Estimate for construction of Escape at RD 19800 of Kanganwal Disty. crossing Drain

Amount

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.

Weaving wire netting for wire crates including binding sides and partitions to make crate of 15 cm x 15 cm or 25 cm x 7.5 cm mesh.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Cement concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring. D.I. Pipe as per IS 8329 DI-K7 600mm i/d pipe lines laid complete

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).Class PN-1 as per ISI 600mm i/d Sluice Valves flanged

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.Size 0.9 m. x 0.9 m.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Nuts & Bolts of all sizes and length required

DI F/SPIGOT TAIL PC(Providing and Fixing)

DI D/SKT BEND 600 X 22.5 Degree (Providing and Fixing)

DI D/SKT BEND 600 X 45 Degree (Providing and Fixing)

TYTON RING (Providing and Fixing)

1)Filling stones or spalls into packing (csr 23.32) 2) Supply and Carriage of boul specifications.(Aor) 3) Tipping of wire crates including equipment

Any Other Items

SATPAL CONTRACTOR (BID ID -595858)