Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.4 LAccepted-AOC | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹49.5 L+₹48,974.67 (1.00%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹49.9 L+₹93,501.14 (1.91%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹50.4 L+₹1.5 L (3.00%)Rejected-Finance NA | L4 | Rejected-Finance L4 | |
| 5 | L5₹50.9 L+₹2.0 L (4.01%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
5 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S K Yadav GE(S) BATHINDA
GE(S) Bathinda Bathinda Mil Stn
GE(S) BTD 50 OF 2024-25 REPAIR REPALCEMENT OF JOINERY CUPBOARD SHUTTER FRAME STEEL GARAGE SHUTTER AND OTHER MISC WORK TO VARIOUS BLDGS OF KHETARPAL ENCLAVE AND TARAPORE ENCLAVE UNDER AGE BR I UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION
2024_MES_659539_1
GE(S) BTD- 50 OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE(S) Bathinda
Class D
category a(i)
11 documents required · 11 mandatory
₹500
GE(S) Bathinda
₹98,000
Yes
9 Sept 2024
13 Jun 2024
8 Jul 2024
28 Jun 2024
5 Jul 2024
28 Jun 2024
Amount
Comprehensive maintenance for Carpentry work by attending day to day complaints of joinery related such as replacement of Builders hardware of doors, windows & cupboard and other Carpentry nature works like easing of door, windows and cupboards. Tightening of screws for tower bolt/Aldrop bolt/ stoppers ,handle hinges in respect to Easing of door / windows/cupboards (SteelWooden/Aluminium) of any description and size by cleaning, adjusting in position and making the same functional incl small repairs if reqd with and incl greasing, oiling, screws/nales for fixing the fittings.
Comprehensive maintenance to masonary work by attending day to day complaints of masonary related works such as plastering of wall/ceiling/chajja/making of jambs, soffit, cills etc of size not exceeding 0.25 sqm or on patch work including finishing with distemper/white wash/cement based paint/exterior emulsion paint including two coats of putty as required at site to match with existing surface.
Note for item No 01& 02. The scope of work is of day to day maintenance nature/ requirement of works. Contractor shall attend the office of AGE B/R-I on daily basis and receive/ collect the complaints/ requirements of works and shall rectify the repair/maintenance works within time given below :- (a) Minor plumbing complaints - 48 hours (b) Minor Joinery complaints - 48 hours (c) Minor masonary complaints - 48 hours (d) Major Plumbing - 5 days (e) Major Joinery - 15 Days. If contractor fails to rectify the complaints with materials/ items to be replaced if required a penalty @ 50% of quoted rate by the contractors of that particular item shall be recovered from his payment. The responsibility of getting the complaints attended & rectified shall lies with the contractor even if he fails to complete the complaints within 48 hours. In the delayed case of a rectification of complaints even after 48 hours, he shall rectify the same within one week. (Note :- The complaint received from complaint cell shall have to be attended on same day).
Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames).
Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames).
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each and removed from site all as specified
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified
Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including necessary finishing of wall for fixing of frame complete as per direction of Engineer-in-Charge.
Ditto all as per item No. 9.00 above but of Frame size 65 x 100 mm
Ditto all as per item No. 9.00 above but of double shutter frame size 65 x 125 mm
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges (03 Nos Minimum), Stainless steel fancy type door handle, tower bolt and sliding bolt as approved by GE with necessary fixing arrangement of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge.
Supply and fixing mild steel framed work such as grills, guard bars, gate, gratings, door frame etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and as directed
S&F in repairs Mild steel galvanised wire cloth 0.46mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified
S & F in repairs 300mm mild steel ordinary rat tail rod springs, including roller & roller plate complete all as specified
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips
S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm in each pane all as specified
S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane all as specified
S & F 4.8mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm in each pane all as specified
S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane all as specified
S & F 4.8mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.50 Sqm in each pane all as specified
M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all aspecified
S & F in repairs soap dish stainless steel , complete all as specified
S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 90 cm all as specified
S&F in repairs stainless steel plate racks of size 900mmx900mmx300mm and thickness of SS strip 1mm, fixed on wall etc complete all as specified & directed by Engr-in-Charge.
S & F in repairs mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified
M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed by Engineer - in – Charge.
S & F in repairs 200 mm aluminium anodised, barrel tower bolts of extruded section all as specified
Supply and fixing in repair 125 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.
S&F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6.
S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6.
M & L 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as sppecified
S&F 2nd Class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars )
M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6..
S&F factory made solid panel shutter (PVC) 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications.
S&F 100mm Butt hinges, extruded aluminium alloy with galvanished mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm gde stone agg) as in filling of Chowkhats complete all as specified and directed.
S&F for galvanised MS wire cloth 0.46 mm nomiral dia and wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples.
S&F of MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete as specified
S&F butt hinges 100mm medium weight cold rolled mild steel and fixed complete all as specified.
S&F for MS tower bolt 200 mm long stove enamelled black with bright bolt.
S&F for MS sliding door bolt 250 mm long stove enamelled black with bright bolt etc.
S&F for MS pressed handles, oval type stove enamelled black 125 mm long.
S&F for Aluminium handles, cast type anodised 125 mm long for cup boards and doors.
M & L for MS work as in framed brackets of angles as sink brackets and cooler stand.
Dismantling boarding any description fixed in any position with rails incl fillets
S&F 18/19 mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber framed work.
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm all as specified
M&L for 25mm dia stainless steel pipe curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all aspecified
S&F in repairs end knobs for PVC coated MS pipe curtain rods, complete all as specified
S&F in repairs telescopic hinges for drawers etc, taking out drawers & refixing the same after replacement of hinges etc complete all as specified
Supply and fixing in repair 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and fixed complete all as specified and directed.
S & F for catcher such as in cupboards etc to catch & support shutters of best quality all as specified
S & F in repair floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring all as specified Each 150.00 89.30 13395.00 9149
Re-securing or easing & adjusting, without taking down shutter of any description exc 1 sqm but n. exc 2.0 sqm each complete all as specified and directed.
Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and directed.
S&F in repair aluminium (extruded section ) boty door closer hydraulically regulated designation No 2, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixed complete all as specified.
S &F PTMT mirror cabinet of size 380x450mm best quality confirming to sample kept in GE's office, complete all as specified,
S & F Corner glass shelf (25cm/30cm ) with CP brass bracket & railing etc; complete all as specified
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard & railing 60 cm long, complete all as specified
S & F in repairs brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap all as specified
M&L Prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in wall, fixed with self tapping screws all as specified including dismantling old sheet of any description complete all as specified and directed
M&L mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240roof trusses/framing for roofing, purlins, grill/guard bars, gates etc; of any section, complete all as specified
Periodical inspection, checking various parts, greasing/oiling as required to make the sliding steel door/rolling shutters gear/hand operated/electrical operated for easy and smooth operation all as specified and details of sizes and pattern of the following sizes:- (a) Mild steel door of any type area exceeding 05 Sqm and not exceeding 10 Sqm, complete all as specified and as directed by Engineer-in-Charge.
Rolling shutter hand operated/gear operated/electrically operated of area exceeding 04 Sqm but not exceeding 09 Sqm, complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs rolling shutter lathe of 1.25mm thickness, shutter slots, complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs MS springs suitable for rolling shutters of any size, complete all as specified and as directed by Engineer-in-Charge.
S & F for mild steel rolling shutter shaft 40-50mm dia as required, class 'C' including cutting, welding drilling holes and re-fixing the bearing and other mounted accessories for rolling shutters of any size, complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs ball bearing suitable for rolling shutters of any size as ordered, complete all as specified and as directed by Engineer-in-Charge.
Taking down the existing unserviceable locking lever from the rolling shutters and supply and fix new locking arrangement for the rolling shutter of any size and type including welding/ fixing with nuts and bolts etc, complete all as specified and as directed by Engineer-in-Charge.
Taking down complete rolling shutter of any size and repair and replacement of damaged parts of rolling shutter and welding, oiling, greasing complete and re-fixing back in its original position and making good to disturbed surface and including one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer, complete all as specified and as directed by Engineer-in-Charge.
Making good jambs, cills etc., with cement mortar (1:4) and matching with the adjacent surfaces, complete all as specified and as directed by Engineer-in-Charge.
Dismantling structural or mild steel work including doors, gates, stairs, grills windows and other miscellaneous items, complete all as specified and as directed by Engineer-in-Charge.
S & F mild steel works as in stairs / ladders (framed) including stringers, treads, landing balusters, hand rails etc including cleats brackets etc, complete all as specified and as directed by Engineer-in-Charge.
S & F framed work such as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering. doors to be prepared for hanging or sliding with including either hooks or hinges or steel hanging door fittings and fixing (exclusive of steel sheeting or covering) confirming to Fe 290 (Gde E165), complete all as specified and as directed by Engineer-in-Charge.
S & F mild steel plain sheet 1mm thick as in wall cladding, steel gates, covering to door shutters, rolling shutter covers etc and fixed to steel frames including necessary welding as required, complete all as specified and as directed by Engineer-in-Charge.
S&F three track aluminum powder coated sliding windows using two tracks for glazed window shutter and one track for wire gauged shutter including aluminum grill and provision of necessary rubber gasket fixing glass panes/ wire mesh etc. complete all as specified and directed. shown in drawing No. CE BT/SK-936R sheet 1/1. NOTE:- Glass panes & wire mesh shall be measured and paid for separately under respective item .
S&F aluminum powder coated ventilators including provision of necessary rubber gasket for fixing glass panes etc. complete all as specified and directed. shown in drawing No. CE BT/SK-936R sheet 1/1 NOTE:- Glass panes shall be measured and paid for separately under respective item.
S&F powder coated aluminium glazed door with frame of size 100 x33x2mm comprising of shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.
S & F in repairs of 18mm thick HDHMR board UV coating, exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence ,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE .
S & F in repairs of Brand Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen /Balcony Doors & Cabinets. Note: Maternal test certificate and authentication should be provided by the manufacturing company
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. NOTE:- Glass panes & wire mesh shall be measured and paid for separately under respective item .
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
BALAJI CONSTRUCTIONS
LM CONSTRUCTIONS
P K BANSAL CONTRACTOR
KRISHAN KUMAR CONTRACTOR
Lovneesh Jindal Contractor
NAIB ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .