PROVITION OF ADMISSION BAY AND GATE WITH SHEAD AT NCS (KWR), ADDN/ ALTN AND SPECIAL REPAIRS TO BUILDING NO. P-55 AND TO REPLACE OLD GI PIPE TO UPVC PIPE FOR BUILDING NO P-01 TO P-40 AT KADAMBA VANAM NAVAL BASE KARWAR

Amount

Excavating in post holes (or similar holes)Hard/dense soil each n exc 0.5 cu. M, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering complete all as specified and directed.

Material and labour PCC (1:4:8) type D-2 (using 40mm graded broken stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for plain cement concrete M 15 Grade 1:2:4 type B 1 using 20mm graded stone aggregate as in post hole/ foundation & filling in Mass concrete complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Supply and fix steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed by Engr-in-Charge.

Supply and fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe 410-W (Gde E- 250) quality 'A' including distance pieces, cleats etc.all as specified and directed by Engr-in-Charge.

Supply and fix Stainless steel 3D Dimension Letter (Height =460 mm , width= 80 mm , thickness = 50 mm )etc including all necessary fitting Required to place on granite / SS plate all as specified and directed by Engr-in-Charge.

Removing surplus soil to a distance n exc 50m and making good surface at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description exc 10cm in width or girth complete all as specified and directed.

Supply and fix Steel locking bolts with mild steel electro-galvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed.

Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls as rain water pipes all as specified and directed.

Supply and fix 110mm dia PVC (SWR) bends all as specified and directed.

Surface dressing n exc 15 cm deep in Soft/loose soil for hard standing Stage all as specified and directed.

Surface excavation of hard soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all ass specified.

Returning, filling in soil including spreading, leveling, watering and well ramming in layers n.exc. 25cm all as specified & directed.

Material and labour Moorum/red bajri filling in floors or pavings, laid in layers n exc.15 cm thick spread, leveled and rammed including watering complete all as specified and directed.

Material and labour for hardcore of broken boulders of gauge n.exc 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in CM 1:4 as in Path way complete all as specified and directed.

Material and labour Providing precast cement concrete solid building blocks masonry exc 10cm width, type C1,1:3:6 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed.

Material and labour for rendering 15mm thick plaster in CM 1:4 in two coats (10mm thick backing coat+5mm thick finishing coat) on concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and labour for providing cement concrete, 100 mm thick, type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base or sub floor etc. complete all as specified and directed.

Material and labour for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing.

Material and labour for Sand filling under floors or in foundations including watering and consolidation thickness 50mm complete all as specified.

Material and labour machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

Material and labour PCC (1:2:4) type B-0 (using 20mm graded stone aggregate) as in kerb stone etc including necessary from work and setting in CM (1:4) complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc laid over and including 15mm thick screed bed in CM 1:4 and set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

Material and labour Reinforced cement concrete for foundation including raft footing and base of the column using design mix M- 30 (20 mm graded stone aggregate)

Material and labour Reinforced cement concrete for column, pillars, piers, post and struts using design mix M-30 (20 mm graded stone aggregate)

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on Flat rough finished surfaces of concrete.

Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions on square, rectangular or polygonal rough finished surfaces of concrete

Mild steel TMT (CRS/HCRM/CRM) round bars, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking and binding with and including mild steel wire(annealed) not less than 0.9 mm dia complete

All as per item No.34 above but 5mm dia and over up to & including 10mm dia in stirrups, spacers & binders

Ornamental and intricate design framed work in steel gate of angle using 65x65x6 mm thick complete, drilled, welding for fixing of steel sheeting or other covering, hooks, hinges, or steel hanging door fitting also fastening and fixing complete.

Material and labour 20 mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polis

Material and labour 10 mm thick cement plaster 1:3 screed bed or bedding for dado / skirting complete.

Supply and fix Mild steel, plain black sheet of 3 mm in wall cladding, steel gates and similar work, cut to size, holes, punched, including round headed screws clout nails or rivets 3 mm thick complete.

Demolition of cement concrete (unreinforced) of any description and any position all as specified and directed

Demolition of cement concrete (reinforce) of any description and any position all as specified and directed

Taking down of chowkat / frames with shutter (w/o taking off shutter from frames) n.exc 1.5 Sqm each (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same)

All as per item No.42 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each.

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards /slab /blankets of any description and thickness including frame/grid of any description all as specified and directed

Demolition of Brick stone/boulder masonry built in CM, complete all as specified and directed.

Taking down cement plaster from wall surfaces of any description etc including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

All as per item No.47 above but 6mm to 8mm dia.

Material and labour for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) aggregate in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified.

Material and labour for rendering 15 mm thick in CM (1:6) on fair faces of block masonry or concrete surfaces finished even an smooth without using extra cement all as specified and directed.

Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of block masonry or concrete surfaces and finished even and smooth without using extra cement and mixed with water proofing compound @ 3% by weight of cement all as specified and directed.

Material and labour for rendering 10 mm thick in CM 1:3 on ceiling surfaces finished even an smooth without using extra cement all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

Material and labour for preparation of new plastered / decorated wall surfaces including applying a coat of 1mm thick wall care putty on new surfaces and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work including necessary safety measures as required etc complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparing newly plastered surfaces of ceiling and applying two coats of acrylic washable distemper over a coat of primer all as specified and directed.

Material and labour for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 Kg per Sqm blended with grit or pea size gravel @ 0.006 Cum per Sqm, and lightly tampered (area of flashings etc., shall be added to the roof area) complete all as specified and directed by Engr-in-Charge.

Material and labour for providing cement concrete in roof kerbs of mud stops, rounded or chamfered on edges type C1 1:3:6 using 20 mm graded crushed stone aggregate complete all as specified and directed.

Material and labour for providing 15 mm thick rendering over roof slab when concrete is green in CM 1:3 mixed with water proofing compound @ 3% by weight of cement, finished even and smooth surface without using extra cement all as specified and directed.

Supply and fix APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. Not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

Supply and fix for aluminium powder coated (minimum thickness of powder coated 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fix aluminium powder coated (minimum thickness of powder coated 50 micron) window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc complete all as specified and directed.

Supply and fix aluminium powder coated Anodised aluminium door shutters(Thickness or powder coating not less than 50 micron),aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

Supply and fix Aluminium grills of DG 104(10mm) powder coated of make Deco grill or equivalent including dismantling of old unserviceable alumiunium grill all as specified and directed

Supply and fix in repairs aluminum alloy wire cloth, 0.45 mm nominal dia of wire & average width of aperture 1.4 mm and fixed with wire staples all as specified and directed.

Supply and fix aluminum alloy wire cloth, 0.45 mm nominal dia of wire & average width of aperture 1.4 mm and fixed with wire staples all as specified and directed.

Material and labour for 4 mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed.

Supply and fix in repairs aluminium die cast body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 85 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

Material and labour for 4 mm thick figured glass, pin head type and glazing with wooden beading, not exc 0.5 Sqm in each pane all as specified and directed.

Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed by Engr-in-Charge.

Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Supply and fix Butt hinges 100 mm, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed

Supply and fix Butt hinges 125 mm, cast brass, with mild steel hinge pin, bright polished and fixed, but type C-22 complete all as specified and directed

Supply and fix Aluminium anodised, barrel tower bolts 200 mm long of extruded section and fixed all as specified and directed.

Supply and fix Aluminium anodised barrel tower bolts of extruded section 150 mm long all as specified and directed.

Supply and fix Aluminum alloy, sliding door bolt 300 mm long and not less than 12 mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

Supply and fix in repairs extruded aluminium handles, fabricated type 100mm size all as specified and directed.

Supply and fix in repairs extruded aluminium handles, fabricated type 150mm size powder coated all as specified and directed.

Supply and fix floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring and vulcanized rubber piece fixed in floor, overall length of cover plate 140 mm all as specified and directed.

Material and labour for applying one coat of Acrylic washable distemper on old decorated surfaces of wall including preparation of old surfaces including necessary safety measures as required etc complete all as specified and directed.

Material and labour for preparation of old plastered / decorated ceiling surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of Oil Bound Distemper including necessary scaffolding and safety measures as required as specified and as directed by Engr-in-Charge.

Material and labour preparing of old painted plastered surface of walls/ceiling/ chajja of any description including cornices and applying one coats of acrylic emulsion exterior grade, weather proof antifungal paint including necessary scaffolding and safety measures as required complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm in floor etc laid over and including 15 mm thick screed bed in CM 1:4 set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles in vertical surfaces 300 x 450 x 7 mm thick over and including 10 mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Supply and fix in repair vitreous china wash basin, white, flat back size 550 x 400 mm white excluding taps, waste coupling and pipe but including brackets all as specified and directed.

Supply and fix in repairs vitreous china wash down water closet (pedestal pattern) white, with plastic water closet seat & back with flat bottom and cover including fixing bolts and necessary connection with existing pipes etc complete all as specified and directed.

Supply and fix in repairs PVC valve less, syphonic action type, low level flushing cistern 10 ltr capacity, white colour with inlet ball valve, float, handle including brackets etc complete all as specified and directed.

Supply and fix in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals etc all as specified and directed.

Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

Supply and fix in repairs stop valves/ angle valve, cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15 mm bore all as specified and directed.

Supply and fix in repairs bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15 mm bore complete all as specified and directed.

Supply and fix in repairs pillar taps cast copper alloy, fancy type, chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore of complete all as specified and directed.

Supply and fix PVC connection 15 mm size with PTMT nuts of length 600 mm long all as specified and directed.

Supply and fix in repairs chromium plated toilet paper holder fancy type fixed to wall with chromium plated brass screw complete all as specified and directed.

Supply and fix in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats Minimum weight 90gms all as specified and directed.

Supply and fix in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and directed

Material and labour for Anodised Aluminium snap grid (minimum 15 microns anodisation) of size 605 x 605 mm with anodized aluminum angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg per running meter and anodized aluminum main and cross T of size 36.50 x 23.50 x 1.50 mm thick weighing 0.254 Kg per running meter and 23.50 x 23.50 x 1.50 mm thick weighing 0.202 Kg per running meter respectively for false ceiling all as specified and directed

Supply and fix hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long suitable for size of snap grid 605 x 605 mm complete all as specified and directed

Material and labour for PVC insulation panels of 10mm thickness with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing in ceiling fixed with screws on snap grid all as per manufacturer instructions.

Supply and fix 20 mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Material and labour for Sliding Door / Window 3 Track 112 series profile with 6 Glass panel of 5 mm thick clear plain glass. Sash of 42/70 series profile bead is provided to fix glass to sash. Both profile were provided with GI U shaped reinforcement. Aluminium track is fixed over 3 Track profile to slide smooth. Sash will be fixed with adjustable heavy duty roller, EPDM Gasket, Wool file and handle is connected to espag with multy point locking system. Sliding door for a height of 2500 mm. Balance 600mm height is provided with fixed frame of 60 series at the center mullion is provided as per sash design. This fixed frame is coupled to the 3 T sliding frame with I coupler all complete as per architectural drawings and the directions of Engineer-in-charge.

Taking up or down steel tubing and connections of 25mm bore including cleaning or removal to store all as specified and directed.

Taking up or down GI tubing and connections 15mm bore including cleaning or removal to store all as specified and directed.

Taking up or down GI tubing and connections 20 mm bore including cleaning or removal to store all as specified and directed.

Supply and fix 25 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc

Supply and fix 15 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc

Supply and fix 20 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc

Dismantling of PVC/ RCC water storage tank of capacity exceeding 500 litre but not exceeding 1000 litre, including removal of rubbish outside MoD land, complete all as specified.

Supply and fix Rotational moulded PVC, double layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position including tank cover, complete all as specified.

Supply & fix in replacement 25 mm dia automatic water level control float valve diaphragm attached with plunger and magnetic coupling complete all as specified and directed.

Supply and fix in repairs 25 mm bore gun metal/bronze gate valve ISI marked with iron wheel head screwed both ends for iron pipe complete all as specified and directed

Material and labour for point wiring complete with 1.5 Sqmm two single core PVC insulated, sheathed 1100volts agrade cable with stranded copper conductor FR grade conforming to IS-694 part II with ISI mark FRLS grade drawn through and including suitable size rigid non metallic PVC casing capping with all accessories, including suitable size sunk presses steel or cast iron terminal box with 3mm thick plastic laminated sheet top cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of switches, sockets, fan regulators etc including providing 1.5 Sqmm PVC insulated sheathed multistranded copper conductor cable as earth wire connected to metallic bodies of luminaries/fan etc at one end and to common earth dolly at other end all as specified for fan/light point for following equipment

All as per item no 114 above but one 3 pin socket outlet 5 amps on the same board.

Supply and fix in repair round shape LED tube light batten 20 W, 4 feet length, 2000 lm,6500 k complete with all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fix switch piano 5 amps one way flush type , all as specified and directed.

Supply and fix switch socket combination 2 in 1, 3 pin, 5 Amps flush type, ISI marked, all as specified and directed.

Material and labour for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep

Material and labour sub main wiring with proper colour coding, FRLS PVC insulated copper, sheathed, multi-stranded, copper conductor, cable of two runs, 4.00 Sqmm for phase and neutral and one run of 4.00 Sqmm for earth wire, drawn through and including PVC casing and capping with all fittings like tee, bends, junction box/terminal box fixed on wall/ground/ceiling etc and connected complete all as specified and directed by Engr-in-Charge. (Note :- Phase should be of Red/Yellow/Blue, neutral should be of black and earthing wire should be of green colour. Two run of cable for phase/neutral and one run of cable for earth will be measured and pais as one unit length).

Supply and fixing sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar double door type complete all as specified and directed.

Supply and fixing MCB SPN, 32 Amps, ''C'' series 240 Volts, single phase, 10 KA breaking capacity complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP of 6 to 32 Amps current rating complete with connection testing and commissioning complete all as specified and as directed.

Supply and Fixing of Ceiling rose, 3 phase, PVC or polycarbonate with isolated body at the locations required for fans or lights located on the ceiling 10 feet above the ground.

Supply and fix 20 watt ceiling spot white light with flexible rotatable head for display board complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for laying/taking out cable and getting out in soft/loose soil all as specified and directed.

Supply & Laying including jointing, testing and commissioning of 3 core 4 Sqmm XLPE insulated, armoured, heavy duty, LT UG electric cable with aluminum conductor 1100 volt grade including provision of lugs, glands etc laid in trenches or fixed on wall/pole or drawn through UPVC pipe complete all as specified and directed by Engineer-in-charge. Note - (i) Excavation & earth work, sand cushioning and PCC cover for cable protection will be measured & paid for separately

Supply and lay un-reinforced pre-cast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm in replacement of existing burnt bricks complete all as directed.

Material and labour for unplasticised PVC pipes of 32 mm dia fixed complete to walls, ceilings or in floors etc., with all pipe fittings such as ends, elbows, unions, tees, reducing tees, adaptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour in repair for point wiring complete with 1.5 Sqmm two single core PVC insulated, sheathed 1100volts agrade cable with stranded copper conductor FRLS grade conforming to IS-694 part II with ISI mark FRLS grade drawn through and including suitable size rigid non metallic PVC conduit concealed with all accessories, including suitable size sunk presses steel or cast iron terminal box with 3mm thick plastic laminated sheet top cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of switches, sockets, fan regulators etc including providing 1.5 Sqmm PVC insulated sheathed stranded copper conductor cable as earth wire connected to metallic bodies of luminaries/fan/bell etc at one end and to common earth dolly at other end all as specified for fan/light point

All as per item No.132 above but for One 5 Amps socket point on independent board

Material and labour for point wiring with two single core 4 Sq.mm size multistranded copper conductor PVC insulated cables and one single core 4.00 Sq.mm size green colour PVC insulated, multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including rigid PVC CONDUIT and conduit accessories, confirming to IS specifications, concealed in wall/ ceiling /trusses with suitable clamps, screws etc., including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting SOCKETS OUTLET 15 Amps multi purpose on independent board switches, sockets, fan regulators etc.,including connecting up and testing, all as specified and as directed.

Supply and fix in repair round shape LED tube light batten 20 W, 4 feet length, 2000 lm,6500 k complete with all as specified and as directed.

Supply and fix in repair 10 watt LED tube light fittings 2 feet including making necessary connection complete all as specified and directed.

Supply and fixing in repair LED luminaries 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades and Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified as directed.

Supply and fix in repairs five stepped type electronic fan regulator flush type on the existing phenol laminated sheet etc, 230 Volts single phase complete all as specified and directed.

Supply and fixing in repair LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fix in repairs switch socket combination 16 Amp, flush type, ISI marked, all as specified and directed.

Supply and fixing in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB

Supply and fix in repair of sheet metal enclosure MCB DB SPN 12 ways double door type with busbar all as specified and directed .

Material and labour in repair for sub main wiring with two runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 4.00 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 4.00 sqmm PVC insulated multistranded copper earth continuity conductor and connected to common earth dolly complete all as specified.

Material and labour in repair for sub main wiring with Four runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including two runs of 6.00 sqmm PVC insulated multistranded copper earth continuity conductor and connected to common earth dolly complete all as specified.

Supply and fix in repair of sheet metal enclosure MCB DB TPN 6 ways double door type with busbar all as specified and directed .

Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN of 16 to 32 amps current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN of 40 to 100 amps current carrying capacity in the DB complete with connection testing and commissioning.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring/Cabling, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed.

Supply & Laying in repair including jointing, testing and commissioning in repair of 3.5 core 50.00 Sqmm XLPE insulated, armoured, heavy duty, LT UG electric cable with aluminum conductor 1100 volt grade including provision of lugs, glands etc laid in trenches or fixed on wall/pole or drawn through GI pipe complete all as specified and directed by Engineer-in-charge. Note - (i) Excavation & earth work, sand cushioning and PCC cover for cable protection will be measured & paid for separately

Material and labour for unplasticised PVC pipes of 50 mm dia fixed complete to walls, ceilings or in floors etc., with all pipe fittings such as ends, elbows, unions, tees, reducing tees, adaptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks complete all as specified and directed.

Taking down old unserviceable GI tubing with all fittings from trenches, walls, floors & ceiling etc of following sizes all as directed :-

a) 40 mm bore

b) 25 mm bore

Supply and laying of UPVC pipe with all fittings for connection of pipe on walls/ceiling / floors/trench complete all as directed & specified for the following sizes :-

(a) 40 mm bore

(b) 25 mm bore

Supply and fix in repairs gun metal gate valve ISI marked with iron wheel head screwed both ends for iron pipe of 40 mm dia sizes all as specified and directed:-

Supply and fix in repairs 25mm dia float valve with PVC ball with epoxy coated alluminium rod & high density plastic ball screwed for iron pipe 25 mm dia complete all as specified & directed.

LEKSHMI ENGINEERS (BID ID -3486389)

KVL CONSTRUCTION (BID ID -3490671)