Certain repair to Bldgs of Md Accn under AGE B/R-I under GE (East) Ferozepur Cantt.

Amount

S & F 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls and ceilings or laid in floors including fitting like elbow, reducer, tee, union, nipple etc incl taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed.

All as per item above 1 herein before but 20 mm bore tubing complete all as specified and as directed.

Demolition of cement concrete in any position and pavings exc 15cm thickness complete all as specified and as directed.

M&L for laying APP based polymeric membrane 3mm thick with minimum weight not less than 3 kg/sqm, reinforced with non woven polyster fabric (wt not less than 160 gms/sqm) torching Joints/overlaps with a propane or a butane gas torch,laid with a minimum overlap of 150mm with thermo fusable finish laid/bonded over a coat of hot blown bitumen 85/[email protected]/sqm,over forced application bitumen primer @0.30 litres per sqm,including preparation of plastered surfaces of Sunken portion ,complete all as specified and as directed.

M & L rendering 10mm plaster in CM(1:3) finished even and smooth with using extra cement on vertical surface of sunken portion wall and floor with water proofing compound (in case of re placement of bottom layer tile) complete all as specified and as directed.(WPC shall be measured separately)

Supply only integral water proofing compound complete all as specified.

S&F PVC (SWR) pipes 40 mm bore including fixing to walls as in spouts of sunken portion complete all as specified and as directed.

M & L Cement concrete (1:5:10),type E-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and as directed.

M & L for pcc (1:3:6) type C2 (20mm graded stone aggregate) 50mm thick as in plinth protection complete all as specified and as directed.

M & L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm garded stone aggregate for floor finish without using extra cement complete all as specified and as directed.

M & L Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, using WPC, surfaces finished even and fair without using extra cement including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L Rendering/plastering, 12 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished even and fair without using extra cement including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L Rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for applying two coats of Cement base paint on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

M & L for applying three coats of White wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed.

M&L for applying two coats of Washable Distamper/ Economy Emulsion on newly plastered wall including preparation of surfaces complete all as specified and as directed.

M & L for applying White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M & L for applying two coat of Washable Distamper/ Economy Emulsion on old surfaces of wall including preparation of surface complete all as specified and as directed.

M & L for applying two coats of white wash on old Ceiling surface including preparation of surface complete all as specified and as directed.

M & L for applying two coat of Cement base paint over old plastered or unplastered surface of walls including preparation of surfaces complete all as specified and as directed.

M & L for applying two coat of white wash over old plastered or unplastered surface of walls including preparation of surfaces complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches including dismantling CI pipe/any type alongwith fittings of 75/100mm dia, below or above ground level, jointed in cement mortar and taking out complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches including dismantling CI pipe/any type alongwith fittings of 75/100mm dia, below or above ground level, jointed in cement mortar and taking out complete all as specified and as directed.

S&F PVC (SWR) bend (any radius), 110mm bore, diminishing pieces or tapers (larger bore measured) jointed in cement mortar complete all as specified and as directed.

All as per item 24 above here-in-before but 75mm bore complete all as specified and as directed.

S & F PVC (SWR), floor trap, 75mm bore, Plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F PVC (SWR) junction single, (single T) equal or unequal 110 mm complete all as specified and as directed.

S&F PVC rain water pipes 100mm bore including fixing to walls with MS clamps incl taking down eaves gutters and rain water pipes( any size or pattern), including all fittings heads shoes bends swan-necks etc complete all as specified and as directed.

S&F Water storage tanks 1000 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank complete all as specified and as directed.

S&F Water storage tanks 500 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank complete all as specified and as directed.

S & F in repair Ball valve of PVC, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule, complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.50 Sqm each including cutting holes of appropriate size for insertion blocks of cement concrete for hold fasts complete all as specified and as directed.

All as per item No 32 here-in-before but size exceeding 1.5 Sqm & not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutter of any description exe 1 sqm and not exc 2 Sqm complete all as specified and as directed.

M & L Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and as directed.

M & L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in bed blocks of hold fasts, coping etc including necessary form work complete all as specified and as directed.

S&F 30mm thick, Flush shutters, solid core construction, with partical board core, commercial type on both sides,one face is covered with deco rative face veneer with lipping/frame to match complete all as specified and as directed.

S&F 35mm thick, 2nd class hard wood (Hollock), glazed and skelton shutters, open rebated and prepared to receive glass/ gauge etc divided in to squares with plain rounded mitered and rebated sash bars any numbers, fitted with cut and mitered beads for securing glass etc size of members as specified in clause 8.24 (a) of MES Schedule Part-I in Section-8, complete all as specified and as directed.

S & F Pressed handle of mild steel, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified and as directed.

S & F butt hinges, 100 mm long of mild steel, medium weight, cold rolled complete all as specified and as directed.

S & F Barrel tower bolts of mild steel, stove enameled black, with bright bolt, 200 mm long and fixed with steel screws complete all as specified and as directed.

S & F Sliding door bolts of mild steel, 300mm long, stove enameled black with bright bolt not less than 12mm dia with & including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 300 mm Mild steel helical door spring including roller and roller plate complete all as specified and as directed.

M & L Painting to new wooden or wood based surfaces of any description, over 10cm width or girth in two coats with synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

M & L Preparation of old treated wooden surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M & L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

M & L solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site complete all as specified and as directed in clause 8 B.2.1 of MES schedule Part-II (2004). Make: Rajshri or equivalent as approved.

S & F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and as directed.

S & F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and as directed.

S & F PTMT handle 125mm long fixed with steel screws complete all as specified and as directed.

S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and as directed.

S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified , including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and as directed.

S & F Mild steel, fixed type ventilaters with side hunge shutters including projecting type hinges with steel handle and steel peg stay, complete with sash bars, dovetailed or welded complete all as specified and as directed.

Hacking out old broken glass n. exe 1.5 SQM (any thickness size, quality of description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

S & F Plain sheet glass 3mm thick, ordinary quality and glazing, fixed with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and as directed.

S & F Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S & F in repair Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

M & L Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and as directed.

Preparation of old treated steel surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

S&F non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), including dismantling floor, hearth or wall tiling including cement mortar beding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6),incl dismantling floor, hearth or wall tiling including cement mortar beding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

All as per item No 62 here-in-before but skirting over and including screed bedding 10 mm thick in CM (1:4) complete all as specified and as directed.

M & L Glazed Ceramic coloured tiles in vertical surface 350 x 250 x 7mm/450 x 300 x 7 mm thick primium quality over and incl 10 mm thick rendering in CM 1:4 on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles including dismantling floor, hearth or wall tiling including cement mortar beding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

Demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortar complete all as specified and directed.

M&L machine cut kota stone flooring 18-20 mm thick over & including 20mm thick screed bed in cement mortar 1:6, laid jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L machine cut kota stone 16-18 mm thick as in risers of steps, skirting, dado etc over & including 15mm thick rendering in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M & L for Granite (of any type) 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

S & F CI Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as specified and as directed.

S & F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as specified and as directed.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and as directed.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and as directed.

M&L All as per item 71 above here-in-before but using old bricks retrieved from demolition under item above here-in-before including cleaning and removal of mortar from old bricks complete all as specified and as directed.

M&L Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified and as directed.

S & F in repair Bib tap of cast copper alloy chromium plated, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repair Stop valve of cast copper alloy chromium plated, 15mm bore, screwed down, high pressure with crutch or butter fly handle complete all as specified and as directed.

S & F in repair Pillar tap of cast copper alloy chromium plated, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repair stop valve, bore dia 15 mm of PTMT any colour high pressure screwed for iron pipe and fixed. (minimum weight 15 mm -90 gms/ 20 mm-92 gms) complete all as specified and as directed.

S &F in repair Bib tap, 15 mm of PTMT any colour screwed, for iron pipe and fixed (minimum wt 15mm-90 gms/20mm-125gms) complete all as specified and as directed.

S&F in repair Pillar tap standard of PTMT any colour, fancy type, high pressure screwed for iron ppe and fixed as in repairs (Minimum weight 120 gms) complete all as specified and as directed.

S & F as in repair PTMT shower Rose swivel type 125 mm size (minimum wt 40 gram) complete all as specified and as directed.

S & F in repair Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing complete all as specified and as directed.

S & F in repair Vitreous China wash down water closet pan (pedestral pattern), White (excluding fixing bolts, flushing cistern and flush pipe), with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repair PVC waste pipe of 32 mm dia for Wash Hand basin/Urinals etc complete all as specified and as directed.

S & F in repairs Squatting pan orrissa pattern vitreous china white of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore sand cast cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints etc complete all as specified and as directed.

S & F in repair corner glass shelves 300 mm radius 8 mm thick as per sample radius for bathroom, fixed on suitable support of brass chromium plated clips complete all as specified and directed.

S & F in repairs low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories and connecting to water pipe and EWC etc and fixed complete all as specified and as directed.

S & F in repair towel rail 450 mm long of Brass Chromium plated 20 mm dia fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 170 gms) complete all as specified and as directed.

S & F in repair PVC connection 15 mm size PTMT nuts of length 450 mm fixed complete all as specified and as directed.

S&F in repair flush pointing to bricks laid flat or brick tiles in pavings in floor,roof,apron etc in CM(1:3) including raking out joints/pointing to brickwork or bricktiles laid flat, in floors, surface channels, roofs etc laid in cement or cement mortar complete all as specified and as directed.

M&L Mild steel curtain rod PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and as directed.

M&L Pre-laminated particle board, 18/19mm thick interior grade, having one side decorative lamination (approved shade) and other side balancing white lamination fixed in pelmet boxes, shelves, including Hasp & Staple, Piano hinges rebated or flat edges including 6 mm thick teak wood leaping all-round and fixed as in repairs including Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed.

S&F in repair stainless steel sinks 1 mm thick kitchen or laboratory with plugs, washers, CP coupling and including bedding in cement mortar fixed in RCC cooking platform including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420mm & bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

M&L Factory made 60mm thick pre-cast coloured interlocking tiles PCC (M-35 Nominal Mix) over 25mm thick layer fine sand and grouted with dry sand over complete all as specified and as directed.

M & L for formwork to chullah, hooks, chajjas, troughs and similar work including edges complete all as specified and as directed.

M & L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in chajja, supported on walls, beams, roofs, landing, bolconies, canopies and in shelves and like complete all as specified and as directed.

M&L of TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia and including necessary welding to existing reinforcement where required complete all as specified and as directed. (Note: weight of binding wire shall not be considered for measurement and payment purpose).

S & F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L of TMT bars 6 to 8 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia and including necessary welding to existing reinforcement where required complete all as specified and as directed. (Note: weight of binding wire shall not be considered for measurement and payment purpose).

M/S Sandhu Const.Co.

PREM KUMAR BANSAL

Easyways Enterprises

M/s Sidhu Bros