SPL RPS TO CEILING FAN,COOLING APPLIANCES AT CGDHQ-10 AND INS BAAZ, PROVN OF CHEMICAL EARTHING AT NGMMCB DET1, SERVO STABILIZER AT MET DEPT, BOOM BARRIER AT INS BAAZ, ELECTRIC POWER SUPPLY AT CGDHQ-10, CAMPBELL BAY UNDER GE(I) CAMPBELL BAY

Amount

B/R PORTION Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil including cutting of roots/ branches below ground level whereever required complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm in hard/dense soil complete all as directed.

Removing excavated/ demolished material to a distance n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed.

M & L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation and mass concrete for angle iron post complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry type C-1, (1:3:6), (using 20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6), complete all as specified and directed.

M & L for hard core of broken stone of gauge n.exc 63mm deposited spread and leveled in layers ,watered and rammed to true surface in plinth protection/ hard standing complete all as specified and as directed.

M & L for providing 100mm thick PCC type D-2, (1:4:8) (using 40mm graded stone aggregate) laid in floor sub base cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M & L for providing 40 mm thick cement concrete (1 : 2 : 4) type B-1 (using 20mm graded crushed stone aggregate) laid in base, cement concrete surface even and smooth w/o using extra cement complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) in walls, finished even and smooth without using extra cement all as specified and as directed.

M & L for 15mm thick rendering in CM (1:4) on external surfaces finished even and smooth without using extra cement mixed with WPC as per manufacturer's instruction all as specified and as directed. Note : WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

M & L for preparing of new surfaces and applying two coats of anti-fungal exterior emulsion paint over a coat of anti fungal primer on external surfaces of walls and ceilings/ chajjas projections complete all as specified & as directed.

S & F Steel work as in tubular trusses & purlin members including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any shade) over a coat of red oxide zinc chrome primer complete all as specified and as directed

M & L for providing 75mm thick PCC type C-2, (1:3:6) (using 40mm graded stone aggregate) laid in plinth protection/ floor sub base cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M & L for providing 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) laid in floor sub base cement concrete surface even and smooth without using extra cement as in path complete all as specified and as directed.

M & L for providing 40 mm thick cement concrete (1 : 2 : 4) type B-0 (using 12.5mm graded crushed stone aggregate) laid in base, cement concrete surface even and smooth w/o using extra cement complete all as specified and as directed.

M & L for forming Contraction (Dummy) joints 65mm deep X 10mm wide, filled with sealing compound grade 'B' complete all as specified and as directed.

E/M PORTION Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 Sqmm 2.0 core complete all as specified and as directed.

S & F of HDPE double wall corrugated pipe confirming to IS -14930 Part with IP protection IP-67 having inner dia 50 mm complete terminated up to termination end point complete all as specified and as directed.

Excavation in trenches in hard/dense soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables and getting out of excavated material complete all as specified and directed.

S & F sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43, 4 way with 200 Amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

S & F MCB SPN 16-25 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

M & L for Earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 3 of SSR PART 1 of 2009 to the earthing test point inc testing on completion all as specified and as directed. Note :- (i)The cost of excavation and earth work PCC pit and RCC cover funnel & watering pipe, wiremesh, charcoal dust and common salt earth lead protection pipe upto 7.5 Rmt shall be deemed included in the unit rate for earthing (ii) On testing after completion, if the desired earth resistance is not obtained the earthing will be redone to the entire satisfaction of Engr-in-Charge at no extra cost.

Supply, installation, testing and commissioning of electrically operated boom barrier of 4 mtr length, fully raised & lowered position with limit switches and manual operation in case of power failure, electronic control panel with IP54 rating including remote, warning lamp, photo cell etc including necessary PCC foundation & coping for boom housing as directed by OEM/ Engr-in-Charge

S & F of Energy efficient 5 Star Rating, BLDC motor, dust proof, Ceiling Fan 1200 mm Sweep size,copper winding with minimum air delivery of 210 cu.mtr/min,A.C, single phase, 220 volt 50 Hz including canopy reel , fliexible copper conductor fixing with necessary lugs drawn through flexible pvc conduit from ceiling rose,including necessary hook, rubber bush & safety pin all necessary accessories including removal of old ceiling fan complete all as specified and as directed.

Supply, Install, testing and commissioning 10 KVA Single phase servo voltage stabilizer confirming to IS 9815 with specifications as input voltage 110-280V, output voltage 230 Volts, 50 Hz, digital micro controlled, control backed servo by solid state electronics, digital metering to read input & output voltage, with indicator bulbs and switches all as specified and as directed.

Supply, Install, testing and commissioning 4 KVA Single phase servo voltage stabilizer confirming to IS 9815 with specifications as input voltage 110-280V, output voltage 230 Volts, 50 Hz, digital micro controlled, control backed servo by solid state electronics, digital metering to read input & output voltage, with indicator bulbs and switches all as specified and as directed.

M & L for sub main wiring complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including non-metallic PVC casing caping and accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including making good the disturbed surface all as specified and directed. Note: 3 run of 6 sqmm & one run of casing caping shall be measured as single unit

S & F MCB SPN, 40 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc., complete all as specified and as directed.

S & F MCB SPN, 16-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

S & F MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

Supply & install hiwall split units indoor / outdoor complete with cordless remote control unit and with in built cooling arrangements and digital invertor type of capacity 1.5 TR 5 star rating complete all as specifed & directed by Engineer-in-Charge

Supply & install hiwall split units indoor / outdoor complete with cordless remote control unit and with in built cooling arrangements and digital invertor type of capacity 2.0 TR 5 star rating complete all as specifed & directed by Engineer-in-Charge

Supply, installation, commissioning of Water cooler 40/80 LTR fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity complete all as specifed & directed by Engineer-in-Charge

S & F refrigerator, electric driven (single phase), capacity minimum 300 Litres upto to 310 Litres, BEE 5 star rated complete all as specifed & directed.

Supply, installation, testing and commissioning of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA all as specified and directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA all as specified and directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA all as specified and directed by Engineer-in-Charge.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified and as directed by Engineer-in- Charge.

M & L for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2 x 4.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 4.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire complete as directed by Engr in Charge Note: 3 run of 4 sqmm & one run of casing caping shall be measured as single unit

M & L for supply, installation, testing and commissioning of copper pipe electrode earthing maintenance free earthing based on 3 mtr long copper pipe 18mm dia (ID) with wall thickness of 2mm, copper strip in pipe and filled with MFC for improvement of conductivity of electrode duly fixed with connector at top connection of copper strip 25 x 3mm riveted/ nut bolt after 12mm boring and further earth continuity conductor made of copper strip 25 x 3 mm upto 7.5m., 60 Kg BFC shall be filled around the copper pipe electrode, including providing FRP pit cover of size 250mm x 250mm x 250mm complete as per manufacturer specification and complete all as specified and directed by Engr-in-Charge. Note:- (i) Rate included for testing, commissioning including checking of earth continuity and earth result complete all as specified and directed. (ii) Vendors are bound to get earthing result upto 1 Ohm with grid of three earthings, Any additional work and material required to achieve the required result is included in the cost. (iii) Earth strip beyond 7.5 m shall be measured and paid separately. (iv) Earth work is deemed to be included in the quoted rate. (v) Grid of 3 Earthing will be treated as one job.

M & L for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for one light point controlled by one switch all as specified and as directed.

Description all as per item No 47 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 Amps on Independent board complete all as specified and as directed.

Description all as per item No 47 above but 2.5 sq mm cable size and 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on Independent board complete all as specified and as directed.

M & L for sub main wiring (concealed) complete with four single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 4 sqmm & one run of PVC conduit shall be measured as single unit.

S & F wall mounted LED 18/20 watts 6500 K with out put of 1800 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of suitable size from ceiling rose to fitting with integral LED tube 4' x 18 watts including removal old existing unsv tube light fitting complete all as specified and as directed.

S & F Wall mounted fan hi speed of size 16" plastic body including all acessories and connected material complete all as specified and directed.

S & F modular type, single pole one way 6 Amps, 240 volts AC suitable for existing modular switch boxes without indicator, all as specified and as directed.

S & F socket modular type single pole one way 6 Amps 240 volts suitable for existing modular switch boxes all as specified and as directed.

S & F socket modular type 16 Amps, 3 pin combine, 2 module, 240 volts suitable for existing modular switch boxes all as specified and as directed.

S & F switch modular type 16 Amps,one way with indicator, 1 module, 240 volts suitable for existing modular switch boxes all as specified and as directed.

S & F for ceiling rose, surface bakelite, 65 x 50 mm, three terminals, ISI marked all as specified and as directed.

S & F sheet metal enclosure with Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB of 32 amp all as specified and as directed.

S & F sheet metal enclosures for DB V-TPN for incorporating MCCB as incoming & MCBs, TP, 6 way as outgoing, IP-43 with metal double door with 200 Amps rated busbar, 415 volts, as per IS-8623, all as specified and as directed.

S & F MCCB 100 Amps adjustable type with 16 KA breaking capacity complete all as specified and directed.

S & F MCCB 63 Amps adjustable type with 16 KA breaking capacity complete all as specified and directed.

S & F MCB TP, 32-63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc., complete all as specified and as directed.

S & F sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 Amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 3.5 core complete all as specified and as directed.

ICON AGENCIES (BID ID -3278283)

T.M.RAMANATHAN AND SONS (BID ID -3281878)

S Rajan (BID ID -3281851)

KCM BUILDERS & CONSTRUCTIONS (INDIA) PVT.LTD (BID ID -3281634)

USR Transport (BID ID -3282022)