Loading
Loading…
Loading…
Tender Value
₹24.9 L
EMD Value
₹49,875
Closing Date
22 Jun 2026, 3:30 pm6d left
Superintending Engineer
IWD IIT Kanpur
SITC of AHU pipes and valves with associated works at UG lab 1 and 2 in Mechanical Engineering NL 1 Building IIT Kanpur
2026_IITK_912171_1
11/AC/SE/2026/75
Open Tender
Electrical Works
60 days
IIT Kanpur
As per tender
2 documents required · 2 mandatory
₹0
₹49,875
9 Jun 2026
9 Jun 2026
23 Jun 2026
9 Jun 2026
22 Jun 2026
9 Jun 2026
9 Jun 2026 - 19 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Supply, Installation, Testing and Commissioning of AHRI certified, double skin sheet metal construction, thermal break profile, with direct coupled EC fan and Ceiling suspended air handling units without mixing box, with supply air damper air (AL) damper, with injected PUF of density not less than 40Kg/CuM and .The air handling units shall be complete with 50mm thick synthetic type pre- filters with Aluminium wire mess, cooling coil (minimum thickness 0.5mm ) section with 6/8 RD seamless solid drawn copper tubes and aluminium fins construction, fan section shall be AMCA certified centrifugal type plug fan complete with direct driven package, limits switch, marine light & stainless steel drain pan ( minimum thickness 1.25 mm and 13 mm close nitrile insulation ) and vibration isolation spring/cushy-foot mount/hanging arrangement. AHUs shall be selected for a maximum face velocity of 500 FPM (2.5 MPS). Maximum outlet air velocity shall not exceed 2000 FPM (10.1 MPS). With speed controller of EC Fan as per specifications, with 2-way motorised valve and thermostat based controller for temperature and speed control. | ||||||
| 1.1 | 3000CFM, Ceiling mounting, 35 mmwc static, with 50 mm thick PUF injected | 6 | Nos. | 2,64,262 | ₹15,85,572 | item2 |
| 2CHILLED WATER PIPING | ||||||
| 2.1 | Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled/condenser water piping plumbing i/c fabrication of bends / elbows, tees, reducers etc) inside the building (with necessary clamps, wooden/puf support, vibration isolators, primer/ enamel paint, fittings but excluding valves, strainers, gauges etc.) as per specifications and as required complete in all respect.
Note:- The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. | - | - | - | - | item4 |
| 2.2 | 25 mm | 10 | Mtr | 830 | ₹8,300 | item5 |
| 2.3 | 32 mm | 5 | Mtr | 946 | ₹4,730 | item6 |
| 2.4 | 40 mm | 26 | Mtr | 1,147 | ₹29,822 | item7 |
| 2.5 | 50 mm | 26 | Mtr | 1,403 | ₹36,478 | item8 |
| 2.6 | 65 mm | 26 | Mtr | 1,765 | ₹45,890 | item9 |
| 2.7 | 80 mm | 30 | Mtr | 2,045 | ₹61,350 | item10 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
Tendernotice_2.pdf
PDF • 1.05 MB
BOQ_958652.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
