REPAIR TO ROOF, JOINERY, PLUMBING, FLOORING AND CERTAIN MAINT WORK IN TECH AREA AT 25 ED AT AF STN DEOLALI

Amount

Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified.

S&F for Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified.

Supply and fixing 0.63mm Plain, galvanised, mild steel sheeting, in idges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F Aluminum anodized powder coated frame fo doors, windows, ventilators powder coating (Min thickness of powde coating 50 microne) with one or more rebated including jointing cleats for fixing etc complete all as specified.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed

M & L for prepariation of New plastered surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting for preparatory to distempering on surfaces of walls.

S&F Aluminum anodized powder coated door shuttes, aluminum section weighing 0.55 Kg/m including necessary, jointing cleats, glazing clip, rubber neoprene packing handles two nos in each door, hinges three nos in each leaf, anodized snap beading screws etc powder coating of any colour (Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F Aluminum anodized powder window and ventilator shutters side hung type without sash , aluminum sections weighinh 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing anodized aluminum snap beading screws anodized aluminum fittings such as peg stays 150mm long (one no) hinges type B-21 100mm long (2 no) suitable handle (01 no) for each leaf ,powder coating of any colour (Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F Mortice brass lock vertical type size 100mm with 4 levers complete all as directed.

S&F floor spring double action hydraulically regulated made up of min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty ISI Marked fixed in position, complete all as specified and as directed.

M&L two coats of synthetic enamel paint over one coat of pink primer including preparation on wood or wood based surfaces of any description on new surfaces exc. 10 cm width or grith complete all as specified.

M&L one coats of synthetic enamel paint including preparation on steel or steel based surfaces of any description on old surfaces exc. 10 cm width or grith complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

Taking down and romoving Chowkats or frames not exc. 1.5 sq.m with shutter (without taking off shutters from the frames) complete all as specified.

Taking down shutter exc 1.0 sqm but not exc. 2.0 sq.m each complete all as specified.

S&F 2nd class hard wood factory made 35 mm thick plain, framed, panelled shutters(any no of panels) with panels of timber flat on both sides (feather edge) or of veneered partical boaed medium density, wood pertical board with commercial face veneers; supply and fix two chowkats complete all as specified.

S&F 2nd class hard wood factory made 30 mm thick Glazed and sketon shutters, open rebeated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SS Part-I, section 8, clause 8.24 (a) supplied and fited to chowkat complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC printed sheet & edges will be painted to match with printed sheet ,reinforced with M.S. Square tube, in opening as per specification & drawing complete all as specified.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading in the frame at site as per specification & drawing complete all as specified.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified

S&F 100 mm Butt hinges, Medium weight, cold rolled mild steel, and fixed complete all as specified.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified .

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, including flush pipe of polyethylene of low or high density or PVC 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connection in repairs complete all as specified.

S&F Chromium plated jet for EWC complete all as specified.

S&F 10 Ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any in repairs complete all as specified.

S&F Vitreous china wash basin, white, flat back, size 550 X 400 mm including fixing with brackets exclusive of fixing of supply and waste pipe and 32 mm chromium plate waste fitting with long screwed shanks and fly-nuts complete all as specified.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm in repairs complete all as specified.

S&F 15 MM Bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube fixed in repair complete all as specified.(Make: Jaqure, Modle no FLR-5047,CERA-F1018151 or equivalent)

S&F 15 mm bore Brass CP mixer for WHB for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified. (Make: Jaqure, Modle no FLR-5167NB , F2010461 or equivalent)

S&F 15MM Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to15 mm bore steel tube in repairs complete all as specified.(Make: Jaqure, Modle no FLR-5053N , F2004351 or equivalent)

S&F 15 mm bore Brass CP mixer for wall for mixing hot & cold water with provision for overhead shower with 115mm long bend pipe on upper side , connecting & wall flange fancy type, cast copper alloy, chromium. (Make: Jaqure, Modle no FLR-5273 UPR , CERA-F1014401or equivalent)

S&F Brass chromium plated shower rose 125mm size for iron pipe or for unions and fixed to 15 mm bore steel tube in repairs complete all as specified.

S&F Aluminium anodised tubular towel rail, 20 mm dia., D type, 60 cm long between flanges in repairs complete all as specified.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F Soap dish, cast copper alloy, chromium plated with screws complete all as specified.

Material and labour for raking and taking out the sealing compound from existing old joints of pavements/ hard standing with raker to full depth as directed and cleaning the joints by means of compressed air and filling back joints as described hereinafter including disposing off the old materials to a distance exceeding 100 metres and not exceeding 200 metres complete: (a) Joints shall be of any width n Exc 60 mm wide and 50 mm deep (b)Priming the side and bottom of joint with suitable primer as per manufacturer's instructions and filled with bituminous sealing compound of Grade A or equivalent sealing compound of deep 50 mm conforming to BS:5212 and laying masking tape on edges of joints complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S&F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store complete all as specified.

S&F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

S&F 1000 Ltrs capacity, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube and dismantling existing water tank and removing complete all in repair as specified.

S &F in repair 12mm thick toughened glass pane fixed to opening with stainless steel cleats as directed by Engr-In-Charge

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete incl 20mm thick screed bed in CM 1:4 complete all as specified and dircted by Engr-in-Charge.

Dismantling structural steel work as in doors, gates including rollars and rail etc but excluding framed truss etc.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks

M&L 1.6mm thick mild steel, plain black sheet in door shutter, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or wel

M&L for mild steel roller of existing size approx 10 cm to 14 cm dia including bearing and welding to angle iron door frame and neessary flat iron clamps bolts, necessary greasing and oiling complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete (Reinforcement cut as required to facililate demolition) (below or above ground level ) not exceeding 15 cm thickness

M & L for precast reinforced cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with angle frame plain faces and set in cement mortar 1:4.(Rinforcement shall be measured and paid seperetly)

M & L for reinforcement of TMT bars 10 mm dia and above , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsall as completed.

M & L preparation of new surfaces of steel and iron of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide all as specified and as directed by Engr-in-Charge.

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. as specified.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 – 2006 of 60 mm thickness, M-35 Grade, with grey cement and pigment,over new sub-base complete all as specified.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and dircted.

Cement concrete type B-1, 1:2:4 (20mm graded aggregate), in plinth courses, kerbs and the like including weathering, slightly rounded or chamfered on edges and throating complete all as specified.

M&L for machine cut kota stone slab 20-25 mm thick in floor laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and Mirror polishing over and including cement screed bed 20 mm th in CM 1:6 complete all as specified.

M&L for machine cut kota stone slab 20-25 mm thick in skirting jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing over over 10 mm thick cement plaster in cement mortar 1:6 as backing of wall tiles complete all as specified.

M&L for 25mm th levelling course in Cement concrete 1:2:4 type B-0, (12.5 mm graded aggregate) complete all as specified.

S & F in repair for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for Glazed ceramic tiles, colour tile, in vertical surfaces, 450 X350 X 7 mm thick over 10 mm thick cement plaster in cement mortar 1:6 as backing of wall tiles etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

SIDDHIVINAYAK ENTERPRISES

M/S ANAND G NUNSE

shubham Enterprises

Santhi Enterprises

Apachi Systems

M/S Nilesh Enterprises

MAHIMA CONSTRUCTION