PROVN OF CATTLE FENCING AND PROVN OF RAIN WATER SHELTER WITH HARDSTANDING AND CERTAIN OTHER MINOR WORKS AT VARIOUS LOCATIONS OF MIL STN LUCKNOW UNDER GE WEST LUCKNOW

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, soft/ loose soil complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-2 (40mm graded) stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

S&F for MS steel work as in rectangular purlins, rafters and similar item complete including cutting, griding, welding etc as required (F290 Gde E-165) complete all as specified and directed.

S&F rolled mild steel in joist, channel, angle or tee sections, circular tubes fixed independently as in post, pillars stanchions etc (FE-290 Gde E165) complete including cutting grinding welding etc as required complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

M&L for preparation of new steel surface of any description exceeding 1cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed.

M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified.

M & L for 60 mm thick rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M & L for sand cushining under interlocking paver blocks complete all as specified and directed.

M & L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings complete all as specified and directed.

M&L for pre laminated coloured solid PVC wall panelling 5 mm thick with 40x6 mm PVC strip fixed to wall with necessary screws rawl plug etc complete all as specified and directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for 8mm thick laminated wooden flooring of approved colour and size fixed with approved adhesive as per manufacturer directions complete all as specified and directed.

All as per item 14 above but on verticle surfaces all as specified and directed

Supply and Fixing Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets including all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed.

Supply and Fixing mild steel screw bolts (machine made ) with hexagonal or square heads at one end, 10mm dia, not exc 10 cm long, bolt with waher and nuts all as specified

Supply of 3mm dia GI wire chain link fencing with 75x75mm mesh size and fixed to any type of strandard rails straining bolts etc including provision of binding wire.

Fixing only chain link fencing including line wires, any mesh, size and type fixed to any type of standards rails, straining bolts, etc.including provission of binding wire.

Material and Labour for PCC 1:3:6, type C2 (40mm graded stone aggregate) as foundation, filling and mass concrete all as specified and directed.

S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F framed work as in gusset plate for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fitting etc with welded, riveted or bolted of Fe-410 Gde 250A complete all as specified and as directed.

M & L for preparation of new steel surface of any description not exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M & L for Hardcore of broken stone boulders guage not exc 63mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surfaccomplete all as specified and directed

M & L for 75mm thick cement concrete type D-2, 1:4:8(40mm graded aggregate) as in sub base complete all as specified and directed.

M & L for brick work using fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement motar 1:4 complete all as specified and directed.

M & L for 15mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished fair and even complete all as specified and directed.

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of form work to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 5 cm and not exc. 10 cm in rough finished surfaces complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M&L Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for preparation of new plaster surfaces and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M & L for roughening the surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. and applying cement slurry at the rate of 3 Kg per Sqm complete all as specified and directed.

M & L for Non skid ceramic coloured floor tiles 7-8 mm thick shade as approved and area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors over and including set on 15mm thick in screed bed in cement mortar (1:6) and pointed in neat cement slurry including jointing with white or colour cement to match complete all as specified and directed.

M & L for glazed ceramic colour tiles of size 300 x450mm x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including10mm thick backing coat in CM 1:4 complete all as specified and directed.

S & F of 20 mm thick black granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) and the like, fixed over and including 10 mm thick cement plaster / screed in cement mortar 1:3 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting exc. 20 cm in girth complete all as specified and directed.

Taking down cement or cement lime plaster including tiles if exists, from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. including removing of rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M & L for 15mm thick rendering on brick work in CM 1:4 finished even and fair complete all as specified and directed.

m/s raghubar dayal

M/S SWATI CONSTRUCTION

M/S Reliance Construction

Total Construction & Management Services

M/S S S A ASSOCIATES

rajan construction

Abode Artisan Enterprises

ANIL CONSTRUCTION

M/S KAUSHIK CONSTRUCTION