F in repair chrome plated stainless steel wire basket 5mm dia of wire (cup and saucer basket) pull out size 380x500x150mm of SS grade 304 with necessary fixing clips etc. including stainless steel work for basket of SS grade 304 Sq pipe 20x20&1mm thick complete all as specified and as directed by Engineer-in- Charge. (Note:quoted rate deems to be inclusive s & f of Plantex profile handle of length 450 mm to 600 mm on WPC board.) Make Godrej,Hettich,Hafele

S&F in repair chrome plated stainless steel wire basket 5mm dia of wire (plate basket) pull out type, size 380x500x100mm of SS grade 304 with necessary fixing clips etc. including stainless steel work for basket of SS grade 304 Sq pipe 20x20&1mm thick complete all as specified and as directed by Engineer-in- Charge. Note:quoted rate deems to be inclusive s & f of Plantex profile handle of length 450 mm to 600 mm on WPC board. Make Godrej,Hettich,Hafele

S&F in repair chrome plated stainless steel wire basket 5mm dia of wire (cutlery basket) pull out type, size 380x500x100mm of SS grade 304 with necessary fixing clips etc. including stainless steel work for basket of SS grade 304 Sq pipe 20x20&1mm thick complete all as specified and as directed by Engineer-in- Charge. (Note:quoted rate deems to be inclusive s & f of Plantex profile handle of length 450 mm to 600 mm on WPC board.) Make Godrej,Hettich,Hafele

S&F in repair chrome plated stainless steel wire basket 5mm dia of wire (Grain trolley) pull out type, size 480x500x100mm of SS grade 304 with necessary fixing clips and sliding frame structure etc. including stainless steel work for basket of SS grade 304 Sq pipe 20x20&1mm thick complete all as specified and as directed by Engineer-in- Charge. (Note:quoted rate deems to be inclusive s & f of Plantex profile handle of length 450 mm to 600 mm on WPC board.) Make Godrej,Hettich,Hafele

S&F in repair chrome plated stainless steel wire basket 5mm dia of wire (Bottle pull out) pull out type two self, size 120x500x432 mm of SS grade 304 with necessary fixing and sliding frame structure clips etc. including stainless steel work for basket of SS grade 304 Sq pipe 20x20&1mm thick complete all as specified and as directed by Engineer-in- Charge. Make Godrej,Hettich,Hafele

S&F stainless steel heavy duty soft closing drawer channel suitable to modular kitchen 450 mm length all as specified & directed approved by Engineer-in-Charge Make: Hexa,Hettich,Hafele.

S&F ball bearing runners 450mm telescopic channel(KTS-20) full extension load capacity 50Kg. Make:Godrej,Hettich,Hafele

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. all as specified and directed

M&L for rendering 15mm thick in cement mortar(1:6) on Stone masonry surfaces, concrete surfaces or fair faces of brick work and finishing even and smooth

M&L for preparation of plastered surfaces of walls and applying two coat of oil bound distemper over a coat chalk whitening primer with 3mm thick of wall care putty prepatory to distemper on walls.Make:Asian tractor UNO/Berger bison acrylic distemper/Nerolac beauty. (Note- preparation on wall putty with grit sandpaper (120) for initial sanding and thereafter switching to fine grit sandpaper (180-220) for finishing touch, sanded machine will be applied on internal walls wherever directed by Engineer-in-Charge)

M&L rendering 15 mm thick cement mortar on stone surfaces, concrete surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement

M&L for preparating newly plastered surfaces of walls and applying two coats of Acrylic weather proof exterior paint over water based primer including prepare of surface complete all as specified and directed Make:Berger weather coat long life 10/ Asian apex ultima/Nerolac excel no dust

M & L 05 mm thick rendering in CM 1:4 on concrete surface as in ceiling surface finished even and smooth without using extra cement.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing. (Make JSW AZ-150 or equivalent in TATA AZ-150, ESSAR AZ-150 )

M and L three coat of white wash on on ceiling including preparation all as specified and as directed.

M&L for 600X600X13 to 15 mm thick high traffic fully vitrified pavement tiles jointed in neat cement slurry and pointed in white/coloured cement to match with colour/shade of tiles all as specified and directed by Engr in Charge. (Make:Kajaria/Somany/Johnson Endura / orient bell )

M&L for 600X1200X13 to 15 mm thick high traffic fully vitrified pavement tiles jointed in neat cement slurry and pointed in white/coloured cement to match with colour/shade of tiles all as specified and directed by Engr in Charge. (Make:Kajaria/Somany/Johnson Endura / orient bell )

S&F in repair Aluminium Composit Panel (ACP) sheet with 1"x1.5" aluminium tube of 0.90-1.00 mm thick over the framed as in walls, columns, walls or whrever located and directed by Engineer-in-Charge, ACP shall meet undermentioned tech requirements. (i) Coating on front : high quality polymer resin. (ii) Core : FR Core (Fire retardant) (iii) Thickness : 4mm (iv) Weight : 7.50Kg/Sqm (v) Temp Resistance : Between -50C to +80C Note : Rate is deemded to be inclusive of scaffolding required and joint sealing

UNITED ENTERPRISES (BID ID -3470235)