REPAIR MAINT OF OLD UNSV LT UG CALBES OF DIFFERENT CAPACITY ELECT HOT WATER APPARATUS GEYSERS REWINDING OF CEILING FANS EXHAUST FANS INTERNAL WIRING FITTING FIXTURES WITH ALL CONNECTED ACCESSORIES AND ALLIED WORKS AT RMS AND DIMAPUR

Amount

Excavation in trenches, not exceeding 1.5 m wide and n.exc 1.5 m in depth for foundation laying of cable, pipe etc and getting out in soft /loose soil etc complete all as specified and directed by Engr-in-Charge.

All as per Ser item No 1.00 (here-in-before) but exc 1.5m deep and n.exc 3 m deep.

Returning filling in including spreading, leveling,watering and well ramming in layers not exc 25 cm in soft /loose soil etc complete all as specified and directed by Engr-in-Charge.

Removing excavated material n.exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point etc complete all as specified and directed by Engr-in-Charge.

M&L for spreading fine river sand in trenches complete all as specified and as directed by Engr-in-Charge. Note: For measurement purpose, punned down thickness shall only be taken.

M&L for laying sub class 'B', old size burnt bricks for cable protection, of size 230mmx115mmx75mm complete all as specified and directed by Engr-in-Charge.

Dismantling steel poles/struts, any size etc complete all as specified and directed by Engr-in-Charge.

Dismantling cross -arms of MS channel or angle sections etc complete all as specified and directed by Engr-in-Charge.

Dismantling insulators any type, any size etc complete all as specified and directed by Engr-in-Charge.

Dismantling stay assembly complete (demolition of concrete, etc. and excavation measured separately), etc complete all as specified and directed by Engr-in-Charge.

Taking down carefully aluminium conductor of any size from LT OH Lines after unbinding from insulators for replacement of multijointed / undersize conductors or loose conductor etc complete all as specified and directed by Engr-in-Charge.

Supply, laying & testing XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor 1100 volts grade of size 10 Sqmm, 2 core incl taking out old unsv cable in trenches etc complete all as specified and directed by Engr-in-Charge.

All as per Ser item No 12 (here-in-before) but 16 Sqmm, 4 core

All as per Ser item No 12 (here-in-before) but 35 Sqmm, 3.5 core

All as per Ser item No 12 (here-in-before) but 50 Sqmm, 3.5 core

All as per Ser item No 12 (here-in-before) but 70 Sqmm, 3.5 core

All as per Ser item No 12 (here-in-before) but 95 Sqmm, 3.5 core

All as per Ser item No 12 (here-in-before) but 120 Sqmm, 3.5 core

All as per Ser item No 12 (here-in-before) but 240 Sqmm, 3.5 core

M & L for galvanised steel tubing 40 mm bore, light grade laid in trenches, road crossings pole/wall etc. for cable protection including providing MS flat iron 50mm x 6mm clamps (02 Nos) complete all as specified and directed including taking down the existing UNSV steel tubing etc complete all as specified and directed by Engr-in-Charge.

All as per Ser item No 20 (here-in-before) but 50mm dia.

All as per Ser item No 20 (here-in-before) but 80mm dia.

All as per Ser item No 20 (here-in-before) but 100mm dia.

M&L for steel tubular swaged poles, 9 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP 31, including painting with anti corrosive paint internally and externally up to planting depth, alternative Black & white strips of 30 cm width upto 1.5 mtr with synthetic enamal paint above ground level all as required at site or directed by Engr-in-charge.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from steel section including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of synthetic aluminium paint.

S&F in replacement of existing unserviceable anti climbing device spikes type fabricated out of MS bars (round ,spuare or flat ) including nuts, bolts washers and welding into two halves made to shape to suite the cross section of the pole including one coat of primer and one under coat and one finishing coat of aluminium paint including preparation of suraface complete all as specified and directed.

M&L for Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade complete all as specified.

M&L for shackle type insulators of 100mm high, 115mm dia porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts including mild steel straps of size 31x5mm including 14mm dia bolts complete all as specified.

M&L for stay assembly using GI stay rod 20mm dia complete with stay plate mild steel of size 300x300x6.00mm thick, stay bow, complete all as specified and shown in Electrical Plate No 1 . (Necessary excavation and PCC and one set of stay clamps at top of pole & loop insulator of size 90x140mm porcelain, vitreous, white, brown or green shall be measured and paid seperately)

S&F Galvanised stay wire of size 7/4mm all as specified and directed.

S&F loop type insulator porcelain vitirious of size 90 x 140 mm clearence of hole 25.5mm complete all as specified and directed.

M&L for ACSR of any size drawn straight horizontal on over head lines on poles including binding wire, binding with insulators, jointing jumpers etc including connections of incoming and out going cables complete all as specified and directed.

Restringing/restretching aluminium conductor or GI wire on existing over head lines including necessary binding with binding wire with insulators, connections of incoming and out going cables, binding with spacers where required, complete all as specified. (Note i. Replacement of conductor shall be measured and paid separately under respective item of BOQ. Total No of conductor in over head line to be taken down shall comprise of a minimum of one phase, one neutral and one continuous earth wire and for measurement length of each conductor shall be taken seperately etc complete all as specified and directed by Engr-in-Charge.

M&L for GI wire of 4mm dia galvanised iron wire drawn straight horizontal as continuous earth wire on poles/cradles inlc connections of incoming and out going cables complete all as specified and directed by Engr-in-Charge.

Trimming up of tree branches upto 3 mtr all around LT overhead lines, removing cut branches from site as directed, Note :- (i) The overhead lines will be kept clear from all trees by trimming of tree branches within 3 mtr all around the line. Necessary permission will be obtained from department by the contractor one week prior to trimming in particular area and shut down of that area will be arranged by department. (ii) Total length of line from supply point to load end will be measured for the purpose of payment, irrespective of the No of trees required to be trimed. (iii) Fortnightly inspection of lines will be made jointly by contractor or his authorised rep and rep of Engr-in-Charge and out come whether lines are free from tree branches or not & shall be kept on record. No payment will be made for whole length if even a single tree is within reach of OH line. (iv) The OH line will be maintained for whole period of contract and the payment will be made with final bill only. The payment for the period for which line is not maintained will be deducted proportionately based on fortnightly inspection carried out as detailed above. (vii) Quoted rates are deemed to include necessary T&P. One span comprises of distance between one pole to another including all trees in its vicinity including switch off/on, electric cable connection or disconnection etc complete all as specified and directed by Engr-in-Charge.

M&L for replacement of unserviceable MCCB including terminals, 160 Amp current carrying capacity 36 KA , AC 415 Volts, four pole including terminals, with microprocessor release setting complete including dismentling the existing with all connections & fixing the new with all connections all as directed by Engg-in-charge.

M&L for replacement of unserviceable MCCB 4 Pole including terminals, 415 V, adjustable type 200 Amps with breaking capacity 36 KA complete all as specified and directed. including dismentling the existing with all connections & fixing the new with all connections all as directed by Engg-in-charge.

M&L for replacement of unserviceable MCCB 250 Amp current carrying capacity 36 KA , AC 415 Volts, three pole including terminals, with microprocessor release setting complete including dismentling the existing with all connections & fixing the new with all connections all as directed by Engg-in-charge.

M&L for replacement of unserviceable MCCB 160 Amps current carrying capacity 36 KA , AC 415 Volts three pole including terminals, with microprocessor release setting complete including dismentling the existing with all connections & fixing the new with all connections all as directed by Engg-in-charge.

M&L for replacement of unserviceable MCCB 3 Pole , 415 V, Adjustable type 250 Amps with breaking capacity 36 KA including terminals, complete including dismentling the existing with all connections & fixing the new with all connections all as directed by Engg-in-charge.

M&L for replacement of unserviceable MCCB 4 Pole , 415 V, fixed type 125 Amps with breaking capacity 16 KA including terminals, complete including dismentling the existing with all connections & fixing the new with all connections all as directed by Engg-in-charge.

M&L for replacement of unserviceable MCCB 4 Pole , 415 V, fixed type 25 to 100 Amps with breaking capacity 16 KA including terminals, complete including dismentling the existing with all connections & fixing the new with all connections all as directed by Engg-in-charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm, 2 core all as specified and as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sqmm, 2 core all as specified and as directed.

M&L for earthing with steel earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate,40mm dia GI tubing light grade protection pipe upto test point, 20mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30X30cm made of RCC 1:3:6 with suitable handle,angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as specified in plate No 3 of SSR Part-I and directed by Engr-In-Charge.

M&L for replacement of heat shrinkable end termination cable jointing kit for PVC/XLPE insulated ,armoured electric cable of size upto 16 sqmm, 4 core 1100 Volts garde for indoor/outdoor use complete with jointing materials and accessories.

M&L for replacement of heat shrinkable end termination cable jointing kit for PVC/XLPE insulated ,armoured electric cable of size 25 to 50 Sqmm, 3.5 core 1100 Volts garde for indoor/outdoor use complete with jointing materials and accessories.

All as per Ser item No 47 (here-in-before) but electric cable of size 70 sqmm to 150 Sqmm, 3.5 core

All as per Ser item No 47 (here-in-before) but electric cable of size 185 sqmm to 300 Sqmm, 3.5 core

All as per Ser item No 47 (here-in-before) but electric cable of size 400 sqmm to 630 Sqmm, 3.5 core

M& L for replacement of cable lugs with aluminium alloy tubular bimetallic terminals suitable for cable of size 10 Sqmm incl crimping with help of crimping tools all as specified and directed . Make :- Dowells/Jainsons or of equivalent make as approved by GE

All as per Ser item No 51 (here-in-before) but size of cable 16Sqmm

All as per Ser item No 51 (here-in-before) but size of cable 25sqmm

All as per Ser item No 51 (here-in-before) but size of cable 35Sqmm

All as per Ser item No 51 (here-in-before) but size of cable 50 Sqmm

All as per Ser item No 51 (here-in-before) but size of cable 70 Sqmm

All as per Ser item No 51 (here-in-before) but size of cable 95 Sqmm

All as per Ser item No 51 (here-in-before) but size of cable 120 Sqmm

All as per Ser item No 51 (here-in-before) but size of cable 185 sqmm

All as per Ser item No 51 (here-in-before) but size of cable 240 Sqmm

All as per Ser item No 51 (here-in-before) but size of cable 300 Sqmm

All as per Ser item No 51 (here-in-before) but size of cable 400 sqmm

All as per Ser item No 51 (here-in-before) but size of cable 630 sqmm

M&L for aluminium strip of any size cut to length as required at site including drilling holes, bend to shape for repairing of LT panels compete all as specified or directed by Engr-in-Charge.

M&L for copper strip of any size cut to length as required at site including drilling holes, bend to shape for repairing of LT panels compete all as specified or directed by Engr-in-Charge.

M&L for galvanisied MS nut, bolts & washers compete all as specified or directed by Engr-in-Charge.

M&L for brass nut, bolts & washers compete all as specified or directed by Engr-in-Charge.

M&L for cement concrete (1:4:8) type D2 ( using 40mm graded stone aggregate) as in foundation of pole / stay including form work etc. compete all as specified or directed by Engr-in-Charge.

M&L for cement concrete (1:3:6) type C1 ( using 20mm graded stone aggregate ) as in coping of poles studs including form work etc complete all as specified

M&L for scraping of old paint from the steel tublar poles 9 mtr high without removing accessories and preparation of surfaces for repainting. Repainting the pole with one coat of alternate black and white strips of 30 cm wide upto height of 1.5 mtr using synthetic enamel. Marking the pole number with black synthetic enamel paint. Repainting the remaining surface of poles and painting of iron parts of steel cross arms i.e 'U' clamps etc above 1.5 Mtr height by applying two coats of aluminium paint all as required at site complete all as specified and directed by Engr-in-Charge.

Supply, install in repair, test and commission out door type bus bar chamber having tapered roof outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in platform, 90 cm above and 45 cm below the ground level, frame factory fabricated with front openable door system , 04 Nos Al bus bar 400 amps cap fixed over epoxy insulators duly insulated with different sleeves and neccessary holes of suitable dia in Bus bar strip with locking arrangements “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase, 4 wire, 415 Volt, 50 Hz, tested at factory approved from CPRI having thickness of powder coat not less than 100 microns provided with suitable gasket to make it dust/vermin proof including taking out old unserviceable bus bar boxes complete all as specified and directed by Engr-in-Charge.

M & L for repair/maint of LT panel board by dismantling all cable connection i.e incoming and outgoings and trenching out cable / cable loop after digging, cutting burnt portion of cable, cleaning and fixing of lugs with crimping tool, cleaning of bus bar with emery paper, tightening of bus bar with busbar insulators, re-fixing of cable with busbars/circuit breaker, by providing new bolts, nuts and washers cable lugs to be provided for all incoming and outgoing cables all as specified and as directed.

Supply & fixing in replacement Automatic Street Light Control Switch suitable for Three Phase with Infrared Sensor based NATURE SWITCH & Voltage Monitoring System (VMS). Nature Switch operation shall be based on Natural Light Lux level. Required Luminance Level for Switching ON is ≤ 30/60 Lux and for switching OFF ≥ 10 Lux. The Sensor shall also have part night operation facility of min. 4 to max. 12 hrs. VMS shall have Adjustable Over & Under Voltage Trip level and Protection against Phase Loss, Neutral Loss & Phase Reverse. The Sensor & VMS along with suitable Power Contactor(s) and Incoming-Outgoing MCBs shall be enclosed in a pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Termite proof and FR grade SMC Junction box conforming to IP54. The circuit shall also have provision for Manual Operation (i.e. By-Pass Option for both Sensor and VMS) etc complete all as specified and directed. Make of Materials:- Infrared Sensor based NATURE SWITCH : Bajaj / Healer or equivalent as approved by GE. Voltage montoring system : L&T / Havells or equivalent as approved by GE Junction box : Hensel / Sintex/ Bajaj

Supply & fixing in replacement Automatic Street Light Control Switch suitable for Single Phase with Infrared Sensor based NATURE SWITCH & Voltage Monitoring System (VMS). Nature Switch operation shall be based on Natural Light Lux level. Required Illuminance Level for Switching ON is ≤ 30/60 Lux and for switching OFF ≥ 10 Lux. The Sensor shall also have part night operation facility of min. 4 to max. 12 hrs. VMS shall have Adjustable Over & Under Voltage Trip level and Protection against Phase Loss, Neutral Loss & Phase Reverse. The Sensor & VMS along with suitable Power Contactor(s) and Incoming-Outgoing MCBs shall be enclosed in a pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Termite proof and FR grade SMC Junction box conforming to IP54. The circuit shall also have provision for Manual Operation (i.e. By-Pass Option for both Sensor Make of Materials:- Infrared Sensor based NATURE SWITCH : Bajaj / Healer or quivalent make as approved by GE. Voltage montoring system : L&T / Havells or quivalent make as approved by GE Junction box : Hensel / Sintex / Bajaj

S&F replacement of existing unserviceable Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and directed by Engr-in-Charge.

Supply and fix alumn conductor screened with extruded semi conducting compound XLPE insulated of size 70 sqmm cut to size all as required for jumpers complete all as specified and as directed by Engr in Charge.

Supply and fixing in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with suitable size bracket incl nuts, bolts, washers etc corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. including taking down old unsv light fittings all as per specified and as directed.

S & F in replacement PVC street light junction boxes of size 380mmx225mmx140mm with front openable shutter and locking arrangement with one 6 Amps MCB, mounted on dwin rail, connectors including fixing to pole with MS flat iron clamp 25mm x 3mm size with nuts and bolts washers, etc. complete including taking down unserviceable one all as specified and directed. Make : Sintex/Havells/Bajaj

S&F spacer 2 way PVC flat/clamp/twisted type LT with nuts, bolts of suitable size for fixing with existing conductor complete including taking down old UNSV spacer for the following:-

All as per Ser item No 79 (here-in-before) but 3 way

All as per Ser item No 79 (here-in-before) but 4 way

Taking down Ceiling fan/Exhaust fan, sealing cable end, dismantling blades and removing fan and blades to store after repair Hanging ceiling fan/Exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed by Engr-in-Charge.

M&L for painting of ceiling fans complete, in situ with one coat of synthetic enamel paint by spraying including filling cavities with filler & preparation of surface etc complete all as directed by Engr-in-Charge

M&L for dismantling and taking out burnt copper winding from ceiling fan of sweep 1200/1400mm any make, model, type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of ceiling fans work in RMS/Dimapur area with suitable winding machine and connected acessories. Spare parts shall be measured and paid separately under respective item of BOQ.

Supply & Fixing in replacement 1200mm BLDC 5 star ceiling fan with regulator enable motor power * input 27 watt with 10% tolerance * , motor insulation B type , 230-240V 50Hz AC supply 350 rpm , * 225 CMM air delivery* , service value *minimum 7.4 * with complete set 3 blade , canopy, down rod , Shackle remaining all accessories including nut & bolt washer as required & directed . Note : The contractor shall deposit old ceiling fan in AGE E/M store.

Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed. Note for item No 86 & 87 : The contractor shall deposit old exhaust fan in AGE E/M store.

All as per Ser item No 86 (here-in-before) but of size 450 mm sweep heavy duty

Taking down and Supply and fixing PVC Exhaust fan PVC 150 mm sweep single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified and directed by Engr-in-Charge. Note for item Nos 88 & 90 : The contractor shall deposit old ceiling fan AGE E/M store.

All as per ser item No 88.00 (here-in-before) but 200 mm sweep

All as per ser item No 88.00 (here-in-before) but 250 mm sweep

S&F in repair Fan capacitor of capacity 2.5 MFD etc complete all as specified and directed by Engr-in-Charge (Make: Universal/Usha/Bajaj)

S&F in repair Fan capacitor of capacity 4.0 MFD (Oil filled) etc complete all as specified and directed by Engr-in-Charge Make Universal/ Usha/Bajaj.

S&F in repair Ball bearing/Bush bearing suitable for ceiling fan, of any sweep etc complete all as specified and directed by Engr-in-Charge. Make of bearing-TATA/NBC/SKF (6201 to 6204)

S&F in repair Fan clamp MS including nut, bolt, rubber reel, split pin complete of suitable size 1200/1400 mm etc complete all as specified and directed by Engr-in-Charge

S&F in repair Top/bottom canopy suitable for ceiling fan of any sweep, make, model and type. Set of two etc complete all as specified and directed by Engr-in-Charge

S&F in repair Down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long etc complete all as specified and directed by Engr-in-Charge

S&F in repair Ceiling fan 1200/1400mm sweep Upper Cabinet motor Cover etc complete all as specified and directed by Engr-in-Charge.

S&F in repair Ceiling fan 1200/1400mm sweep lower Cabinet motor Cover etc complete all as specified and directed by Engr-in-Charge.

S&F in repair Ceiling fan set of 3 blade 1200/1400mm sweep etc complete all as specified and directed by Engr-in-Charge.

Supply, Fixing in replacement and testing of vertical type wall mounted storage water heater of Capacity 25Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technology * for inner tank with *incoloy heating element * with minimum * 4 years warranty , ABS outer body , 2 units of PVC connector pipe with length of 450mm length for hot and cold water supply with complete Accessories, 15 Amp plug top etc complete all as specified and directed by Engr-in-Charge

Dismantling of storage type water heater (Geyser) of 25/35/50 ltrs capacity, any make, vertical or horizontal type, mounted on wall by disconnecting electric and water supply connection and keeping the same in safe custody for carrying out necessary repair/replacement of UNSV parts/components including descaling of the geyser tank by using proper liquid chemical and re-assambling & refixing the same all as directed by the Engr-in-Charge. (Note: UNSV items for renewal shall be measured and paid seprately under respective itme here-in- after as supply & fixing).

Supply & fixing following items for water heater and geyser of any type model and make complete all as specified and directed by Engr-in-Charge.

S&F Heavy duty PK Aqua 2 feet hot water connection for geyser hose pipe both cold/hot of set water line with adopter and washer at both ends of the pipe etc complete all as specified and directed by Engr-in-Charge.

S&F Indicator lamp round/rectangular complete all as specified and directed by Engr-in-Charge.

S&F Thermostat for geyser 30 to 75 degree centigrade.Make: Thecha/DasPass/Victor

S&F Auto cut-off electric water heater geyser temperature controlling sensor any capacity complete all as specified and as directed.

S&F Push type copper heating element of 1.5 KW capacity complete all as specified and as directed..

S&F Glass wool in between outer cell and containercomplete all as specified and as directed.

S&F Storage tank and including assemble with rubber, nuts, washers etc for geyser of capacity 25/50 ltr, any make any type complete all as specified and as directed.

S&F 15 Amp plug Top suitable for 15 amp socket complete all as specified and as directed.

S&F 2.5 Sqmm wire 3 Core for connection geyser complete all as specified and as directed.

S&F Geyser 25Ltrs capacity outer cover suitable size of any make complete all as specified and as directed.

S & F of metal fasteners of 12mm dia x100mm long for fixing geyser complete as specified and as directed. Make : Anchor or equivalent as approved by GE.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.

M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping/PVC Conduit pipe medium grade including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.

All as per ser item No 105.00 (here-in-before) but One light point controlled by one, one way switch.

All as per ser item No 105.00 (here-in-before) but One Ceiling fan/ Exhaust fan point controlled by one, one way switch.

All as per ser item No 105.00 (here-in-before) but One 3 pin socket outlet 5 Amps on the same board with other switches.

All as per ser item No 105.00 (here-in-before) but One 3 pin socket outlet 5 Amps on the switch socket combination.

All as per ser item No 105.00 (here-in-before) but One bell point controlled by one, one way switch .

All as per ser item No 105 (here-in-before) but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.

M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed.

M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and directed by Engr-in-Charge.

M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and directed by Engr-in-Charge.

M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and directed by Engr-in-Charge.

M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and directed by Engr-in-Charge.

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock etc complete all as specified and directed by Engr-in-Charge.

M&L for replacement of Bell AC 230 volts musical type etc complete all as specified and directed by Engr-in-Charge.

M&L for bell push switch 5 amps piano type flush type etc complete all as specified and directed by Engr-in-Charge

M&L for 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting etc complete all as specified and directed by Engr-in-Charge.

All as per ser item No 115.00 (here-in-before) but LED tube light fitting 10 Watt etc complete all as specified and directed by Engr-in-Charge

M&L for 20W LED 4"tube Rod for Crystal glass LED tube light Double side connection suitable batten light fitting etc complete all as specified and directed by Engr-in-Charge

M&L for 20W LED 4"tube Rod for Single side connection suitable batten light fitting etc complete all as specified and directed by Engr-in-Charge.

M&L for Regal batten general purpose industrial compact batten suitable for single or twin LED tubelight 4ft long including electric connections complete all as specified and as directed by Engr-in-Charge.

M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair piano switch single pole 5A, one way etc complete all as specified and directed by Engr-in-Charge.

M&L in repair switch socket combination 2 in 1, 3 pin 5 A Flush etc complete all as specified and directed by Engr-in-Charge.

M&L in repair switch socket combination 2 in 1, 3 pin 5 A/16A Flush etc complete all as specified and directed by Engr-in-Charge.

Supply and fixingin in repair socket outlet 5 pin 6A, 230 volt flush type etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair fan regulator 100/120 watt step type AC 220 volt etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing for PVC switch board 10"x12" suitable for switch socket complete all as specified and directed. Make : ABB/ Presto Plast/Anchor

Supply and fixing for PVC switch board 8"x10" suitable for switch socket complete all as specified and directed Make : ABB/ Presto Plast/ Anchor

All as per ser item No 127.00 (here-in-before) but PVC switch board of size 8" x 6"

All as per ser item No 127.00 (here-in-before) but PVC switch board of size 7"x4"

All as per ser item No 127.00 (here-in-before) but PVC switch board of size 4" x 4"

M&L in replacement of PVC casting & caping 20/25 mm complete all specified and as directed by Engr-in-Charge.

All as per ser item No 131.00 (here-in-before) but in 25/32 mm.

M&L for replacement of PVC conduit 20mm (One length equals to 3 M) complete all as specified and as directed.

All as per ser item No 133.00 (here-in-before) but PVC conduit 25mm

M&L in repair sub main wiring Casing caping two run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including casing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length.

M&L in repair sub main wiring Casing caping two run 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including casing caping complete all as specified and as directed. NOTE:- Two runs of 6.0 Sq mm +one run of 6.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length.

M&L for VTPN DPX 4 way,double door 415 Volts, 50 Hz, IP 43 IK 09 sheet steel, powder painted, with 02 neutral link & 02 earth bar and cable ties for cable management suitable for fixing of MCCB as incomer and MCB SP/TP as outgoing MCB DBs incl taking down of old UNSV DBs complete all as specified and as directed. Make : Legrand/Havells/Siemens

M&L for MCCB including terminals, 4 Pole, 415 V, adjustable type, 160 Amps with breaking capacity 36 KA taking down old unsv MCB complete all as specified and as directed.

M&L for MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.

M&L for MCB TPN 40 to 100 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

M&L in repair MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

All as per ser item No 141.00 (here-in-before) but SPN 4 Way

All as per ser item No 141.00 (here-in-before) but SPN 2 Way

M&L in Replacement of MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and as directed.

M&L in repair MCB SPN 40 to 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

M&L in repair MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

Taking down carefully any type light fittings complete, including fitting & fixtures such as tubelight fittings, decorative lights, ceiling lights, bldg security lights fittings etc, removing material from site and making good to the distrubed surfaces of walls, ceiling, floors etc including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge.

S&F decorative globe light 8' dia made up of high grade unbrekable polycarbonate material suitable for retrofit LED lamp B22 including base holder bracket, MS pipe 40mm dia 1.5 mtrs long complete with 9 Watt LED Bulb and all accessories complete all as specified and as directed.

M&L for flexible copper wire 23/76 wire complete all as per specified and directed.

Rameshwar Prasad

M/S SHANTI UDYOG

commercial enterprises

M/S Lucky Builders

M/S VIKASH TRADERS