PROVISION OF WEATHER PROOF PAINT IN CERTAIN OMQS AT NORTH CAMP AND OTHER SANCTION WORK UNDER GE (AF) BAMRAULI

Amount

Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified as directed.

M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.

M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.

M&L for Rendering 5mm thick in CM 1:3 on celing, finished even and smooth without using extra cement complete all as specified as directed.

M&L for Taking down cement plaster any description on brick or concrete walls, etc including raking out joints, hacking for key scrubbing down with water etc Rendering 15mm thick in two layars of 10+5 mm in CM 1:4 mixing with pidi Proof 101 LW (+) of Dr fixit or equivalant integral water proofing admixture @200ml/bag over two coats of super latex 302 of dr fixit or equivalent in the ratio (1:4:7),(one part super latex,4part water and 7 parts of cement ) @ 1.5 kg of homogenious mixture/ Sqm in two coats and finish the surface even and smooth with out using extra cement ) for external walls complete as per specification and directed ( Pidi proof and super latex to be measured and paid separately)

M&L for Taking down cement plaster any description on brick or concrete walls, etc including raking out joints, hacking for key scrubbing down with water etc Rendering 15mm thick in CM 1:6 mixing with pidi Proof 101 LW (+) of Dr fixit or equivalant integral water proofing admixture @200ml/bag over two coats of super latex 302 of Dr fixit or equivalent in the ratio (1:4:7),(one part super latex, 4part water and 7 parts of cement ) @ 1.5 kg of homogenious mixture/ Sqm in two coats and finish the surface even and smooth with out using extra cement ) for walls complete as per specification and directed ( Pidi proof and super latex to be measured and paid separately)

Supply only Pidi proof 101 LW(+)

Supply only Super latex 302

M&L for Complete removing of existing treatment on wall /roof projection including facia, cornices etc by scraping with mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust,loose paint etc by skilled labour complete all as specified and directed. Work shall be carried out by mechnical means.

M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting. Complete work shall be carried out by mechnical means.

M&L for applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gmLtr and UV resistance as per IS 15489:2004,Alkali & fungal resistant dirt resistance exterior paint of required shed (Company Depot Tinted ) with silicon additives @ 1.43 Litre /10 sqm over and including priming coat of exterior primer appied @ 0.90Litre /10sqm . Note- Work shall be carried out throught air less spray machine (Mechanical means).

M&L for preparation of new wall surfaces of wall and applying two coat oil bound distemper over 1.5mm thick wall putty over a coat of alkali resistant cement primer complete all as specified and directed. Work shall be carried out by mechnical means.

M&L for preparation of surfaces and applying two coat of oil bound distemper with roller on the old treated surface of wall etc complete all as specified and as directed. Work shall be carried out by mechnical means.

M&L for preparation of surfaces and applying two coat of oil bound distemper with roller on new surface of wall with primer etc complete all as specified and as directed. Work shall be carried out by mechnical means.

M&L for Preparation of new plastered surface of ceiling and applying three coats of white wash. Work shall be carried out by mechnical means.

M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Work shall be carried out by mechnical means.

M&L for preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed. Work shall be carried out by mechnical means.

M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint, all as directed.

M&L for Removing /cutting trees vegetation, digging out roots from concrete or brick wall filling holes on building wall/roof/cajja/water tank staging area etc and making good with cement mortar 1:4 complete.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Demolition of brickwork built in any type of mortar, complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

Demollition of Cement concrete (reinforced) in roof, floors( other than ground floor), beams staircases, landing, chajjas and similar suspended works all as specified and as directed.

S&F formwork to chullah hoods, chajjas and similar works including edges all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for Reinforcement cement concrete type B-1 (1:2:4) 20mm graded stone aggregate for chajjas all as specified and directed

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors. complete all as specified and directed.

All as per item No 30 as above but 75mm bore. complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, of any radius provided without access door. complete all as specified and directed.

All as per item No 32 as above but 75mm bore. complete all as specified and directed.

M&L for preparation of new wall surfaces and applying two coat of cement base paint complete.

M&L for complete removing of existing treatment on wall surface and applying two coat of OBD over 3 mm thick birla white care Putty on wall to obtain smooth finish etc complete all as specified and directed.

M&L for preparation of old decorated surface of wall, roof or sheet any type and applying two coat of ACE exterior emulsion paint (Asian Paint) complete all as specified and directed

M&L for two coats of synthetic enamelled paint over a coat of red oxide on new/old steel surfaces over 10 cm width or girth over new/old steel surfaces etc, complete all as sfd and directed.

S&F in repair wash basins, vitreous China white size 580x450mm size, including cutting for and pinning in ends of brackets or erecting stand including waste pipe and cp waste coupling complete all as specified and directed

S&F PVC cabinet box and shutter made out of 18mm thick PVC prelaminated wood grain board shutter on one side and balacing white to be fixed on the PVC frame with auto hinges and steel screw including fancy type stainless steel handles of suitable size complete all as specified and as directed.

S&F Vitreous china counter top wash hand basin 'white/ivory' miniumum size 560mmx470mm fixed on and including 18-20 mm thick telephone black machine polished granite slab in single piece of minimum size 900 mm x 600mm including necessary cutting and bevelling of exposed edges of slab.including chromium plated brass coupling, bottle trap,15 mm chromium plated pillar cock, PVC braided connection, 15 mm bore angular stop cock and other accessories as required complete all as specified and as directed. Note :- WHB shall be fixed to granite slab with M-seal or Araldite to make leak proof joint.

S&F in repair stop valve, 15 mm dia cast copper alloy, chromium plated with fancy type (angle type) screwed down, high pressure, screwed both ends for iron pipes.

S&F in repair fancy type, chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Dismantling PVC water tanks exc 250 but n. exc 500 ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks white colour 500 ltrs (cylingdrical vertical with closed top) rotetional threded tank cover hoisted and fixed in position.

S&F in repair gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete

S&F Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed in repairs.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work complete.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in leveling course to floor for roof treatment complete all as specified and directed.

M&L for treatment of roof with reinforced elastomeric liquid waterproofing membrane of 100-micron thickness in four layer having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371, respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120°C as per IS: 101 (P-7/Sec-3) 1990 having VOC less than 1g/ltr as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 3.5 bars of pressure for 7-days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along with water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25–40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS:101 (P-8/Sec6)1993 and also should pass Impact test as per IS:101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc., with pressure washer after repairing the existing roof having old bitumen membrane by filling cracks, potholes, holes with waterproofing compound having compressive strength as per IS-4031 part-6-1988 & permeability of water as per IS2645-2003. The work will be done under the supervision of the Engineer-in-charge by Graco airless machine & OEM should be an IGBC (Indian Green Building Council) member & GRIHA Council Certified. The coating thickness and the methodology of application shall strictly be as per the manufacturer's specificationsand as approved by the Engineer-in-charge. (Make: Dr. fixit, Pildilite, Sika, M/S Starsshield Technology Pvt.Ltd

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,

M&L for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm grades aggregate) as in sub base of flooring complete all as specifed & directed

M&L for Non- skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including laying screed bed or bedding layer of mortar 15mm thick in cm 1:6 complite all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x250 x 7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:4 complete all as specified and directed.

Demolition & breaking AC drain pipes (salt glzed ware, AC,PVC) set in cement mortar,dia of pipe 100 mm

M&L for Cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc.complete all as specified and directed.

M&L for formwork to sides and soffites of floors or roof beam, beam haunching, girders, bressummers,lintels,cantilevers,shelves including supports,overhangs,etc also splays between floors and beams etc for fair finish.

M&L for RCC M25 using 20 mm graded stone aggregate as in beams, cantilever, bressummers, lintels over 1.50 m spanand similar work etc complete all as specified and directed

Taking down chowkats or fromes exc 1.5sqm but not exc 4 sqm each (without taking off shutters from the frame) & removing from site complete all as specified and directed

Taking down chowkats or frames not exc 1.5 sqm each (without taking off shutters from the frames) & removing from site complete all as specified and directed

S&F Aluminium window (Powder coated ) double leaf /three leaf with anodized aluminium frame sliding/openable including wheel powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of builders hardware fittings necessary and gazing with 5mm thick ordinary plain glass including wire mesh shutter necessary fittings fixuters & aluminium snap beads complete.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/\ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Aluminium anodised barrel tower bolts of extruded section of length of bolt 200mm all as specified and as directed.

Supply only butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 100mm all as specified and as directed.

S&F Aluminium handles, cast type, anodised of size 150mm all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm all as specified and as directed.

S&F Chromium plated stainless steel (Grade S-304) (heavy) grating minimum 3 mm thick of size 125mm dia for trap

S&F Chromium plated stainless steel towel rail with lower hanger with hooks fixed to wall with chromium plated brass screws 600mm long between flanges complete. Note : Stainless steel towel rail cat Part No. AHS-1581 of make 'Jaquar' or equivalent model of make specified in Appendix 'B' to particular specifications.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete.

S&F Chromium plated brass soap dish (oval shape) to walls (size not less than 125mm long).

S&F in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications.

M&L for Cast iron floor trap of 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches, socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-

(a) One light/fan/bellpoint controlled by one switch single pole one way

(b) All as per item No 79 here-in-before but one 3 pin 6 amp switch socket out let independent .

(c) All as per item No 79 here inbefore but one 3 pin 6 amps socket outlet on the same board with other switch complete .

All as per item No 79 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.2.5 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board.

S&F switch modular flush 10A single pole one way ISI marked

S&F modular sockets 10 Amp 2 in 1 2/3 pin combined all as specified and directed.

S&F switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked

S&F modular sockets 16 Amp 2 in 1 3/5 pin combined all as specified and directed.

S&F ceiling rose surface bakelite 60x25mm three terminal

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED batten extruded surface mounting fitting 2 feet long aluminium housing 10 watt input voltage 220 volt inbuilt LED and driver complete all as specified and as directed.

S&F Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of making holes and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed.

S&F wall mounted fan 400mm sweep, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by two pull cord system complete all as specified and directed.

S&F of exhaust fan 300 mm (Metal body) sweep complete with louvers including connecting with suitable size of copper conductor from ceiling rose to fan complete all as specified and directed.

S&F LED 2 X 2 ft backlite surface mounted fitting 36 Watts not less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours , Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed complete all as specified and directed.

S&F MCB DB SPN 4 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.

S&F MCB, single pole and neutral, 230 volts, 32 Amp rating, 'C' series fixed in DBs catered here-in-before.

S&F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge

Note:- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M/S V K MEHROTRA (BID ID -3050643)

Abhinav Builders (BID ID -3050407)

M/S SWASTIK BUILDERS (BID ID -3051289)

M.R. ENTERPRISES (BID ID -3050421)