INTERNAL PERIODICAL SERVICES INCLUDING REPAIR TO JOINER, FLOORING, TILLING, SANITARY FITTINGS ETC NAIDU JJ, RODRIGIOUS COLONY OLD GUPTA, DUTTA AND BHARGAVA COLONY AT AF STN UTARLAI

Taking down frames with shutters (without taking off shutters from the frame ) area exc 1.5 Sqm but n.exc 4 sqm mtr each incl iron mongery complete.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each for resecuring or easing & adjusting and refixing in same opening complete all as spcified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each and removing to store complete all as spcified and as directed.

S&F pressed steel frames of size 105 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc. including a coat of zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

S&F pressed steel frames of size 125 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc. including a coat of zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified and directed by Engineer - in - Charge.

S&F 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of vennered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified & directed by Engineer-in-Charge.

S&F 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, sizes of members of shutters as specified in SSR Part I. (2st class haed wood). complete all as specified & directed by Engineer-in-Charge

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkats complete all as specified & directed by Engineer-in-Charge.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed complete.

S&F 200 mm long, aluminum anodised barrel tower bolts of extruded section complete as specified.

S&F 150mm long aluminum alloy handles, anodized complete as specified.

S&F 250mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast-aluminium alloy.

S&F for Aluminium door stopper of any descripion all as specified and directed by Engineer-in-charge.

S&F in repair for mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete.

S & F drapery curtain rod, mild steel, rubber moulded 25mm dia with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge .

M&L for preparation of new or untreated wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed by Engineer-in-Charge.

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete.

S&F PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. Complete all as specified and directed by Engineer-in-Charge.

S&F Butt hinges 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised .

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads up to G+2 height bldg complete all as specified.

S&F for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane or fixed in alum door/window shutter cut to required size and fixed with PVC/Neopane gasket etc. (upto G+2 height of bldg) complete all as as specified and directed. (Aluminium snap beading shall be paid separately)

S&F 3 mm thick figured glass pin headed and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer - in-Charge.

S&F 4mm thick sheet glass ordinary quality, fixed in alum door/window shutter cut to required size and fixed with PVC/Neopane gasket etc. complete all as as specified and directed. (Aluminium snap beading shall be paid separately)

S&F powder coated (thickness or powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing/sliding etc. complete all as specified and directed by Engineer-in-Charge.

S&F powder coated (thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) Complete all as specified and directed by Engineer-in-Charge.

M&L powder coated (thickness or powder coating not less than 50 micron) anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, Complete all as specified and directed by Engineer-in-Charge.

Dismantling of boarding, any description, fixed in position with nails

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F 18mm thick PVC sheet having one side decorative laminated sheet all required brackets SS screws etc. the panel shall be fabricated using adhesive and screws where ever required.all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification as directed by Engineer -in-Charge.

S & F Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer - in-Charge.

S & F continous (Piano) type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as spd and directed.

S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge.

S&F 12 mm thick veneered decorative plywood with laminate both side,, ISI marked as in cupboard shutter/shelves, one side with decorative choice lamination and other side balancing white lamination including 6mm thick teak wood liping, including timber frame of suitable size fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.

S&F door seal bottom with carbon metal seal strip and rubber insulation weather proof, sound proof, anti rust for all door types with carbon screws complete all as specified & directed by Engineer-in-Charge.

M&L for running welding in repairs thickness of metal to be welded is n exc. 6mm complete all as specified.

Demolition of pcc block/brick work or stone masonry, built in cement mortar, complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete.

Taking down cement plaster of any description on bricks, concrete or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on concrete surface or brick work finished even and smooth with out using extra cement similar work up to 12 mtr height of the bldg complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5mm thick in CM (1:3) on concrete surface such as roof projection, chajja, fin and similar work incl. ceiling up to 12 mtr height of the bldg, finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm in CM 1:4 thick on stone masonry surfaces or surface other than fair face of brick-work finished even and smooth without using extra cement similar work up to 12 mtr height of the bldg complete all as specified and directed by Engineer-in-Charge.

M&L for prepration of new plastered wall surfaces and applying two coat of oil bound distemper over one coat of interior wall primer over a coat of wall care putty complete all as specified & directed by Engineer-in-Charge

M&L for prepration of new plastered wall surfaces and applying two coats of acrylic smooth exterior weather coat paint @ 1.67 ltr/10 Sqm over one coat of exterior primer @ 2.20 Kg/10 Sqm (upto 12 mtr height of the bldg) complete all as specified and directed by Engineer-in-Charge.

M&L for prepration on new plastered ceiling surfaces and applying three coats of white wash (upto 12 mtr height of the bldg) complete all as specified & directed by Engineer-in-Charge

M&L for preparation of old distempered wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying a coat of distemper oil emulsion any tinted complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treeatment and applying two coats of oil bound distemper on wall surface over a coat of 1.5 mm thick wall care putty complete all as specified and directed by Engineer-in-Charge.

M&L for preparation on old plastered surfaces of walls & applying one coat of white wash complete all as specified and directed by Engr-in-charge.

M&L for preparation on old plastered surfaces of walls & applying two coats of white wash complete all as specified and directed by Engr-in-charge.

M&L for preparation on old plastered surfaces of ceiling & applying one coat of white wash (upto 12 mtr height of bldg) complete all as specified and directed by Engr-in-charge.

M&L for preparation on old plaster surface of walls & applying one coat of cement base paint (up to 12 mtr height of bldg) complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick ( square/rectangular) in any shade area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors, skirting and similar work etc over screed bed or bedding layer 15mm thick in CM (1:4), set and jointed in neat cement slurry and pointed white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick ( square/rectangular) in any shade are of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors, skirting and similar work etc over screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed white or coloured cement to match. Complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified ceramic tiles (light shade) 10mm thick ( square/rectangular) polished in any shade, area of each tiles not exceeding 0.36 sqm, in floors, skirting and similar work etc, screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed cement to match. Complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick in CM (1:4) as in backing coat, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for coloured glazed ceramic coloured tiles (300X200mm)X7mm in vertical surface set and jointed in neat cement slurry and pointed with white/coloured cement to match the surface comp Complete all as specified and directed by Engineer-in-Charge.

M&L for coloured glazed ceramic tiles 350x250x7mm/450x350x7mm 7-8mm thick in vertical surface set and jointed in neat cement slurry and pointed with white/coloured cement to match the surface Complete all as specified and directed by Engineer-in-Charge.

M&L for renewing ceramic tiles in patches (any type, size & colour), area n exc 5sqm incl removing and cleaning old tiles, preparing bedds and laying or setting, jointing and pointing new or old tiles as in floors, skirting, dado and similar work etc, over screed bed or bedding layer 10mm thick in CM(1:4), set and jointed in neat cement slurry and pointed in any shade cement to match complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.

M&L for 20-25 mm thick machine cut kota stone slab flooring over screed bed or bedding layer 20mm thick in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed by Engineer-in-Charge.

M&L for 16 to 20 mm thick granite (of any type) work (table rubbed and polished) of shade as approved as in steps, jambs, pillars, window cills , cooking platforms, wall clading and similar work in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite, over screed bed or bedding layer 20mm thick in CM(1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors or pavings n. exc. 15 cm thick (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggr) as in level course finished even and rough with out using extra cement complete all as specified and directed.

M&L for 40 mm thick cement concrete (1:2:4) type B1 using 20mm graded aggregate finished even and smooth with using extra cement all as specified and directed .

M&L glass dividing strips, 3mm thick, width of strip 38mm and inserted in position to conform to design complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick cement concrete (1:3:6) type C2 using 20mm graded stone aggregate as in paving/plinth protection incl. bitumen filler/mastic filling in joints complete all as specified and directed by Engineer-in-Charge.

S&F for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 Complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks of capacity exc. 250 and n exc. 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. from water tanks of capacity exc. 250 and n exc. 500 ltrs incl. writing date of cleaning of tank in DD-MM-YY format complete all as specified and as directed.

S&F in repair for 500 litres capacity rotational moulded white colour polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe including taking down old water tank complete as specified and directed by Engr-in-charge.

S&F in repair for 1000 litres capacity rotational moulded white colour polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe all as specified in SSR Part I. Complete as specified and directed by Engr-in-charge.

S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and as directed.

S&F in repair for galvanised iron steel water tubing 15mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors incl taking up or down existing steel water tubing alongwith connection fixed/laid in any situation.Complete as specified and directed by Engr-in-charge.

S&F in repair for galvanised iron steel water tubing 20mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors incl taking up or down existing steel water tubing alongwith connection fixed/laid in any situation.Complete as specified and directed by Engr-in-charge.

S & F in repair brass chromium plated central hole basin mixer with regular spout , popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed.

S&F in repair sink mixer with swinging spout (wall mounted model) chromium plated brass with connection and nut complete all as specified and directed.

S & F in repairs brass chromium plated wall mixer with non telephonic shower arrangement for mixing hot and cold water screwed down for iron pipe and fixed as directed.

S&F in repair 15mm bore brass CP extension nipple 25mm long suitable for taps/valves and fixed all as specified

S&F in repairs 15 mm bore bib tap long body fancy type chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe all as specified.

S & F in repairs 15mm bore CP Angle cock chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified .

S&F in repairs 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repairs pillar taps 15mm bore fancy type chromium plated cast copper alloy with capstan heads scre-wed down high pressure with or without lettered hot' or'cold' with long screwed shanks and fly nuts screwed for iron pipe . ISI marked.

S&F in repair only brass spindle suitable for bib cock / angle cock / pillar cock / concealed stop cock as per sample approved by GE.

S&F in repair brass chromium plated water tap handle or knob of specification and make as required at site and as directed by Engr-in-charge.

S&F in repair CP grating suitable for 75/100 mm bore floor trap and fixed with white cement.

S&F in repair PVC connection both side brass unions internal for size 15mm dia and 600mm long all as specified and directed by Engineer-in-Charge.

S&F PVC waste pipe 32mm dia & 90 cm long all as specified and directed by Engineer-in-Charge

S&F in repair PVC corner shelf assembly fancy type size 300x300mm fixed with 'F' or 'D' type brass CP brackets complete all as specified.

S & F in repair towel rails 20 mm dia, D type , 60 cm long superior quality brass chromium plated fancy type Complete all as specified fixed in repairs.

S&F in repair for brass chromium plated shower rose 125 x 125 mm size with swivel joint and shower arm including fixing to 15 mm dia steel pipe or union.

S&F in repairs soap dish,chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed.

S&F in repair Viterous China squating pan "ORISSA" pattern size 580MMX440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, seat cover complete.

S&F in repair PVC low level flushing cistern 10 Ltr capacity with 10 ltr discharge option flush pipe complete as approved by Eng-in charge.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair EWC Jet spray mild steel chromium plated suitable for 15 mm dia pipe including making connections and fixed in position complete in all respect as specified.

S&F in repair plastic water closet seat, white closed patern with flat bottom and cover and mild steelcromium plated or aluminium hinging device complete all as specified.

S&F in repair vitreous china,white wash hand basin ,pedestal type, flat back size 550x400mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel kitchen sink 1.00mm thick with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed.

S&F in repairs stainless steel kitchen sink 1.00mm thick for kitchen or laboratory with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc. overall size 495x420mm and bowl size 410x330x160mm including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed.

Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge .

Dismantling of CI pipes or reinforced concrete pipes 100 mm dia fixed to wall or in floors etc complete all as specified and directed.

Dismantling of CI pipes or reinforced concrete pipes 75 mm dia fixed to wall or in floors etc complete all as specified and directed.

S & F 110mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F 75mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F 75mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 100mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 75mm cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door fixed to pipe complete all as specified and directed.

S&F 100mm cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door fixed to pipe complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (double T) equal or unequal provided with access door complete all as specified and directed.

S&F 100mm PVC (SWR) junction single, (double T) equal or unequal provided with access door complete all as specified and directed.

S&F 75mm PVC (SWR) vent cowl fixed in position complete all as specified and directed.

S&F 100mm PVC (SWR) vent cowl fixed in position complete all as specified and directed.

S&F 75mm PVC(SWR) bends provided with access door any radius complete all as specified and directed.

S&F 110mm PVC(SWR) bends provided with access door any radius complete all as specified and directed.

S&F 75mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) floor trap 100/75 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 complete all as specified.

S&F PVC stack clamps of suitable for 75mm and 110mm bore pipes fixed to walls including bolts and nuts and securing ends of stays completeall as specified and directed.

Please Enable Macros to View BoQ information