WBPWD/EE/CKHED/ eNIT-30/24-25

Amount

Supply & Delivery of 7.5-TR capacity concealed type Split Air Conditioner of following specification : rated cooling capacity : 90,000 BTU/Hr. compressor : 3 Nos Rotary type. refrigerant : R- 410A, IDU : 3no. of 230V,50Hz,1-Ph. ODU : 1no. of ,415V,50Hz,3-Ph. Air-flow/per IDU:-1000CFM. Casing size of IDU : (1130mm x280mm x532mm)(WxHxD) approx, Casing size of ODU : (1350mm x600mm x840mm)(WxHxD) approx, (Make : Hitachi/O-General/Mitsubishi Elect./Eqv. EIC Approved).

Lifting,Shifting,Installation,Testing & Commissioning of IDU & ODU of following capacities concealed type Split Air Conditioners machines,after Cutting of holes in wall for laying of copper pipe lines & mending good the damages to the original finish. scaffolding arrangement,labour cost etc.on both side(IDU & ODU Installation), and also connecting rod/rope from the ceiling must be attached into the machine by nuts,bolts etc. as per recurement with incl. Supply of required Refrigerant R-410A ,S&F of necy. fixing arrangement for indoor & Outdoor duly painted etc. as per direction of EIC if required. i).7.5-TR

Supply fabrication and fixing specically for indoor unit should be supported with ms channel by 2 nos of 40mm x 40mm x 6mm to distribute the total load from the mounted wall and by drilling holes for 4nos downrod & connecting the downrod into the channel by nuts,bolts etc. & including supporting angle 25 mm x 25mm x 6mm arrangement as per direction of EIC.

Supplying fabrication & fixing of 2nos U-Channel (TATA Make) of size (75 mm x 50 mm x 50mm x 6mm thick) for making platform for instalation of outdoor unit of 7.5 TR Concealed type split AC incl. drilling 2nos holes in each channel as per site condition & as per direction of EIC. incl. cutting holes into the wall & grouting the same with cement concrete (M20 grade) etc incl. mending as orginal and fabricated with horizontal angle of 25 mm x 25 mm x 6mm including supporting angle 50 mm x50mm x 6mm in each platform in outer edge for transmitting the load centrally through 2Nos (50 mm x50 mm x 6 mm) Angle inserted to the exiting wall The entire structure should be baricated & safe for ODU maintenance Area of the platform is 2Mx1.2M. incl. scaffolding arrangement,labour cost etc.(Structural design should be approved from EIC.)

Supply and fixing of AI powder coated continuous Grill (Make- Premier, Dynacraft/ EIC approved.)

Copper Refrigeration pipe line for liquid and suction line with fittings, elbows, bends, supports & brackets etc. (Make- Ryoku/Totaline/Jobu/ Nippon/EIC Approved) *Suction Line (5/8 OD with 0.7mm thick)

*Liquid Line (3/8" OD with 0.6 mm thick)

Supply & Fixing Pipe Insulation in liquid & suction line with 9mm nitrile rubber tube (Supreme/Accoflex/Armacell/EIC Approved) *Suction Line (5/8 OD with 0.7mm thick)

*Liquid Line (3/8" OD with 0.6 mm thick)

Supply and laying Control copper Cable (PVC insulated & unshethed,un-armoured) from Condensing Unit to IDU control panel (Make: Havells/RR Kable /finolex/EIC Approved ) *4 core 2.5 sq mm communication cable.

Supply and laying of Drain Water piping work out of PVC/HDPE hard pipes of following sizes incl. fiting accessories bends, elbows, tees flanges, tapings, wall sleeves hangers, supports, anchors etc. as required. (Make : Supreme / Astral/ EIC approved). a) 25 mm dia.

b) 50 mm dia.

Supply & Fixing Pipe Insulation for 25 MM dia drain pipe with 9mm nitrile rubber tube (Supreme/Accoflex/Armacell/EIC Approved)

Modification of window grill for accessing outdoor unit of Concealed Air conditioning Machines by cutting the grill/wooden window and making Neccy arrangement by welding , grinding inch. S/F Hinge and Lock & key , as per direction of EIC.

Supplying and fixing 250A, 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.[L&T] [D3:4a]

Supplying and fixing sheet steel (16SWG) cable end box on 250A TPN SFU enclosure with nuts bolts etc incl. powder coated painting.

Supply and fixing double door Vertical-TPN-MCB DB housing for MCCB incomer and TP-MCBs as outgoing with IP-43 protection, fixed on wall on iron flat/angle & mending good the damages to original finish & necy. wall matching paint as required wall incl. inter connection with suitable size of MCCB spreader link and copper wire and neutral link & provision for earthing attachment require. [D11:15] LEGRAND EKINOX : Upto 250A,Enclosure (607724)-12-way

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, on Angle Iron Frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment,2+12 way, (Make:Legrand) [D-09/13]

Supply and fixing 415V/240V, of following rating "C"-curve MCBs (10kA)/MCCBs(35kA)(Legrand Make) on din rail in existing VTPNDB/TPN-DBs/SPN-DBs and necy. connection as required. 160A(35kA)FP MCCBs. [D8:10]

63A(10kA)TP MCBs. [D6:07]

MCB,6-32 A,SP

MCB,32 A,DP

S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: [F4:7d] 4.0 core 240sq mm..

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 core240 sqmm. [F5:8b(xix)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (RR/Havells/Finolex) in 20mm/25/35mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required(E-14/1,) 4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC [VTPNDB to 3Ph Timer DB to O/D Loop box]

ii)2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

iii). 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Finishing of the PVC insulated wire ends by socketing with pin/ ring type copper sockets and insulated tapes etc.,including supplying sockets, tapes. [F5:9(iii)] i)6sq mm.

ii)4sq mm.

iii)2.5sq mm.

iv)1.5sq mm.

Supply and fixing 4-way MCB SS enclosure with IP-20/30 protection, [Legrand ] powder coated & S&F of 32/40A,4pole MCB in DIN channel, concealed in wall after cutting the wall or mount it on the wall surface on flat iron frame & mending good the damages to the original finish incl. inter-connection with suitable size of copper wire, necy. painting,& provision for earthing attachment etc. as required.

Supply & Fixing Moisture proof,water-proof (outdoor type IP-65) PVC (Hencel/sintex) looping cable box size 300x250x150mm deep having 2/3 mm thick body enclosure , with 4way copper terminal and having lined with rubber gasketed top cover should be fixed on wall by screws,nuts,washers etc, necy. socketting, rubber gasketted entry and exit as mending the good damages as original with proper finishing at terminal is required. i) comprising of one no.415 V,63Amp FP Isolator on din channel ('C'-curve,legrand make)

Supplying & fixing of 415V, Timer DB Fixed on Wall by flat iron/Angle frame or as per direction of EIC . The Box should comprising following accessories......... A).Double-door SPN-MCB Distribution Board with IP-42/43 protection 2+10 way make Legrand/L&T or as to GS. B). 1No. 250V ,50Hz,16 Amp Digital daily & weekly time switches(Make L&T-67DDT0/Eqv. legrand) C)1No 415V,40A FP-Contractor(Make-L&T/Eqv. legrand). D)1No. 415V,40A FP-MCB(Make-L&T/Eqv. legrand). E)1 No. Toggle Switch(Pass & Seymour) should be fixed inside the box. F)1Nos LED Indication Lamp for running condition. G)The complete arrangement must be wiring by suitable size of PVC insulated Cu wire with suitable socket/lugs as per requirement & direction by EIC .

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.[E-14/2] i)Average run 10 mtr.

ii). On Board

Supply & Fixing Socket type fan regulator (Step type)(Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/ perspex top cover incl. making neccessary. connections etc. [E6:18a]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required . [E-6/22]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-7/25]

Supply and delivery of commercial type indoor mounting retrofit rail for DOUBLE LED tube light frame complete with all accessories as required. [PHILIPS-TMC-501-P-2XT-LED-P3241]/Eqv. Wipro#

supply & delivery of 240V, 18W,2100lm ,4Feet LED tube light. [PHILIPS-Master LED tube 1200mm 18W-865 T8 IND I or wipro]

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required.(C-2/14/d)

Fixing only LED tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5 sqmm) flexible copper wire of 1.10mt. length. [C2:15]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.[C2/16]

Supply & Delivery of 48",1200mm,,230volt single phase AC ceiling fan (Brown in colour) inch. All acessories (blades,canopy,fork, rubber bush etc.) & the capacitor of the fan should be P-2 type burst proof & must have safety wire/rope directly from fan hook to stator of the fan ceiling. [make:Orient ENERGY STAR, 1200 mm Brown ]

Fixing only fan clamp for RC ceiling as per specification after cutting the ceiling & binding with reinforcement and mending good the damages.[C3:27]

Supply & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [D14:29]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.(C3/21a)

Supply & delivery of 450mm,(18''),rpm-1420,230volt,85Watt wall bracket Fan[EPC Make] comprising with 4nos blade, metal body, heavy duty fan complete with all accessories..

Fixing the wall bracket fan into the wall by fastnuts,screws etc as per direction of EIC.

Supply & delivery of (12''),rpm-1420,230volt,80watt metal body heavy duty exaust fan[EPC Make] complete with all accessories.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: [C-4/28] 30 cm (12")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For GI 30 cm Exhaust fan (12").

Supply & Fixing of 240v, 12 VAC/DC LED indication lamp for existing timer DB.

Supply & Delivery of 3ft length steel lock chain for locking arrangement of equipment,ladder,inspection door etc.

Supply & Delivery of round long shakle Lock & Key.(Link round 50 Double locking-3Keys)

Supply & Delivery of handheld Thermal Imager having 320x240 resolution(76800 pixels) ,minimum 3.5 inches,Colour LCD/LED screen ,minimum 4GB internal memory and expandable with micro SD card,replacable lithium-iron or lithium polymer batteries with charger,Data cable ,carring case, & software required for computer connectivity and having minimum 2 years warranty.incl. all related accessories with this item . *(Fluke TIS20+ 9 Hz Thermal imaging Camera).

Rate should be quoted including of all taxes, duty and cess

Defect Liability period : 1 year

SKY DECORATIONS PRIVATE LIMITED (BID ID -5738815)

SUPARNA REFRIZARATION (BID ID -5732823)