SR TO RB TYPE VI SECTOR 16, CHANDIGARH (H. No. 282 AND OTHERS).

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing 40mm thick PUF celling Panels continuous line sandwich with 0.40 mm thick TCT PPGI (120 gm, 240 mpa coated sheet of make JSW. Satmax. Lloyd, sintex, Mectec, Rinac (Conforming to IS: 12436) on both side having polyurethane foam of density 40± 2kg/cum between sheets. The panel sheet shall have corrugated sheet at top having crest of approx 30mm and the bottom shall be plane sheet with ribs. The panel sheets have one meter width and panel length as per length of room without any joint. The panel shall be fixed in tongue and groove joint with help of flashing comprising of PPGI U channels, L- section, end cap, POP revits, screws and other accessories complete in all respect. The PUF shall be CFC free and ozone friendly made with blowing agent will be N- Pantene. The gap at joint shall be filled with silicon sealant of approved brand (Macoy, pidilite or its equivalent). These panels shall be fixed in alignment and plumb complete in all respect to the entire satisfaction to the Engineer in charge

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing 6mm thick polycarbonate multi wall sheet to be fixed on existing M.S. frame with Aluminum rivets complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing top aluminium profile with rubber gasket to seal the joint of polycarbonate sheet with self drilling screws etc complete fixed in all respects to the entire satisfaction of Engineer-in-charge.