SPECIAL REPAIR TO BUIDING NO 11 T 14 T 16 T OF ETI AND CERTAIN REVENUE WORKS IN EAST AREA OF AF STATION UNDER GE M AF JALAHALLI BANGALORE

Amount

Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for.

Material and labour for 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as wearing coat for laying floor finishes, finished fair to receive tiles complete all as specified and as directed.

Material and labour for 25mm thk PCC 1:2:4 type B-1 using 12.5 mm graded agg as in flooring finished even and smooth without using extra cement

Material and labour for Hardcore of gauge n.exc 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stones or boulders all as specified.

Material and labour for cement concrete 1:4:8 type D-2, 100 mm thick using 40mm graded stone aggregates as in sub base of flooring etc complete all as specified

Material and labour for cement concrete 1:4:8 type D-2, 50mm thick using 40mm graded stone aggregates as in sub base of flooring etc.

Material and labour for 50mm thick cement concrete 1:2:4 type B-1 using 20 mm graded agg as in flooring/pavings finished even and smooth without using extra cement complete all as specified

Material and labour for 20 mm thick screed bed in cement mortar 1:6 for laying floor finishes.

Material and labour for machine cut Sadarahalli Stone slabs of 18-20mm thick (1st Quality) as in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match including grinding, polishing, cutting edges and all as specified and directed and including making good the existing surfaces of walls.

All as per item No 10 hereinbefore but on vertical surfaces, skirting/dado. etc all as specified and directed

Material and labour for machine cut kota stone slab flooring 20-25mm thick laid & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing complete all as specified& directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick in steps/vertical surface laid & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing complete all as specified& directed.

Material and labour for Dubbing out 15mm thick on irregular face of walls in CM 1:6 on brick work or concrete/stone surfaces.

Material and labour for rendering 10mm thick in CM 1:3 on brick work or concrete surfaces as in backing coat to receive wall tiles etc.

Material and labour for Rendering 15mm thick in CM (1:4) (5mm with WPC over 10mm thick in two layers) on surfaces of walls mixed with water proofing compound on stone masonry/concrete surface or brickwalls finished even & smooth without using extra cement. Note : WPC shall be measured & paid seperately

Material and labour rendering 15 mm thk on brick or concrete surface in CM 1:6 and surface finished even and smooth without using extra cement.

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement and all as specified and directed.

Material and labour for rendering 10 mm thick in CM 1:4 on fair faces of brick work/stone masonry faces all as specified.

Material and labour 5 mm thick rendering on fair faces of concrete surfaces on ceiling in CM 1:3 and finishing the surfaces even and smooth without using extra cement.

Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates complete finished fair and even.

Material and labour for coloured glazed ceramic tiles of size 300x200x7 to 8mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

Material and labour for Colored Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and all as specified and directed.

Material and labour for pre- polished granite slab machine cut, in skirting/dado, steps, jambs, pillars, window cill, cooking platform etc. of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones complete all as specified and as directed.

Material and labour for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in copings/benching of manholes including weathering rounded/chamfered angles and throating as directed including necessary form work. Exposed surfaces of concrete shall be finished even and smooth with out using extra cement.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc. but excluding washer facing dressed stone work and precast concrete articles.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6.

Material and labour for Brick work with sub class 'B' old size bricks built in cement mortar 1:4 straight on plan exc 6m mean radius

Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar.

Material and labour for preparation of New surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying three coat of white wash on walls

Material and labour preparation of plastered surfaces of ceiling and applying three coats of white wash on new surfaces.

Material and labour for two coats of white wash on old surfaces of wall including necessary preperation etc complete all as specified and as directed.

All as per item No 34 here in before but in ceiling.

Supply only integral water proofing compound.

Supply and fix in repairs 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.

Supply and fix in repairs 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.

Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed.

All as per item No 39 above but 75mm dia

Supply and fixing low density polyethylene pipe of pressure rating 6 kg/sq cm for WHB/sink of 32/40 mm bore all as directeded.

Supply and fixing in repairs 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement

Supply and fixing in repairs 75mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cement

Supply and fixing in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

Supply and fixing Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 Kgs

Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in bed to drain pipes of bore 100 mm bore including packing under and haunching against the sides of pipes after they are laid and tested.

Material and labour pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 and all as specified and directed.

Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete sets in CM 1:4 type C1 1:3:6 concrete.

Taking down Chowkhat or frames exceeding 1.5 Sqm and not exceeding 4 sqm each with shutters(Without taking off shutters from the frames) and all as specified and directed.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in window cill, cooking platform and over 15mm thick rendering in CM (1:4) complete all as specified and as directed.

Supply and fix aluminium anodised powder coated three track sliding window frame with shutters including all necessary joining cleats, hold fast, rubber gasket, snap beading, handles and locking arrangements etc. complete and glazing with 5 mm thick tinted glass and wire cloth to aluminium frame work using rubber gasket where the section of frame and shutter is as under :-(A) Sections for frame (i) Top and verticals 62 x 29.50 x 1.30 mm thick (ii) Bottom 62 x 29.50 x 1.20 mm thick. (B) Sections for shutter (i) 'A' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'H' section 41 x 20 x 1.10 mm thick. Note: Glazing & wire mesh shall be measured and paid separately. Make: Jindal or equivalent sections of Hindalco.

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc and including fixing of glass and particle boards etc. complete all as specified and directed by EIC.(Note : Glass and particle shall be paid under different item).

Supply only 12mm thick Veneered particle board, solid core, exterior grade, with decorative face veneers for both faces and all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.removing mortar from and cleaning stones; stacking for measurement including all extra handling and removal and disposing off rubbish

Material and labour for 75 mm thick rough dressed stone slab flooring bedded, jointed and pointed in cement mortar 1:3 and all as specified and directed.

All as per item No 56 here in before but except stone slab.

Material and labour for distempering walls with two coats of washable distemper oil emulsion on new surfaes over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish all as specified.

Material and labour for two coats of cement based paint over a coat of primer on newly plastered surfaces of wall including necessary preparation and all as specified and directed.

Material and labour complete removal of old decorated wall surfaces of any description and applying two coat oil bound distemper over one coat interior primer and all as specfied and directed by Engg-in- Charge. Make : (Asian Paints)

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of cement based emulsion and all as specified and directed. (Make : Shalimar Shaktiman, Berger wall masta, & Asian Paints)

Material and labour for Surface Excavation not exe not exe 30cm depth and avg 15cm depth and getting out hard soil complete all as specified.

Material and labour for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil complete all as specified.

Material and labour for 40mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in flooring and finishing cement concrete surface even and smooth without using extra cement etc.

Material and labour MS bar10mm dia TMT & over deformed & twisted bars cut to length ,bent to shape required incl cranking , bending , hooking, for lintel and binding with MS wire not less than 0.9 mm dia or securing with clips.

Material and labour MS bar 6 to 8 mm dia TMT & over deformed & twisted bars cut to length ,bent to shape required incl cranking , bending , hooking, for lintel and binding with MS wire not less than 0.9 mm dia or securing with clips.

Material and labour reinforced cement concrete (1:2:4)typeB-1 using 20mm graded stone aggregate as in slabs and finishing exposed surfaces fair & even all as specified.

Material and labour for Formwork to flat sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.and finished fair surfaces all as directed.

Material and labour for MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; racks ,railings; framework of water tanks including all necessary welding,drilling and similar work conforming to Fe.290.Gde-E-165 all as specified and directed .

Supply and fixing of MS Mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets and sheeting is welded to frame etc. as required all as specified and directed .

Preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide all as specified

Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Material and labour for Sand filling under floors or in foundations including watering and consolidation all as specified.

Material and labour for Mild steel work as in angle Iron,tubes, Channel section,flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exxc.6mm) making jointless by filling including cutting etc complete all as specified.

Material and labourfor Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, wood grain printed PVC sheet used instead of Plain colour PVC sheet suppling & fixing in opening as per specification & drawing

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly

Supply and fixing of Galvanised mild steel wire cloth, 0.58mm nominal dia of wire and average width of aperture1.18mm and fixed with tinned tacks, or galvanised wire staples

Supply and fixing Butt hinges, medium weight coldrolled mild steel and fixed 100mm size.

Supply and fixing 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed

Supply and fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed

Supply and fixing of 125mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed

Supply & Fixing 125 mm Aluminium handles, cast type, anodised

Material and labour for 25mm thick PCC (1:2:4) type B1 using 20mm graded stone agg as in levelling coarse under floor finishing rough all as specified & directed

Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor and all as specified and directed.

Taking down steel windows / ventilators area n.ecx 1.5 Sqm each including all fittings and all as specified and directed.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed.

Supply and fixing 4 mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing in repair PVC High or low level flushing cistern 10 liters capacity (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever,Joint between flushing pipe and socket of W.C. pan pre-made, if any complete all as specified and as directed.

Supply and fix in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed

Supply and fix 15 mm bore fancy type pillars taps chromium plated cast copper alloy with capstan head, long screwed shanks complete all as specified and as directed.

Supply and fix waste coupling of PTMT (half or full threaded) Minimum weight 32mm- 45gms complete all as specified and as directed.

Supply and fixing in repair Stop valve of PTMT 15 mm dia any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms)

Supply and fixing in repairs PVC flexiable pipe (Connecter) 15 mm dia, 450 mm long with check nut and bolt with washer all as specified

Supply and fixing in repairs PVC waste pipe 32mm bore for WHB/Urinals

Supply and fix wash basins, vitreous China (flat back or angle back type) size 550x400 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed

Supply and fix in repairs wash basins, vitreous China (flat back or angle back type) size 550x400 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed

Taking out steel water tubing and connections including cleaning for refixing 15 mm dia.

All as per item No 102 here in before but 20mm dia.

Supply and fixing 15 mm dia galvanised steel water tubing medium grade to walls and ceiling or lying in floors.

All as per item No 105 here in before but 20mm dia.

Cutting openings through walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry built in cement mortar for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises

Supply and fixing of 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).

Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm

Supply and fix in repairs PVC cowl 110 mm dia complete all as specified and as directed.

Supply and fix in repairs PVC cowl 75 mm dia complete all as specified and as directed.

Supply and fixing in repairs 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement

Removing excavated material, in soils, n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed

Material and labour for point wiring One light point controlled by one switch one way 5 Amps with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm on surface of wall including provn of PVC box of suitable size for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed.

Supply and fixingswitch piano flush type single pole two way switch 5 Amps

Supply and fixingceiling rose surface bakelite 3 terminals 65x50mm all as directed.

Supply & fix Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 9 Watt.Make : Havells. Cat No-LHEXBLP7IN1W009 or equivelent WIPRO/CG/Bajaj/Philips

shashi shekar construction

Sri Lakshmi Venkateswara Enterprises

LAKSHMI CONSTRUCTIONS

SHREE BANASHANKARI ASSOCIATES

PRAGATHI BUILDERS