Repair to internal water supply and plumbing under GE (North) Bikaner at Mil Stn Bikaner.

Amount

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick or conc surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling PVC/cast iron pipes fixed to walls or laid in trenches in any position complete all as specified and as directed by Engineer-in-Charge.

Dismantling structural steel any description including door steel gates etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantling under 40 sqcm in section complete all as specified and as directed by Engineer-in-Charge.

Dismantling existing tanks, setting aside (or lowering if required)for repairs , cleaning ete. And hoisting if requeired reconnecting and refixing in position of capacity n.execeeding 300 ltrs and removing to stores, complete all as specified and as directed by Engineer-in-Charge.

Dismantling existing tanks, setting aside (or lowering if required)for repairs , cleaning ete. And hoisting if requeired reconnecting and refixing in position of capacity execeeding 300 Ltrs and not exceeding 500 litres and removing to stores, complete all as specified and as directed by Engineer-in-Charge.

Dismantling existing tanks, setting aside (or lowering if required)for repairs , cleaning ete. And hoisting if requeired reconnecting and refixing in position of capacity execeeding 500 ltrs and not exceeding 1000 litres and removing to stores, complete all as specified and as directed by Engineer-in-Charge.

Dismantling Stone slabs and tiles of any description or thickness in roof ,floors, aprons laid in cement mortar etc, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections,15mm bore including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

S&F PVC tank lid for 500 ltrs capacity including all locking arrandements , nuts bolts etc for fixing complete all as specified and as directed by Engineer-in-Charge.

S&F PVC tank lid for 1000 ltrs capacity including all locking arrandements , nuts bolts etc for fixing comcomplete all as specified and as directed by Engineer-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, including disinfecting with bleaching powder etc.removing all scale and dirt etc from tanks and from mouths of circulating pipes and hoisting if required reconnecting and re-fixing in position including writing "date of cleaning" and next due date in bold capital letters exc 4 cm in height ,capacity of tanks exc. 250 Ltrs but not exc. 500 Ltrs complete all as specified and directed by Engr-in-charge) (Date of cleaning has to be marked)

All as per SI No14.00 here-in-before but capacity of tanks 1000 ltrs complete all as specified and as directed by Engineer-in-Charge.

M & L for repairing PVC tank of any capacity by stitching with adhesive or patching with old PVC tank material by flamming over cracked surfaces and over lapping with self adhesive membrane preferred material or any other method to make leak proof of PVC tank as directed by Engineer-in charge.

M & L PCC (1:2:4) in Precast in bed Block for supporting delivering pipe of PVC tanks. ( Note:- Block shall be precasted of suitable size and placed as different location where requirement by Engineer-in-Charge.

Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 300 litres including all accessories,complete all as specified and as directed by Engineer-in-Charge. (Note : (i) Tank shall be provided only having Cover to tank shall be of Thread mode. (ii) Make shall be embossed on PVC tank and test certificate shall be provided before claiming payment )

Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories, complete all as specified and as directed by Engineer-in-Charge. (Note : Make shall be Engraved and test certificate shall be provided before submitting payment )

Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres including all accessories, complete all as specified and as directed by Engineer-in-Charge.(Note : Make shall be Engraved and test certificate shall be provided before submitting payment )

S&F GI Tee 15 bore as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F GI Tee 20 bore as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F GI Elbow 15 mm bore as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F GI Elbow 20 mm bore as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F GI Socket 15 mm bore as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F GI Socket 20 mm bore as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F GI tank nipple 20 mm bore with & incl check nut as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F GI union 15 mm bore as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F GI union 20 mm bore as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F PVC Plugs 15 mm complete all as specified and as directed by Engineer-in-Charge.

S&F PVC plugs 20 mm complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenches complete all as specified and as directed by Engineer-in-Charge.

Ditto- as per Ser Item No 32.00 but fixing only complete all as specified and as directed by Engineer-in-Charge. ( The old serviceable GI pipes retrived from SI No 10.00 shall be used under this items in new or Old position with fittings)

M&L for 20 mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenches complete all as specified and as directed by Engineer-in-Charge.

Ditto- as per Ser Item No 34.00 but fixing only complete all as specified and as directed by Engineer-in-Charge. ( The old serviceable GI pipes retrived from SI No 11.00 shall be used under this items in new or Old position with fittings)

M&L for 20 mm bore cutting existing steel tubing for alteration or addition (Each cut to be measured seperately) complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair 15mm bore stop cock cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair 20 mm bore stop cockcast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair 15 mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair 20 mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair 15 mm bore PTMT valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-Charge. (Make :Prayag /equivalent approved make)

S&F as in repair 20 mm bore PTMT valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-Charge. (Make :Prayag /equivalent approved make)

S&F in repair Gun metal, globe or gate valve 15 mm bore with iron wheel head, screwed both ends for iorn pipe and if reqd cutting to be made in running pipe for fixing of gate valve complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Gun metal, globe or gate valve 20 mm bore with iron wheel head, screwed both ends for iorn pipe and if reqd cutting to be made in running pipe for fixing of gate valve complete all as specified and as directed by Engineer-in-Charge.

Sensor for urinals fixed as in repairs complete all as specified and as directed by Engineer-in-Charge. ( Make : Hindware , CERA, Perryware)

S&F110mm bore PVC (SWR) pipe single socketed , in any length with rubber joints fixed to walls complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm bore PVC (SWR) pipe bends any radius complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber joints fixed to walls complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) pipe bends any radius complete all as specified and as directed by Engineer-in-Charge.

S&F 75 mm bore PVC (SWR)) floor traps plian with grating incl jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.

M&L brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:4 all as specified complete all as specified and as directed by Engineer-in-Charge.

Jodhpur stone of roof slabs, self faced 7.5 cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for 40 mm thick flooring type, B-1 ,(1:2:4:) , using 20 mm graded crushed stone aggregate ,finished the surface even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L For PCC type B1(1:2:4) using 20 mm graded crushed stone agg as in coping ,benching and the like incl form work, complete all as specified and as directed by Engineer-in-Charge.

M&L for cutting parapets walls ,kerbs or any arrangement at roof slab for providing spout of minimum 40 mm bore GI pipe and minimum length 1.00 mtr complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 15mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:4,even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid intigral water proofing compound, ISI marked complete all as specified and as directed by Engineer-in-Charge.

M&L for applying two coats of cement based paint over a coat of alkali resistence priming paint after preparation of new or old untreated plastered surfaces complete all as specified and as directed by Engineer-in-Charge.

Racking out joints /pointing to brick work or brick tiles laid flat in floors surface channels roofs etc laid in cement mortar complete all as specified and as directed by Engineer-in-Charge.

M&L for flush pointing in cement mortar 1:4 laid flat or brick tiles in paving etc, complete all as specified and as directed by Engineer-in-Charge.

Providing cement concerete PCC 1:2:4 type B0 (12.5mm graded stone agg) in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and as directed by Engineer-in-Charge.

S&F for framed work as in grills gratings / tank covers made up of steel plate and band fitted with sharp edged flat iron horns etc ends of bars shouldered or forged in to spikes etc conforming to Fe 290.Gde 165 complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation etc or for laying of cables, pipes etc and getting out in soft/loose soil completed all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil completed all as specified and directed by Engineer-in-Charge

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point completed all as specified and directed by Engineer-in-Charge

M&L for cutting/dismantling of PCC hardstanding / WBM road with soling & premix carpet of any description for repair/replacement of water supply pipe lines and disposal of debris & rubbish to a distance exc 250m but not exc 500m and making good the same with & including plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as existing depth complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50 mm bore for GI pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 80 mm bore for GI pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 100 mm bore for GI pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed. (Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.)

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed. (Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.)

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed. (Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.)

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 40mm bore, complete all as specified and directed. (Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.)

M&L for galvanized steel water tubing medium grade of 50mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 50mm bore, complete all as specified and directed. (Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.)

M&L for galvanized steel water tubing medium grade of 80mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 50mm bore, complete all as specified and as directed. (Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.)

Supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 40 to 80mm bore GI/DI water pipe line including drilling and welding of 15/20mm GI socket and necessary rubber insertion, nut, bolts & washers complete all as directed.

S&F 15mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 15mm bore, complete, all as specified & directed.

S&F 20mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20mm bore, complete, all as specified & directed.

S&F 25mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 25mm bore, complete all as specified & as directed.

S&F 40mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 40 mm bore, complete all as specified & directed.

S&F 50mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 50 mm bore, complete, all as specified & as directed.

Supply & fix or laying CPVC pipes SDR 11 & plain CPVC SDR11 fittings in trenches or on wall or roof of 50 mm bore dia complete all as specified by Engineer -in charge.

Supply & fix or laying CPVC schedule 80 pipes & plain CPVC shedule 80 fittings in trenches or on wall or roof of 62.5 mm bore dia complete all as specified by Engineer -in charge.

Supply & fix or laying CPVC schedule 80 pipes & plain CPVC shedule 80 fittings in trenches or on wall or roof of 75 mm bore dia complete all as specified by Engineer -in charge.

Supply & fix or laying CPVC schedule 80 pipes & plain CPVC shedule 80 fittings in trenches or on wall or roof of 100 mm bore dia complete all as specified by Engineer -in charge.

S&F stop valves cast copper alloy screwed down ,high pressure ,with cruch or butterfly handle ,screwed both side ends for iron pipes or for unions of size 15 mm bore complete all as spoecified and directed.

S&F stop valves cast copper alloy screwed down ,high pressure ,with cruch or butterfly handle ,screwed both side ends for iron pipes or for unions of size 20 mm bore complete all as spoecified and as directed.

S&F stop valves cast copper alloy screwed down ,high pressure ,with cruch or butterfly handle ,screwed both side ends for iron pipes or for unions of size 25mm bore complete all as spoecified and as directed.

S&F ball brass valve high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and as directed.

S&F ball brass valve high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule of size 25 mm bore complete all as specified and directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 150 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for galvanized steel water tubing medium grade of 100mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 100mm bore, complete all as specified and as directed. (Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.)

M&L for galvanized steel water tubing medium grade of 150mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 150mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 100 to 150mm bore GI/DI water pipe line including drilling and welding of 15/20mm GI socket and necessary rubber insertion, nut, bolts & washers complete all as directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 150 mm bore, complete all as specified & as directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 150 mm bore, complete all as specified & as directed.

GS BUILDERS AND ENGINEERS

BIDAWAT ENTERPRISES