Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹17.8 LAccepted-AOC 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹20.2 LRejected-Finance | SECOND | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹17 L
EMD Value
₹34,000
Closing Date
25 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
REPAIRS AND MAINTENANCE INCLUDING INTERNAL SERVICES TO CERTAIN BUILDINGS AT 26ED AND GAGAN VIHAR CAMP UNDER GE AF MARATHAHALLI
2022_MES_547959_1
8985/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) MARATHAHALLI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (AF) MARATHAHALLI
₹34,000
Yes
25 Nov 2022
26 Aug 2022
30 Sept 2022
26 Aug 2022
25 Sept 2022
12 Sept 2022
Amount
Demolition of Cement concrete in ground floors and pavings n exc 15cm thickness (below the ground level) cement concrete unreinforced complete.
Demolition of Cement concrete above ground floors as in sunken floors of toilets etc exc 15 cm thick complete
M&L 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded crushed stone aggregate as in plinth protection and paving finishing concrete surface even and smooth without using extra cement
M&L PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in kerbs, copings, padding cement concrete to bring the slops towards spouts in sunken floors etc including necessary form work complete.
M&L for water proof plastering15mm thick to bottom and sides of sunken floors in Cement Mortar 1:3, using WPC as per manufacturer instructions, surface finished even and smooth but using extra cement all as specified.
Supply only integral water proofing compound all as specified
S&F 40mm bore HDPE pipe as in spout pipes in sunken floors.
M&L for application of two coats of blown bitumen to concrete/wall surfaces applied hot of grade 85/25 at the rate of 1.5Kg/Sqm per coat conforming to IS 702 over a coat of primer @ 0.30 Kg per Sqm all as specified.
S & F 3 to 4mm thick APP based polymeric membrane minium weight 3 Kg/Sqm and minium 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/Sqm) land on painted surface by force application complete all as specified
M&L PCC 1:5:10 type E2, lean concrete using 40mm graded crushed stone aggregate as in filling of sunken floors complete all as specified .
Dismatling floor, hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified
M&L for non skid coloured ceramic tiles 7mm thick of size 300mX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:6 complete all as specified .
M&L for glazed coloured wall tiles of 300X200X6mm as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10mm thick cement plaster in 1:4 as backing coat complete all as specified
Taking down cement or cement lime plaster on brick or stone wall/ceiling etc. including racking out joints, hacking for key, scrubbing down with water etc., all as specified and directed.
M & L for rendering 15mm thick in Cement mortar (1:4) on brick and concrete surfaces finished even and smooth without using extra cement complete all as specified
Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.
All as per item No 16 above but 20 mm bore GI tubing.
Refixing old serviceable steel tubing 15 mm bore with new fittings in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note: Serviceable tubing shall be obtained from item No. 16 here in before)
All as per item No 18 above but 20 mm bore GI tubing.
S&F GI pipe medium grade 15mm bore fixed to wall wall and ceiling or laying in floors, with all new fittings as required at site complete
All as per item No 20 above but 20 mm bore GI tubing.
S&F of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fitting fixed complete to walls, ceiling or laid in floors etc including short length , with all pipe fittings such as ends, elbow, unions, tee, reducing tees etc. including taking down all as specified and directed by Engr-in-Charge
All as per item No 22 above but 20 mm outer dia.
All as per item No 22 above but 25 mm outer dia.
M&L for Rotational moulded polyethylene water storage tank of 500 ltrs capacity ISI MARKED (Cylindrical vertical with closed top) hoisted and fixed in position including taking down the old tank all as specified and as directed.
All as per item No 25 above but 1000 ltrs capacity .
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 500 ltr but n exc 1000 ltr complete all as specified and directed.
S&F in repair Chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.
S&F in repair 15mm bore pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair stop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule.
S&F in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed.
S&F in repair 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed. Make: Prayag /Sintex
S&F in repair 15 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed. Make: Prayag /Sintex
All as per item No 33 here-in-before but 20 mm dia complete all as specified and directed.Make: Prayag /Sintex
All as per item No 33 here-in-before but 25 mm dia complete all as specified and directed.Make: Prayag /Sintex
S&F in repair PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.
S&F Grating 150mmx150mm made out of stainless steel complete all as specified and directed.
S&F in repair 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.
S&F in repair PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer omplete all as specified and directed.
S&F in repair PVC EWC anti microbial seat cover hygenic type for padestral pattern including all fitting complete all as specified and directed.
S&F in repair soap dish (Any Type) fixed to wall with brass chromium plated screws complete all as specified and directed.
S&F in repairs chromium plated toilet paper holder.
S&F in repairs chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia
S&F in repairs for PVC low level flushing cistern, white, 10 Ltrs capacity complete with all internal accessories & fixed to wall & making good to wall surfaces incl. taking down existing flushing cistern complete. Make : Cera/ Hindware
S&F in repair round moulded PVC water tank lid for specially 500 Ltrs, 1000 Ltrs complete all as specified and directed.
S&F in repair of CP Health faucet complete set with 1.5 mtr long pipe abd fittings complete all as specified and as directed. Make Cera/ HINDWARE
S&F in repairs Cast Iron brackets 450mm long made with ISA 25x3mm suitable for wash hand basin complete all as specified and approved
S&F in repairs brass chromium plated wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete
S&F in repairs 32 mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.
S&F in repairs Vitreous China wash down water colset (Squat pattern) white complete as fixed in repair excluding flushing cistern and flush pipe "Orissa" pattern size 580x400 with integral footrest inject connection to trap antisyphonage etc complete incl joint between flushing pipe and socket of WC complete all as specified and directed.
S&F in repairs Vitreous China wash down water closet (EWC) (Anglo Indian type (pedestal pattern)white complete as fixed in repairexcluding flushing cistern and flush pipe and trap white including fixing bolts,WC seat cover of fixed with aluminium or ms chromium plated complete all as specified.
S&F in repairs Vitreous China wash hand basin, flat back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket complete all as specified and directed.
S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps complete all as specified and directed.
S&F in repairs110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps,complete all as specified and directed.
S&F in repairs 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed
S&F in repairs 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete all as specified and directed.
S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as directed
S&F stainless steel kitchen rack made of 0.63 mm thick stainless steel sheet of size 900 mm x 900 mm x 250 mm fixed to wall with screws complete all as specified and directed.
S&F in repair 100 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed
S&F in repair 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed
S&F in repair 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed.
S&F in repair mild steel butt hinges of 75 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed
S&F in repair mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed
S&F in repair 100 mm size extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed
S&F in repair 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed
S&F in repairs 100 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repair 20 mm dia D type chromium plated towel rail 600 mm long between and including flanges complete all as specified and directed.
S&F in repairs 25 mm dia aluminium powder coated tubular curtains rod including fixing brackets complete all as specified and directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed.
S&F in repairs sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and directed.
S&F in repairs 3.00 mm thick figured glass pin head type obscured or frosted on one side and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed
S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed.
S&F in repair glass shelf(450x150mm) with chromium plated guard complete all as specified and directed.
S&F in repair aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed. Make : Dyna and equivalent ISI marked
S&F necessary weldings in Repairs 2.5 cm but n exc 5cm thick of metal to be welded n. exc. 6 mm thick complete all as specified and directed.
M & L for preparating surfaces plastered or unplastered surfaces of wall and applying two coats of oil bound distemper complete all as specified & directed by Engr-in charge .
Demolition of cement concrete (reinforced)(other than ground floors), staircases, landing,chajjas and similar suspended work.(Note: Height of the building varies from 3m to 10m from GL) all as specified and as directed.
Demolition of cement concrete/ removal of waterproofing membrane/roof tiles (unreinforced)(other than ground floors),roofs and similar suspended work.(Note: Height of the building varies from 3m to 10m from GL) all as specified and as directed.
Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc all as specified and as directed.
Roughening surfaces of old concrete/brick floor by picking, sweeping clean and washing down with water to remove dust, etc. & brushing neat cement slurry with 3.0kg of cement per sq. metre all as specified and directed.
Removing by cutting/up rooting plant/tree under surface of wall/celling/roof including pouring of acid on the place and making good the damage portion with cement mortar 1:3 or concrete 1:2:4 type B1 using 20 mm graded aggregate complete and removing of material retrived from above work to outside of MoD land all as specified and as directed (Note: Height of bldg is upto 3m)
Removing by cutting/up rooting plant/tree under surface of wall/celling including making good the damage portion with cement mortar 1:3 or concrete 1:2:4 type B1 using 20 mm graded aggregate complete all as specified and as directed(Note: Height of bldg is from 3m to 10m from GL)
M&L for Reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) as in slab supported on wall, beam ,roofs, landing, chajja, shelves etc all as specified and as directed.
M&L for mild steel bars 8 mm dia and over TMT bar, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed.
M & L formwork to sides and soffits of chajjas, lintels for flat fair finished surfaces of concrete all as specified and as directed.
M & L for Formwork to soffits of suspended slabs such as lintels,chajjas and similar work , with supports and fair finished surfaces of concrete
M & L for Providing, cement concrete 1:2:4 , type B-0(12.5mm graded crushed stone aggregate) in lintels/chajjas upto 1.5m clear span, cills, steps; including weathering, slightly rounded or chamfered angles and throating, including necessary form work all as directed
Refixing of wooden shutters in same opening exceeding 1Sq.m. and not exceeding 2 Sqm each all as specified and as directed. (Note :`refixing' includes taking down, easing and ajusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.) etc all as specified and as directed.
M&L for 40 mm thick cement concrete 1:2:4 type B-1 (20 mm graded crushed stone aggregate) in sub floor & paving all as specifed and directed.
M&L for 50 mm thick cement concrete 1:2:4 type B-1 (20 mm graded crushed stone aggregate)as in padding concrete on roof all as specifed and directed.
M&L 25 mm thick PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate in floor all as specified and directed.
M&L for Pre-cast cement concrete block masonry 1:3:6, type C-1 (20 mm graded crushed stone aggregate) with solid blocks, exc.10cm in width and setting in mortar complete in cement mortar 1:6 all as specified and directed.
M & L for Dubbing out average 10mm thick on irregular face of walls in cement mortar 1:6 all as specified and as directed.
M&L two coat of cement based paint on undecorated wall surfaces including preparation of new plastered surfaces all as specified and directed.
M & L for Machine cut kota stone slab flooring 20mm thick over 15mm thk cement screed base laid in mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M & L for Machine cut kota stone slab flooring 20mm thick over 15mm thk cement screed base laid in mortar 1:4 in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto all as specified
M & L for Glazed ceramic tiles in vertical surface 450mm x 300mm x 7 mm thick, dark coloured,on wall surfaces including designer pattern, set and jointed in neat cement slurry and pointed in white cement with pigment to match over 10 mm thick rendering in Cement Mortar 1:3 all as specified and as directed.
M & L for Joint free Non - skid colored Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry 15mm thk cement screed base laid in mortar 1:4 and pointed in white or coloured cement to match all as specified
M & L for Joint free Non - skid colored Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces such as skirtings, dados and risers to steps etc. etc. set and jointed in neat cement slurry 15mm thk cement screed base laid in mortar 1:4 and pointed in white or coloured cement to match all as specified
M & L for Repairs/Renewing glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and as directed
M & L for Repairs/Renewing cement concrete tiles/ceramic tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete complete all as specified and as directed
M & L for 20mm thk Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and 15mm thk cement screed base laid in mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M & L for Chequered cement concrete tiles 30cm x 30cm x 25cm thick jointed with grey pigment cements/pigments and pointed in neat cement slurry in floors 15mm thk cement screed base laid in mortar 1:4 including pointing in white cement (1:2) all as specified and as directed.
M&L for labour for preparation of surface by removing dust, dirt and applying oil bound bitumen primer @0.20Kg/sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0Kg/sqm reinforced with non woven polyester matt weighing not less than160gm/sqm having softening point not less than 150̊ degree centigrade, having tensile strength of 650N/sqcm and 350N/sqcm in longitudinal and transverse directions respectively of the reinforcement tearing strength of180N by torch application with minium 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumin 90/15 over the membrane @ 1.2Kg/sqm and on drying apply a coat of solar reflective bituminous aluminium paint over membrane @ 0.1kg/sqm all as specified and directed.
Removing building materials etc to a distance of 5km, beyond the lead included in the rates, including loading, unloading and stacking at the destination.
M&L for writing letters or figure/Black, Roman, Italic or Indian (n.exc 30cm height) complete all as specified and as directed.
M&L for two coates of oil bound distemper over a unit of water resistant primer on newly plaster similar including preparation.
C R R CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .