Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹43.6 L+₹89,374 (2.09%)Rejected-Finance KRISHNA SOCIETY OPP TODI XRAY AND DIAG CENTRE MAKUM ROAD TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹44.3 L+₹1.6 L (3.73%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹45.1 L+₹2.3 L (5.44%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹48.3 L+₹5.6 L (13.1%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
11 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAMS
GE NAMS AMRITSAR
SPL REPAIR TO BLDG NO P-17 OR MD ACCN KHETRAPAL ENCLAVE AND OTHER SANCTIONED WORKS AT NAMS
2023_MES_580293_1
GE NAMS-79/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NAMS
CLASS D CATEGORY a(i)
8 documents required · 8 mandatory
₹500
GE NAMS
₹95,000
Yes
18 Mar 2023
10 Feb 2023
13 Mar 2023
10 Feb 2023
11 Mar 2023
25 Feb 2023
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil all as specified and directed.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc and getting out in any type of soil complete all as specified and directed.
Description all as per Srl item No. 2.00 but depth exc 1.5 m but not exc 3 m and getting out in any type of soil complete all as specified and directed.
Description all per Srl item No. 2.00 but depth exc 3 m but not exc 4.5 m and getting out in any type of soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/loose soil.
Removing excavated soils n.exc 50 m and depositing where directed at a level not exc1.5 M above the starting point complete all as specified and directed.
M&L Plain cement concrete 1:4:8, (nominal mix), type D-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified & directed.
M & L for PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring including demolition complete all as specified and directed.
M & L for PCC 1:7:12 type F-2 (using 40 mm agg.) in lean concrete including demolition complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm grade stone aggregate) as in floor sub base complete all as specified and directed.
M&L for reinforced cement concrete (design mix) type M-25 as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., complete all as specified & directed.
M&L for reinforced cement concrete (design mix) type M-25 as in columns, pillars, piers, posts and struts, complete all as specified & directed.
M&L for reinforced cement concrete (design mix) type M-25 as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified
M&L for reinforced cement concrete (design mix) type M-25 as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
M&L for brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:3 complete all as specified and directed.
M&L for brickwork with subclass 'B' bricks in one brick thick honey comb walling built in CM 1:3 complete all as specified and directed.
M&L for brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete incl demolition of brickwork /stone built in cement mortar etc all as specified and directed.
ditto- all as per Item No 18.00 above here in but except bricks.
M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed
Use & waste of form work to sides of concrete foundation, footings, bases of columns,plinth beams, rafts and raft beams and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified & directed.
Use & waste of form work to sides of pillars, posts, struts, columns etc. for rough finished surfaces of concrete, complete all as specified & directed.
Use & waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc alo splays between floors and beams for rough finished surfaces of concrete, complete all as specified & directed.
Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete, complete all as specified & directed.
Use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc. 10cm wide complete all as specified and directed.
M&L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate) mixed with liquid water proofing compound as per manufacturer's instructions complete all as specified and directed.
Supply only liquid WPC complete all as specified and directed.
Hard core of gauge not exc 63mm using broken stone or boulders, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface with broken stone aggregate, complete all as specified.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tiles exceed.06 sqm but not exc. 0.11sqm, in floors etc laid over 15mm thick screed bed in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.
M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,over15 mm thick rendering as screed bed in cement mortar (1:4) in floors, incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
Description all as per item No 30.00 above but area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado etc complete all as specified and directed.
M&L Glazed ceramic Coloured tiles 300x200x7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc.laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.
M&L for glazed ceramic coloured/printed/ dark tiles size 300x200mm x7 mm thick on vertical surface in skirting /dado ,set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC/GE, incl dismantling and rubbish off the primises etc all as specified and directed.
Description all as per item No. 33.00 above but area tiles of size exc 0.09sqm but n.exc 0.18sqm on vertical surface in skirting /dado etc.
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, finished even and smooth without using extra cement, the plinth protection shall be laid in alternate bays not exceeding 2 sqm with 10mm thick joints filled with bitumen mastic mixed with 1 part of bitumen 85/25 and 3 parts of sand by weight complete all as specified and directed.
M & L for PCC 1:3:6 type C-2 (using 40mm agg.) in plinth protection, path and paving incl demolition and rubbish off the primises all as specified and directed.
M&L, rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface finish even and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed. (WPC will be measured and paid separately).
M&L, rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.
M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair (w/o using extra cement) incl taking down old plaster on brick or stone walls ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM 1:6 on other than fair face of brick Work including finished even and smooth without using extra cement complete all as specified and directed.
M&L, Rendering 15mm thick in CM 1:6 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl taking down old plaster on brick or stone walls, scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.
M&L, Rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement complete all as specified and directed.
M&L, Rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement incl taking down old plaster on ceiling ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.
M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
M&L for preparing New plastered surfaces and applying two coats of oil bound distemper over a coat of primer on surfaces of walls complete all as specified and directed.
M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of primer on surfaces of walls complete all as specified and directed.
M & L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete (Fe 410-W (Gde-E-250) quality A) all as specified and directed.
M & L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete (Fe 410-W (Gde-E-250) quality A) Including taking down old frame with shutters and making good dismantled portion in PCC 1:2:4 type B0 including hold fast, required plaster in cement mortar 1:4 and match the existing finishing complete all as specified and directed by Engineer-in-charge all as specified and directed.
S&F powder coated anodised aluminium frame for doors, windows and ventilators of any colour with one or more rebates including joining cleat for fixing etc(thickness of powder coating not less than 50 micron ) complete all as specified.
S&F anodised aluminium powder coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 kg/m with aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock, 2 Nos aluminium handles 150mm, 3 Nos hinges 100mm, 2 Nos aluminium tower bolt 150mm with each shutter any type as directed by Engr-in-charge, complete all as specified all as specified.
S&F anodised aluminium powder coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary 4.8 to 5.5mm thick sheet glass ordinary quality & glazing/ black or PVC sheet joining with aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock, 2 Nos aluminium handles 150mm, 3 Nos hinges 100mm, 2 Nos aluminium tower bolt 150mm with each shutter any type as directed by Engr-in-charge, complete all as specified all as specified.
S&F in repair 4.8 to 5.5 mm thick sheet glass ordinary quality and glazing with aluminium clips in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed
S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.
S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed.
S&F Factory made Solid PVC Moulded Door Shutter,with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter complete all as specified and directed complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing complete all as specified and directed complete all as specified and directed.
S&F of 75mm Butt hinges, medium weight, Stainless steel, and fixed complete all as specified and directed.
S & F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, 100 mm, type C-21 complete all as specified and directed.
S&F of 150mm long Aluminium anodised, barrel tower bolts of extruded section with bright bolt 12 mm dia fixed complete all as specified
S&F for aluminum handles cast type anodized 100 mm long (ISI Marked) complete all as specified and directed.
S&F of 150mm in size extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.
S&F 250mm long and 16mm dia aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F of 200mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
S & F viterous china wash hand basin white flat back size 450 x 300 mm with leg incl PTMT waste coupling, waste pipe & plug and porcelain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.
M&L Vitreous China, wash hand basin, flat back white of size 550mmx400mm including GI brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, GI, medium grade, 32mm dia waste pipe, including cutting for and pinning in ends of brackets or erecting stand, fixed complete all as specified.
M&L Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. complete all as specified.
S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed
S&F chromium plated Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed.
S&F PVC 10 litres, valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including flush pipe of polyethylene of high density PVC, 32 mm dia for low level cistern complete all as specified and directed.
S&F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F for 15 mm bor GI tube medium grade fixed to wall or under floor incl taking up or down old tube complete including cutting chases and making good in CM 1:3 complete all as specified and directed.
S&F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc, fixed to walls and ceilings or laid in floors complete all as specified and directed
S& F in repair 20 mm bore G.I tubing in new or old location (wall/Roof) with all fittings incl taking up or down old tube complete all as specified and directed.
Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors incl taking up or down old tube and cleaning for refixing .
S&F 25 mm bore Galvanized Steel tubes, medium grade fixed to walls and ceilings or laid in floors/ trenches complete all as specified and directed
S&F 15 mm bore fancy type long body chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S & F in repair Bib tap CP fancy type/long body 15 mm bore with crutch or butterfly handle screwed down screwed to iron pipe complete all as specified and directed.
S& F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed .
S& F for in repair swan neck cast copper alloy pillar cock chromium plated fancy type screw with iron pipe 15mm dia complete all as specified and directed .
S&F angle cock fancy type cast copper alloy chromium plated screwed down high pressure with capstan head screwed for iron pipe 15 mm bore complete complete all as specified and directed.
S & F Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.
S & F in repair Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.
S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.
S&F for 125/ 110mm PVC (SWR) Gully Trap setting / jointed with solvent cement complete all as specified and directed.
S&F for 75mm PVC (SWR) nahni/ floor trap, plain with grating setting / jointed with solvent cement complete all as specified and directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified.
S&F TMT bars 6 to 8 mm dia cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified.
S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified and complete all as specified.
Supply and fxing of rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and brass ball valve 20mm, high pressure with polyethelyne float and fly nuts complete all as specified and directed.
Supply and fixing of Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe, complete all as specified.
Supply and fixing of Gun-metal, globe or gate valves of 25mm dia, with iron wheel head, screwed both ends for iron pipe, complete all as specified.
Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 110 mm dia fixed to walls all as specified and directed by Engineer-in-charge.
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 75 mm dia fixed to walls
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
M&L concrete bed to 100mm bore pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:3:6 (Nominal mix) type C-2 using 40mm graded stone aggregate, and tested, complete all as specified & directed.
M & L for repair to RCC Chajjas, roof projection edges, hanging part of chajjas, edges of chajjas, RCC papafeets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl neccasary renforcement 8mm to 12mm TMT bars , form work , MS wire mesh for bounding the concrete on ground required and plaster work in CM 1:3 & periodical services to match with the existing surfaces finishing at any height of buildings etc completed all as specified and directed by Engr-in-Charge.
S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples / beading complete all as specified and directed.
Supply and fxing of rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and brass ball valve 20mm, high pressure with polyethelyne float and fly nuts complete as specified and directed including disconnecting old and taking down complete all as specified and directed.
Description all as per Item No 111.00 above but 1000 litres water storage tanks.
M&L for granite 20 mm thick fix to wall as partition between urinals incl rubbing and polising incl moulding rounding to edges of granite complete all as specified and directed.
M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as specified and directed
S&F in repair 18/19 mm prelaminated particle board, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/steel frame work complete all as specified and directed.
Material & labour for two coats of synthetic enamel painting over a coat of red oxide to new steel or steel based surfaces of any description, over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.
M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.
S&F in repair for Door closer Aluminium (extruded section) body hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.
S&F in repair PVC waste pipe 32 mm to 40 mm dia (corrugated) for wash hand basin/sink fixed in repair complete all as specified and directed.
S&F in repair for CP fancy type 100mm size chromium plated shower roses with or without swivel joints, any size including fixsing to steel pipe or union complete all as specified and directed.
S&F in repair PVC 10 litres, valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle including flush pipe of polyethylene of high density PVC, 32 mm dia for low level cistern complete all as specified and directed
S & F in repair for viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.
S & F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.
S & F in repair for viterous china wash hand basin white flat back size 550 x 400 mm with leg incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.
S&F in repair hole wash basin mixer round spout with 375 mm long braided hoses complete all as specified and directed .
S & F in repair wall mixer 15 mm bore (fancy type) cast copper alloy with capstan head,CP screwed down high pressure with long screwed both ends for iron pipe as per union complete all as specified and directed.
S&F Health Faucet hand shower with 8mm dia 1mtr long flexible tube wall hook complete all as specified and directed .
S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe complete all as specifed and dirtected.
S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc incl taking down old pipe complete all as specifed and dirtected.
S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc complete incl taking down old pipe complete all as specifed and dirtected.
S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)
S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)
S & F in repair vitreous china ware over counter ovel wash hand basin, any colour, size 570 x 450 mm size including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe , CP waste coupling & bottle trap all as specified and approved by Enger-in-Charge.
M &L toilet paper holder stainless steel recessed type complete all as specified and directed
S&F corner shelf with two corner straight of length 250 mm and one side circular of 5.5mm thick with brass chromium plated bricket compleate all as specified and directed.
S&F Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed .
S&F Ball valves brass insert, bore size 20mm fixed with GI tubing all as specified and directed.
S & F vitreous china urinals, half stall type (420 x 395 x 635 mm), complete including providing and fixing, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, grating and union for discharge pipe, CP urinal spreader and fitting with bottel trap & CP waste coupling all as specified and approved by Engr-in-Charge.
S & F in repair vitreous china urinals, half stall type (420 x 395 x 635 mm) , complete including providing and fixing, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, grating and union for discharge pipe, CP urinal spreader and fitting with bottel trap & CP waste coupling all as specified and approved by Engr-in-Charge.
S&F harrison rails Aluminum Curtain Rails colour powder coated 25mm size with brackets including screws fixing of walls complete all specified and directed.
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) complete all as specified and directed.
M&L For MS bands, straps, suppport or rungs and similar small articles confirming to Fe-290 Gde - 165 complete all as specified and as directed
Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm dia of pipe complete all as specified and as directed
Removing Excavated soils exceeding 250M but not exceeding 500M and depositing where directed.
S&F 150mm dia salt glazed stone ware drain pipe laid in trenches and jointed in cement mortar all as specified.
M&L brick bats filling in soakage well all as specified and directed.
M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry complete all as specified and directed.
S & F Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.
M&L Concrete bed to drain pipes 110mm bore in PCC 1:4:8 type D-2 including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for pre cast man hole covers in RCC 1:2:4 type B1 using 20mm graded stone agg. and set in CM 1:4 all as specified.
Dismantling of brick tiles or terracing tiles, single layer on roofs, complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and diposing the rubbish to a distance exceeding 500 mtr, complete all as specified and directed.
Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified.
M&L for preparation of roof surface and applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not less than 150mm complete all as specified. Note: Treatment to be carried out by Company approved applicator
M&L, for 40 mm thick brick tiles bedded in 15mm thick cement mortar (1:6) and joints grouted flush incl pointing in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.
Description all as per Srl item No 156.00 here-in-before but except tiles.
Taking down cement plaster on brick, concrete or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed.
Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying one coat of white wash on walls, complete all as specified.
M&L for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.
Washing, rubbing down and stopping of distempered and old decorated surfaces of walls inclusing cornices etc and applying one coat of cement base paint, tint and shade as approved by the Engr-in-Charge.
M&L for one layer of compound of wall care putty 1mm th on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed.
S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl taking down old shutter complete all as specified and directed.
S & F 35 mm thick glazed and skelton shutters open rebated and prepared to receive glass, gauze, etc. (Without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR part-I, saection 8, clause 8.24 (a) incl taking down old shutter complete all as specified and directed.
M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
Supply and fixing light/ dark shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floor,skirting etc set jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 including dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
S&F in repair mild steel 300mm long , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Material and Labour for road cutting, including excavation, returning filling in, spreading, leveling, well ramming in layers, soling with broken boulders/stones, received from dismantling the existing road rolled and compacted for road patch repair work to match the existing surface complete all as specified and directed.
M&L for cutting of existing steel tubing of any size for alternation/ addition of pipes complete all as specified and as directed.
Supply & fix in replacement Ductile iron pipe double flanged type, class K-9 ISI marked with internal cement mortar lining and external zinc and bitumen coated pipes 100 mm bore confirming to IS 8329 : 2000 with all required DI fittings complete all as specified and directed. Note : Earth work will be measured and paid separately.
Supply, installation and testing of Non Clog vertical submersible pump 600 LPM, 20.6 Mtr head 9.5 HP with chrome steel impeller and cutter, Non clog to pass 40 mm size particles including with guide rail and lifting chain, cables, Earthing, Testing complete all as specified.
Material and labour for Hydal from MS pipe 300 mm x 3 Feet including cutting, jointing and welding work, providing sluice valve 02 Nos (150 mm dia) and Non return valve-02 Nos (150 mm dia) complete with all fitting required on ground for job all as specified and directed by Engr-in-Charge.
Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed
M & L for Point wiring with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in and incl new PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick plastic laminated sheet top cover fixed with cadium plated iron screws, including terminal box 1.6 mm thick GI sunken boxes and 1.5 sqmm FRLS unsheathed multi stranded flexible copper conductor cable with green PVC insulation as earth contunity conductor connected to comman earth dolly complete all as specified and directed NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)
Description all as per item 174.00 here in before but one three pin 5 Amps socket outlet on the same board with other switches.
Description all as per item 174.00 here in before but for one three pin socket outlet 5 Amps independent board complete
M & L for Point wiring with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in existing PVC concealed conduit for one light / fan point or bell point controlled by one switch and fixing new 3 mm thick plastic laminated sheet top cover fixed with cadium plated iron screws, including terminal box 1.6 mm thick GI sunken boxes and 1.5 sqmm FRLS unsheathed multi stranded flexible copper conductor cable with green PVC insulation as earth contunity conductor connected to comman earth dolly complete all as specified and directed NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)
Description all as per item 177.00 here in before but one three pin 5 Amps socket outlet on the same board with other switches.
Description all as per item 177.00 here in before but for one three pin socket outlet 5 Amps independent board complete
Description all a per item No 177.00 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.
S/F switch piano type 6 Amps one way 230 Volts AC complete all as specified and directed.
Supply and fixing socket outlet 5 pin, 6 Amps flush type 230 Volts AC complete all as specified and directed.
S/F switch piano type 16 Amps one way 230 Volts AC complete all as specified and directed.
Supply and fixing socket outlet 6 pin, 6/16 Amps multi purpose flush type 230 Volts AC complete all as specified and directed.
Supply and Fixing switch type regulator 5 step 230 volts AC complete all as specified and as directed
Supply and Fixing Ceiling rose 65x50 mm surface polycarbonated, three terminals.
Material and labour of lamp holder insulated body with 10 watt LED Bulb, back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm 230V AC cool day light 6500K having maximum height 1020 mm heavy duty complete all as specified.
Supply and fix of MCB 32 Amps double pole, AC 230 Volts with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.
Supply and fix of MCB 40 Amps single pole and neutral, AC 230 Volts with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.
Supply and fix of MCB 40 Amps single pole, AC 230 Volts with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.
Supply and fix of MCBs single pole (SP) 6 to 32 Amps, AC 230 Volts with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.
Supply and fix factory made sheet metal enclosure powder coated double door single pole and neutral (SPN) distribution board for MCB provisions 230Volt, 50Hz AC supply for 04 way. fitted with copper bus bar rated 200 amps, neutral link , earth bar complete all as specified and directed.
Supply and fix replacement factory made sheet metal enclosure powder coated single door single pole and neutral (SPN) distribution board for MCB provisions 230Volt, 50Hz AC supply for 08 way. fitted with copper bus bar rated 200amps, neutral link , earth bar complete all as specified and directed.
Supply & fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed.
Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed with the following accessories :- (a) MCCB 125 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. Note:- Out going MCB shall be measured and paid for separately
Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia suspension GI wire with stranded conductor 6 Sqmm twin core cable flat or circular, complete all as specified.
Supply and fix in replacement for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.
Supply and fix exhaust fan AC 230 volts 250 mm high quality engineering plastic complete with louvers and shutter complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single phase, 230 V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed.
Supply & fix of LED Street Light Luminaire 25 watt 6000K with high power LED cool white, CRI 75,+/- 5% supply voltage 220/240 50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens complete all as specified and directed.
Supply and fixing bracket made out of GI pipe 40 mm medium grade 1.2 mtr long made to shape with fixing clamps of MS flat 40x6mm nut bolts etc for street light all as specified and directed.
Supply and fixing of LED T-8 tube light fitting with single side connection polycarbonate LED tube rod 20/22W 4 feet with CRCA box Suitable box complete including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.
Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE of cross section area 10 sqmm 2 core, PVC insulated, armoured heavy duty electric cable with aluminum conductor, 1100 Volts grade.
Taking down the ceiling fan and refixing after servicing, repairing and painting to ceiling fan including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI wire of size 4 mm dia and 15 mm dia bore 7.5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009.
ss enterprises
tarvinder singh
tarlok singh contractor
M/s MAHAJAN CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .