Additional Works in Regional Centre for Lalit Kala Akademi, Kolkata

1. Gallery Lights

1 Supply, installtion, testing and commissioning of track control.x 1000 mm/2000mm for surface mounting or suspended mounting, VDE-compliant 3 (5)-circuit tracks,

control cables (DALI or1-10V) integrated in a touch-proof manner, compatible with new DALI adapters and all conventional 3-circuit adapters, mixed operation of

different adapters is no problem. It can also be used to operate emergency lighting luminaires, control.x and 3-circuit accessories can be used tracks made of a

stable, extruded aluminium profile 3 x 16A for particularly long track systems, approved to be used within easy reach, the track can be cut without reworking the

copper conductors, material: aluminium, length: 1000 mm or 2000mm as per site condition, width: 35.3mm, height: 36.5 mm weight: 1.04 kg protection rating: IP20,

protection class I, colur white (RAL9016) with 5years warranty. equivalent model no-110 102 00 910 D of Hoffmeister. Rates is inclusive of all other assesories as

per annexure I mentioned below

L-Connector 90⁰ Coupler Control X, X coupler, 3-circuit with optional power input , End Supply Coonector Control.x earth Conductor Position right, Straight

2 Supply, Installation, Testing and commissioning of track mounted 14 W Contour spotlight suitable for 3 circuit DALI adapter for control with including, focusable No 9 105,190.59

driver inserted into the trackspot, passive thermo management with LED 1200 lm, colour temperature: 3000K, colour rendering index: CRI >90 L90 / B10 (50,000h),

SDCM < 2, Contour spotlights fresnel lense, glass-lens focusable LED power unit integrated in adapter, electronic (DALI), 220-240 V, 50 Hz amplitude dimming

range: 100-0.5 %, housing of die cast aluminium adapter of fibreglass reinforced thermoplastic framing attachment with holder metal, black . The fixture should of

length min: 221 mm, width: min 84 mm, rotatable 360°, 90° tiltable, weight: 1.52kg, protection rating: IP20, protection class I, maximum ambient temperature: 35 °,

Certificates: manufactured in according to DIN VDE 0711 / EN 60598, CE colour: white (RAL9016) , fixture should have warranty of 5 years. equivalent Model no- 112

3 Supply, Installation, Testing and Commisioning of Track mounted 29 W, Wall washer Spotlight, suitable for 3 circuit DALI adapter for control with including, No 36 25,706.06

mangement with Led 2560 lm, colour Temperature 3000K, colour rendering index : CRI> 80 (50,000h) ,Symmetric distribution, Dimming range 100-0.5 %, Beam

Angle: 50⁰. The fixture Length min:295mm, width: min 86 mm, rotatable 360⁰, 90⁰ tiltable, weight:1.55kg approx, Protection rating: IP20, Protection class I, with 5 years

warranty of fixture. This should be suitable on 3-phase track with LED light source. 220-240V, 50-60Hz power supply integrated. In the “All white” versions, the track

adapter, the arm, the rear of the head and the head are white. Only the antiglare ring is black. Equivalent Model no- 09.7770.30AYU of Flos.

4 Supply, Installation, Testing and Commisioning of Track mounted 26 W, Medium optic spotlight for 3 circuit DALI adapter for Control with including, management No 21 62,004.42

with LED COB 3000 lm, colour temperature: 3000K, colour rendering index: CRI >90 L90 / B10 (50,000h) SDCM < 2, Symmetric medium light distribution, Dimming

range 100-0.5 % , Beam Angle: 29⁰, length: 221 mm, width: 84 mm, height: 238 mm rotatable 360°, 90° tiltable, weight: 1.5kg, protection rating: IP20, protection class

I, maximum ambient temperature: 45 ° C. Certificates: manufactured according to DIN VDE 0711 / EN 60598, CE colour: white (RAL9016) with fixture warranty 5

years. The fixture should be suitable for interchangible filter with help of extended ring to vary the focus and colour temp. according to use.

Equivalent Model No- 112 37 103 910 D of of Hoffmeister

5 Supply, Installation, Testing and Commisioning of Track mounted 13 W, Narrow optic Spotlight for 3 circuit DALI adapter for control with including ,management No 36 62,004.42

with LED COB 1300 lm, colour temperature: 3000K, colour rendering index: CRI 95 L90 / B10 (50,000h) SDCM < 2, Symmetric narrow light distribution, Dimming

range 100-0.5 % , Beam Angle: 7⁰, housing of die cast aluminium adapter of fibreglass reinforced thermoplastic, length: 221 mm, width: 84 mm, height: 238 mm,

rotatable 360°, 90° tiltable, weight: 1.5 kg, protection rating: IP20, protection class I. The fixture warranty should be 5 years. Maximum ambient temperature: 45 ° C,

certificates: manufactured according to DIN VDE 0711 / EN 60598, CE, colour: white (RAL9016). Equivalent Model no-112 37 303 910 D of of Hoffmeister

6 Supply, Installation, Testing and Commisioning of Track mounted 26 W, Flood optic spotlight for 3 circuit DALI adapter for Control with including, management with No 16 62,004.42

LED COB 3000 lm, colour temperature: 3000K, colour rendering index: CRI >90, L90 / B10 (50,000h), SDCM < 2, Symmetric flood light distribution, Dimming range

100-0.5 % , Beam Angle: 40⁰, housing of die cast aluminium adapter of fibreglass reinforced thermoplastic length: 221 mm, width: 84 mm, height: 238 mm rotatable

360°, 90° tiltable, weight: 1.5 kg, protection rating: IP20, protection class I, with 5 years Warranty of fixture, maximum ambient temperature: 45 ° C, certificates:

manufactured according to DIN VDE 0711 / EN 60598, CE, colour: white (RAL9016). The fixture should be suitable for interchangible filter with help of extended ring

to vary the focus and colour temp. according to use. Equivalent Model No- 112 37 203 910 D of Hoffmeister

7 Supply, Installation, Testing and Commisioning of Connection ring suitable for attachment of accessories as mentioned below lenses/filters etc for all above No 25 5,634.20

mentioned spotlights, Quantity may increase as per site requirement or as per applications. The fixture should be suitable for interchangible filter with help of

extended ring to vary the focus and colour temp. according to use.Equivalent Model no- 105760910 of Hoffmeister

8 Supply, Installation, Testing and Commisioning of Tarck mounted accessories,suitable for above mentioned track spot wherever applicable , Quantity may increase No 25 11,690.97

as per site requirement or as per applications . The assesories may be any one of the following type.

1. Soft.shape lens- Soothing illumination .

2. Soft.spot lens- Soooting focus illumination.

3. Sculpture lens- Focusable/Pick-up of Art piece or Painting

4. Prismatic glass- Abmient Lighting

5. Dichroitic conversion filter- Warm tone filter, conversion froom 3000K to 2400K,

6. Dichroitic conversion filter- Neutral filter, conversion from 3000K to 4000K.

7. Dichroitic conversion filter- Neutral filter, conversion from 3000K to 5000K

8. UV filter glass -UV/IR filter glass.

9. Safety glass, clear

Digitally signed by

2. Automation BOQ

1 Supply,Installation, testing and commissioning of HomeWorksR QS processor provides control and communication to HomeWorksR QS system components. The No 1 82,951.44

Ethernet link allows communication to the HomeWorksR QS software, integration with third-party systems and communication between multiple processors.

HomeWorksR QS processors may be connected using either standard networking or using ad-hoc networking. Rates will be inclusive of complete

automation/integeration of below mentioned items in all respect as per the clients requirement. The integerator will provide necessary tarining for operation to client in

satisfactory condition.

2 Supply,Installation, testing and commissioning of QSPS-DH-1-75 QS link power supply provides up to 75 Power Draw Units (PDUs) on a QS link. The QSPS-DH-1- No 1 39,394.82

75 powers additional compatible accessories and devices, allowing them to be added to a QS system. Equivalent Model no- QSPS-DH-1-75 of Lutron

3 Supply,Installation, testing and commissioning of The DALI® Power Module is a DIN-rail mounted controller for DALI®-compliant digital addressable loads, referred to No 2 107,723.63

as control gear. It provides DALI® bus power and control for two independent DALI® buses with up to 64 DALI-compliant digital addressable loads each.

equivalent Model no- LQSE-DALI-2 of Lutron

4 Supply,Installation, testing and commissioning of Connect Bridge creates a link between a RadioRA 2 or HomeWorks QS system and the Lutron cloud, enabling No 1 40,000.50

remote access to your system.

5 Supply,Installation, testing and commissioning of The International seeTouch keypad provides elegant, intuitive lights and blind control. Like other fixtures and fittings No 4 54,465.61

in your home, lighting and blind controls play an important part in the design of any room.Seetouch Keypad-8/10 Buttons (Predefined engraving).

6 Supply,Installation, testing and commissioning of 4-Tier Din-rail Enclosure. No 2 21,832.54

7 Supply,Installation, testing and commissioning of wireless ipad as control touchpad.10.2-inch (diagonal) LED-backlit Multi-Touch display with IPS technology, No 1 92,964.41

2160x1620-pixel resolution at 264 pixels per inch (ppi), 500 nits brightness, Fingerprint-resistant oleophobic coating. Memory 32Gb and 128 GB along with others

best features available with lattest iOS.

3. IP CCTV System

1 Dome Camera: Supply, installation, testing and commissioning of IP based 5 MP Dome camera, ONVIF Profile S&G Compliant, UL,CE,FCC, RoHS certified, 1/2.7" No. 25 24,923.80

CMOS sensor with 2.8-12 mm Motorized Varifocal Lens . The camera should have inbuilt features of Triple Stream having frame rate @ 30fps with Edge Based

Analytics : line crossing ,perimeter intrusion ,Face detection , cross counting , stationary object etc. It should have inbuilt IR LED with having IR distance upto 30mtrs,

auto iris True Day/Night with IR Cut Filter , WDR 120DB , supported video formate H.265/H.264/MJPEG Compression, PoE, IP66 , Vandal Proof IK10 etc. as per

technical specifications

2 Bullet Camera: Supply, installation, testing and commissioning of IP based 5 MP Bullet camera, ONVIF Profile S&G Compliant, UL,CE,FCC, RoHS certified, 1/2.7" No. 5 68,490.79

CMOS sensor with 2.8-12 mm Motorized Varifocal Lens. The camera should have inbuilt features of Triple Stream with Edge Based Analytics line crossing ,perimeter

intrusion ,Face detection , cross counting , stationary object etc. It should have inbuilt IR LED with having IR distance upto 50 mtrs, auto iris True Day/Night with IR

Cut Filter , WDR 120DB , supported video formate H.265/H.264/MJPEG Compression, PoE, IP66 , Vandal Proof IK10 etc. as per technical specifications

3 PTZ Camera: Supply, installation, testing and commissioning of IP based 4 MP PTZ camera, ONVIF Compliant, UL,CE,FCC, RoHS certified, 1/3" CMOS sensor with No. 2 164,739.96

4.5-135 mm focal motorized lens having 30x optical zooma nd 16x Digital zoom. The camera should have inbuilt features of Triple Stream with Edge Based Analytics

line crossing ,perimeter intrusion ,Face detection , cross counting , stationary object etc having primary stream with 4MP @30fps and min 1.3MP @60fps. It should

have inbuilt IR LED with having IR distance upto 100 mtrs, auto iris True Day/Night with IR Cut Filter , WDR 120DB , supported video formate H.265/H.264/MJPEG

Compression, PoE, IP66 , Vandal Proof IK10 etc. as per technical specifications

3.1 Supply, Installation, Testing & Commissioning of USB / Networked PTZ Keyboard. No. 1 99,920.78

4 Supply , Installation , Testing and commissioning of following items as required.

4.4 Supply , Installation , Testing and commissioning of following items as required CAT 6 A UTP (unshielded twisted pair) cable 23 AWG solid copper conductors. Mtr. 2880 88.74

Digitally signed by

4.5 Supply, Installation, Testing & Commissioning of CAT6 A patch cord of 1 mtr for for rack side switch to jack panel connectivity. No. 32 467.64

5 Supply , Installation , Testing and commissioning of loaded 8 port CAT6 A jack panel for CAT6 A cable termination. No. 5 7,501.07

6 Supply, Installation, Testing & Commissioning of Access Switch 8 port 10/100/1000BASE-T PoE-plus No. 5 30,189.35

7 Supply, Installation, Testing & Commissioning of Access Switch 16 port 10/100/1000BASE-T PoE-plus No. 1 67,176.62

8 SITC of 12U, 600X500 19" wall mount rack with PDU & Mounting Hardware (For 5 Floors and Server Room) No. 6 10,888.37

9 Supply, installation, testing and commissioning of Hardware based 32 Channel Network Video Recorder, H.265 Recording and Playback , Embedded Linux OS, Pre- No. 1 241,062.95

Installed VMS with licenses, Quad-core embedded or better Processor , 4GB, DDR3 RAM , Intel HD Graphics , Throughput Input: 320Mbps / Output: 320Mbps,frame

rate 30fps at connected cameras resolution, inclusive of minimum hard drive storage of 8 TB or more plus e-SATA Port for External Storage Device , , COM Port RS-

232 x1 , USB 3.0 x 2 + USB 2.0 x 2 , 1 x LAN (10/100/1000 BaseT), 16 no PoE ports etc. as per technical specifications

10 Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display Panel All including HDMI cable for display output. No. 2 65,145.49

11 Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i5-Processor (min. 4MB Cache, up to 3.0 GHz); Memory: 8GB, DDR3 No. 2 107,313.98

1600MHz SDRAM Memory;Hard disk: 1TB, Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; 21" TFT Monitor with

Full HD (1920x1080 @60hz) ; Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; , 7200 RPM 3.5" SATA 6Gb/s

Hard Drive; Operating system: Windows 10 or lattest 64 Bit.

4. Door Acess control

Note: For Workstation PC and cat cable it has been considered in CCTV boq

Digitally signed by

IP Based Door Acess control:

1 Supplying, Installation, testing & Commissioning of IP Based Fingerprint, Smart Card reader with in built controller. Nos 6 48,052.16

1. Reader should support multi mode authentication like Fingerprint, Smart Card etc. It has large backlit LCD, with 4 function keys.

2. Device should support the Template on card feature by reading the fingerprint stored on card & comparing the fingerprint template presented to it. The reader

should sense the identity card when brought to the proximity of at least 4 cm and should be able to transfer the finger print patterns of the card holder to the card

reader memory and match these patterns when the finger is put on the sensor.

3. Fingerprint Reader should not be able to detect the Fake Fingerprints when placed on the sensor. It should accept only live fingerprint & should not read the fake

fingerprints made of any chemical composition such as Rubber, Silicon, Gel, Paper, Thin film etc.

4. Reader should have 500 DPI Optical Sensor. OEM should have in house Research & Development capabilities of customization in fingerprint algorithms,

encryptions etc.

5. The Biometric terminal, Optical Fingerprint Sensor, Core Fingerprint Algorithm, & Access Control Software should be of same manufacturer. All relevant certificates

should be submitted.

6. Fingerprint Reader shall be manufactured using the latest and most accurate state of the art technologies like reading Fake Fingerprint Detection, Auto Push,

Server Authentication and shall support high speed processing.

7. Fingerprint Reader should be able to download punch information of employees from the readers in real‐time. There should be no batch process required.

8. Biometric Reader should have inbuilt Door Controller feature and proposed Reader should also provide the wiegand

9. Device Memory should be min 128MB or better

10. Device should be able to store up to 1500 Users / Fingerprints in 1:N mode and 10000 Fingerprints in 1:1 Mode on terminal itself & shall not be dependent on

any server for storage of fingerprints. Software shall be able to register all 10 fingerprints of an employee in software & up to 5 fingers in terminal itself. Fingerprint

storage capacity shall not be divided between terminal & server.

11. Fingerprint Reader should be able to store min 100,000 transaction logs.

12. Fingerprint Reader should have min 32 bit ARM9 CPU processor or better for fast processing.

13. Fingerprint Readers must support Duress Fingerprint option. In case of emergency, system should send Duress finger event to Server.

14. Fingerprint Sensor should be Min. 13 mm x 13 mm or better

15. Should support ISO International Standard 19794-2.

16. Devices should support Blacklist Employee configuration. It should send an alert to software if a blacklist employees punches.

17. The access permission should be less than 1 second for up to 1000 users for 1:N & enrollment process shall not take more than 10 seconds per user.

18. Reader should be able to read either finger print or smart card or both.

As per attached technical specification.

2 Supply, Installation, testing and Commissioning of Card & Password IP based Reader cum Controller Nos 6 42,339.07

1. Reader should support multi mode authentication like Smart Card Reader & Password with capacitive Keypad / Touch Screen for providing multi factor

authentication by reading the Cards, Passwords, Mobile Key & various combinations.

2. Reader shall be manufactured using the latest and most accurate state of the art technologies / features like Face Detection, VOIP support, On board Camera,

Bluetooth, Auto Push, Server Authentication etc. and shall support high speed processing.

3. The solution should be able to download punch information of employees from the readers in real‐time. There should be no batch process required.

4. Readers should support the various authentication modes like Terminal only / Server only / Terminal/Server or Server/Terminal Authentication.

5. Reader Memory should be min 8GB Flash and 256 MB RAM

6. System should be able to store up to 1,00,000 cards on terminal itself & shall not be dependent on any server for storage of cards & hence card storage capacity

shall not be divided between terminal & server.

7. System should be able to store up to 10,00,000 transaction logs along with min 30,000 picture logs.

8. Reader should have min 1 GHz Quad Core processor or better for fast processing.

9. Readers should have Bluetooth module to support a card less / password less entry as an option. Administrator should be able to send a temporarily mobile key for

any user / visitor to access the door. Usage of temporarily key shall be configurable as per requirement.

10. Reader should support VOIP (Voice over IP) feature.

11. The access permission should be less than 1 second & enrollment process shall not take more than 10 seconds per user.

12. Reader should support Face detection feature for added security during the verification process. Requires a facial picture before authorization.

13. Display should have min 4” Color Touch LCD and shall be capturing & displaying USER’s image on main window during authentication. It should have

programmable LCD screen saver. Systems with changeable custom background to put company logo shall be preferable.

14. Reader should communicate with central server using TCP/IP protocol over Ethernet or Internet, 10/100 Mbps auto sensing Ethernet with DHCP, SSL, IPv4,

GPRS (Optional).

15. Card reader shall be capable of reading the selected card technologies (Mifare with 13.56 MHz range). The protocol of data from the reader shall be an open

format and non‐proprietary.

16. Reader should have USB feature also. With USB memory stick and OTG cable, data can be exported / imported and upgrade the firmware easily

17. It shall be capable to provide a unique tone and / or tonal sequence for various status conditions such as access granted / denied; reader power condition.

As per attached technical specification.

Digitally signed by

3 Supplying, Installation, testing & Commissioning of Access Control System Software, Software should be based on Server – Client architecture, supporting up to 20 Nos 1 1,408.55

clients in MS Access database & unlimited clients in SQL Server database.Photo pop up to check employee in software even if Software is minimized & should

display two images in pop up – stored image in database along with Live captured image. As user authenticates, status can be monitored on line on real time

basis.System connectivity status can be monitored on line for all machines connected with software. Upload / Download of users from one machine to another from

standard software only, for all / selected users.Real time monitoring of punches for all machines / users connected with software.Software should display invalid

punches / unsuccessful entries also.Software should display live captured images on screen.Should support Anti Pass back feature. Should support Time Zone

Features. Should support Access Duration for employees.

Should support E-mail notification feature in case of following events:

➢ Terminal disconnected

➢ Terminal tampered

➢ Emergency state

➢ External sensor

➢ Blacklist User attempt authentication

➢ Matching fail

➢ Tail gate alarm

Should support Alarm notification feature in case of following events:

➢ Terminal disconnected

➢ Terminal tampered

➢ Blacklist User attempt authentication

➢ Matching fail

➢ Tail gate alarm

4 Supplying installation testing and commissioning of contactless Smart Cards with an operating frequency of 13.56 MHz with read range of 8 to 10 cm, for Off roll Nos 500 510.81

Employees, Security Personnel,Visitors etc. The Card reading time should be less than 100 ms or better and made up ABS shell with PVC cover of glossy finish. The

card shoul be unaffected by body shielding or variable environmental condition even when close to keys and coins. It can fit into a wallet or purse and clip as a photo

id badge. The reader technology ensures high security with mutual authentication, encrypted data transfer, and 64-bit diversified keys for read/write capabilities. It

should meets ISO 15693 standard for contactless communications. Contactless card should have minimum operational warranty of 1 lac reads.

5 Supplying, installtion, testing and commissioning of electromagnetic door lock of holding force 600lbs with Low-profile design , Adjustable mounting bracket , Nos 12 4,727.94

operating Voltage 12 / 24 VDC on site selectable, Finish Natural anodized Aluminum , Fail safe - Releases instantly when power is discontinued , Silent Operation -

No annoying humming or buzzing noise , Reliability - No Mechanical moving part. Complete with Brackets ( Two locks to be provided in double leaf doors and one in

single leaf door as per site requirement).The lock supply to be integrated with FAS through the reader cum controller. 56735.31

6 Supplying installation testing and commissioning of Magnetic Door Contact for Door position feedback. Nos 12 1,308.54

7 Supplying installation testing and commissioning of "EXIT" Push Button Switch suitable for wall mount complete in all respect. Nos 12 1,711.39

8 Supply installation testing and comissioning of 2 core 1.5 sqmm copper cable in existing suitable PVC conduit Rmtr 400 84.51

5. Solar System

Digitally signed by

1 Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of kWp 20 61,670.60

Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with

following components complete as required:-

a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2.

Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output

peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.

b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC

Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the

voltage and frequency level to suit the Grid Voltage Frequency.

c) Data Monitoring System complete with accessories.

d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs

and other accessories etc. as required.

e) Lightning and surge voltage protection.

f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables

between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc.

6. PAINTING HANGING SYSTEM

1 Supply of Painting hanging system with spacial Hanger+ Supporting L plate of capacity to take the load of 50 -105 kg oil painting fixing with 2 set of special Hanger

+2 set suporting L plate + screw fixing as per direction of consultant , LKA authorities & engineer incharge. NO 10.00 56,863.89 568638.85

2 Supply of Painting hanging system with spacial Hanger+ Supporting L plate of capacity to take the load of 20 -50 kg oil painting fixing with 1 set of special Hanger

+screw fixing as per direction of consultant , LKA authorities & engineer incharge. NO 10.00 9,675.57 96755.69

3 Supply of Painting hanging system with spacial Hanger+ Supporting L plate of capacity to take the load of 0 -30 kg of water coloured miniature painting fixing with 1

set of security hook & screw fixing with spacer as per direction of consultant , LKA authorities & engineer incharge. NO 50.00 10,398.21 519910.39

Providing of signages, modular curved frame technology,of various widths and lengths, to form suggested usages,made of aluminium extruded sections , duly

1 anodised ,all signages shall be provided with 0.6-0.8mm polycarbonate protecting film over the prints, of appropriate size, print shall on 0.6mm

coated,YUPO,make,biogradable sheet printed on HP 4500 UV flat bed printer.

Entrance floor standing ( 300x1400 ) mm

Entrance wall mounted ( 300x300 )mm

reception/information/registration/may I help you/waiting lounge ( 1000x210 )mm

ceiling hung sign (both side display)

Way finding ceiling hung sign(both side) ( 1500x210 )mm

Wall projected(both side) ( 250x210 )mm

wall mounted signages for various type of indications

f toilet signs ( 120x80 ) mm

Digitally signed by

g information panel at Lift Lobby ( 300x80) mm

h Lift Lobby Info - Panel , wall mounted ( 150x150 ) mm

i Lift Lobby Info - Panel , two sided, floor standing ( 120x120 ) mm

Signages to indicate directory

Providing of aluminium frames with concealed fixing system, insertions made of 5 mm foam board and laminated digital prints framed into 25mmx20 mm extruded

4 aluminium tubular frame with necessary holding slots.

YOU ARE HERE Plans Floor wise ( 600X450) mm

Providing of 1.5mm,polished,304 grade,Stainless steel plate, duly etched and filled with prescribed enamel colors to form an elevator disclamer of size 250x250mm

ELEVATOR DISCLAIMER PLATE ( 800x1000) mm

Providing of edge lit ,emergency exit sign with 2 hrs power back up, concealed for false ceiling, and wall mounted over the door.( 600X450 ) mm

EXIT SIGN EDGE LIT (recess mounting)with 2hr backup

EXIT LIGHT WITH 2 HR BACKU(Exit at Stairs entry/ Deptt. Exit) ( 250x250 ) mm

Providing of internally illuminated signage made with aluminium profile with insertion of 3mm Cast acrylic duly cladded with electrocut casted 3M vinyl of required

Providing of Customised signage made of Stainess steel 304 grade / Acrylic Channel letters of various sizes and specifications( refer design sheets)illumination

c achieved by using LED of GE/ PHILLIPS or OSRAM. The letters shall be mounted on MS framing and ACP of external grade, as per approved drawings and

entrance gate signage, SS, PU PAINTED, non illuminated ( 600x400 ) mm

building name / SS, PU PAINTED, non illuminated

Providing of warning sign measuring 400x400 mm using extruded profiles and 4mm cast acrylic cladded with Retroreflective vinyl to its full surface and further lined

9 with Reflective Vinyl duly designed and cut to signage text. The sign posting is suspended by means of stainless steel suspenders, as per design. Signs are to restrict

, depicting pictogram of No smoking, No horn, and Make use dust bin.

Warning Signs on Columns / walls ( 1800x275 ) mm

Providing of floor marking to direct visitors to various destination, of 3M make of approved colors, vinyls to be scratch resistant , 100mm wide

Floor Direction strips

Providing of exterior totem signage, to be fixed with the help of MS framework, Signage to be made of MS pipe frame work, cladded with 3mm Aluminium composite

panel, duly cut by CNC router, and the letters to be laser cut,5mm casted clear acrylic,inserted in a cut out fitted on 3 mm 040 casted acrylic, the letters front to be

exterior grade vinyl, The signage shall illuminated with back lit T5 lamps , of PHILLIPS/OSRAM make , complete in all respects , size, 3000x800

Façade signage with building name ( 3000x800 ) mm

Digitally signed by