SPECIAL REPAIRS FOR REPLACEMENT OF BER PUMPS AND PROVN OF HUMIDITY AND TEMPERATURE SENSORS AT NAVAL STATION KARANJA.

Amount

Notes : (i) The work consists of 02 jobs as under :- JOB (A) : SO(K)/13/2022-23/LBW JOB (B) : SO(K)/19/2022-23/SPL REP E/M (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

ITEMS FOR JOB 'A'

S&F Server version BMS software for realtime processing of all data being mapped in to the system by the DDCs and Protocol Integrators as mapped in the IO Summary. For 3500 IO points License (Includes Soft and hard points) The Protocol Integrator shall be Capable to Integrate Open protocol systems on BACnet /Modbus/Lonworks/MBus/J-Bus Protocol Made available on Ethernet IP, OR on serial RS 485 / 232 interface. Such Protocol Integrator shall Be Installed the same enclosures where the DDCs are installed complete all as specified & directed.

S&F Server machine for monitoring field devices. Storage of all backup data.19" Rack Mount BMS Server shall comprise of the following minimum hardware: HP Enterprise x 64class PC, Window Server Latest, Inter® Xeon® CPU @ 3.2GHz 20MB Cache, 16GB RAM, 2 TB Storage, RAID 1 complete all as specified & directed.

S&F of highly accurate and reliable thermoset polymer based capacitance humidity sensor and curve matched thermistor together with state-of-the-art digital linearization and temperature compensated circuitry in an attractive, low pro le enclosure to monitor room humidity & temperature levels. Options include manual override, communication jack & fan speed switch complete all as specified & directed.

S&F of CPO Plant Controller with 1 Ethernet port, 1 micro USB port, 1 USB Type A port, 4 RS485 ports and a RJ11 port for connecting to a local CPO-MMI complete all as specified & directed.

S&F of Expand point capacity of the supported plant controllers to a maximum of 256 physical I/Os for firmware 2.1 and later versions. Expand point capacity of the supported plant controllers to a maximum of 256 physical I/Os complete all as specified & directed.

S&F Clean room Monitor-Window 1, 3 digit, 7 segment 0.8” (20.3 mm) red LED displayof Display for T+ RH monitoring complete all as specified & directed.

S&Fof Interface between monitor application & Field device complete all as specified & directed.

S&F of data transmitter with field device to network connectivity complete all as specified & directed.

S&F of Application monitoring device in command center complete all as specified & directed.

S&F of Input voltage shall be 105 - 130 Vac, 60 Hz, 18 watts maximum. Thermal fuse in transformer primary rated at 239 °F (115 °C). Operating temperature shall be +32 to 122 °F (0 to 50 °C) complete all as specified & directed.

S&F of Wall-mount Enclosures designed exclusively for Device Storage & Safety with Specially designed bottom openable feature for ease of Access & Service of the Devices complete all as specified & directed.

S&F of 4 core x 1.5 sqm screened Armored cable for field communications complete all as specified & directed.

S&F of Wall Mount Encloser designed exclusively for BMS devices & Safety with Specially designed bottom openable features for easy access of & Service of devices complete all as specified & directed.

Testing, Installation, Commissioning, Documentation & Graphics Etc of system of sensors complete all as specified & directed.

ITEMS FOR JOB 'B'

Disconnecting carefully all electric connections and dismantling old unserviceable centrifugal/ Monoblock/ Diesel pump set including electric motor from pre-existing foundation complete with inlet/ outlet attachment and transporting to AGE E/M - II Store Yard of 40 HP Pump Set with Electric Motor complete all as specified & directed. Note :- (i) While taking out pump Set, the contractor will make arrengement pluging suction and discharge line with dead flanges, so that pumping of installation is not disturbed and there is no leakage of water. (ii) Cost of transportation shall be deemed to be included in the rate quoted for these items.

All as per BoQ Serial Item No.3.01 above but 40 HP Pump Set With Diesel Driven Engine complete all as specified & directed.

All as per BoQ Serial Item No.3.01 above but 10 HP Pump Set With Electric Motor complete all as specified & directed.

All as per BoQ Serial Item No.3.01 above but 7.5 HP Pump Set With Electric Motor complete all as specified & directed.

All as per BoQ Serial Item No.3.01 above but 3 HP Monoblock Pump Set complete all as specified & directed.

Supply, installing, testing and commissioning of Centrifugal type, Electric driven, CI casing and bronze impeller stainless steel shaft, Fire Pump set suitable for delivering 1620 LPM at 5.00 kg/cm2, 2900 RPM duly coupled with suitable capacity electric driven, 3 Phase, 415 Volt, 50 Hz, motor with base frame complete all as specified and directed.

Supply, installing, testing and commissioning of Centrifugal type, Diesel driven engine fire pump set, CI casing and bronze impeller stainless steel shaft, suitable for delivering 1620 LPM at 5.00 kg/cm2, 1800 RPM with base frame complete all as specified and directed.

Supply, installing, testing and commissioning of 10 HP capacity Monoblock centrifugal type, electric driven Pump Set complete with and including 3 Phase, electric driven induction motor, 415 Volt, 50 Hz of Capacity 7.5 KW suitable for 33 Mtr Head, Discharge @ 5.6 LPS Pump Set complete all as specified and directed.

Supply, installing, testing and commissioning of Capacity 7.5 HP, Monoblock centrifugal type, electric driven Pump Set complete with and including 3 Phase, electric driven induction motor, 415 Volt, 50 Hz of Capacity 7.5 HP suitable for 50 Mtr Head, Discharge @ 5.6 LPS Pump Set complete all as specified and directed.

Supply, installing, testing and commissioning of Capacity 3 HP, Monoblock centrifugal type, electric driven Pump Set complete with and including 3 Phase, electric driven induction motor, 415 Volt, 50 Hz of Capacity 3 HP suitable for 60 Mtr Head, Dischrge @ 5.6 LPS Pump Set complete all as specified and directed.

M&L for cutting the existing MS Pipe of size 100 mm dia in position and making arrangement for connecting delivery/ suction line for new pump set including all fittings and fixtures such as tee, bend, flange up to size 100 mm dia including cutting, welding, flange joint, rubber gasket, nuts, bolts and washer complete all as specified and directed.

M&L for cutting the existing MS Pipe of size 80 mm dia in position and making arrangement for connecting delivery/ suction line for new pump set including all fittings and fixtures such as tee, bend, flange up to size 80 mm dia including cutting, welding, flange joint, rubber gasket, nuts, bolts and washer complete all as specified and directed.

Supply, laying, testing and commissioning of 100 mm dia MS ERW pipe class 'B' in standard length conforming to IS 1239 part -I (ISI Marked) duly painted with two coats of synthetic enamel paint over one coat of primer complete all as specified & directed.

Supply & laying steel water tubing, galvanised, medium grade 80 mm bore including all GI fittings as required at site, laid in trenches/ floors/walls complete all as specified and directed.

Supply & laying steel water tubing, galvanised, medium grade 50 mm bore including all GI fittings as required at site, laid in trenches/ floors/walls complete all as specified and directed.

Supply & laying steel water tubing, galvanised, medium grade 40 mm bore including all GI fittings as required at site, laid in trenches/ floors/walls complete all as specified and directed.

S&F gun metal gate valve with iron wheel head, screwed both ends for iron pipes 50 mm bore complete all as specified and directed.

S&F gun metal gate valve with iron wheel head, screwed both ends for iron pipes 40 mm bore complete all as specified and directed.

M&L for plain cement concrete PCC (1:3:6 ), type C2 using 20mm graded stone aggregate as in foundation for installation of Pump Set, motor and trust block / pillars/ stand for support to Pipe lines, etc. complete all as specified and as directed.

M&L for mild steel framed work of angles, channels, cross arms, bracing, supports clamps and back plates fabricated from steel sections including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed with and inclusive of one primer coat one under coat and one finishing coat of synthetic enamel paint complete all as specified and directed.

Supply and connecting three core PVC insulated multistranded 1100 volt grade copper conductor cable of size 4 sqmm single runs drawn through existing pipes/ Floor/trench/wall including necessary jointing material such as copper lugs, insulation material etc. complete all as specified and directed.

Supply and connecting three core PVC insulated multistranded 1100 volt grade copper conductor cable of size 10 sqmm single runs drawn through existing pipes/ Floor/trench/wall including necessary jointing material such as copper lugs, insulation material etc. complete all as specified and directed.

Supply and connecting three core PVC insulated multistranded 1100 volt grade copper conductor cable of size 25 sqmm single runs drawn through existing pipes/ Floor/trench/wall including necessary jointing material such as copper lugs, insulation material etc. complete all as specified and directed.

S&F DOL starter in sheet steel enclosure, A/C 3 phase, type MK1, suitable for 3 HP Monoblock Pump Set complete all as specified & directed.

S&F DOL starter in sheet steel enclosure, A/C 3 phase, type MK1, suitable for 7.5 HP Monoblock centrifugal Pump Set complete all as specified & directed.

S&F DOL starter in sheet steel enclosure, A/C 3 phase, type MK1, suitable for 10HP centrifugal Pump Set complete all as specified & directed.

S&F Fully Automatic Star-delta starter in sheet steel enclosure, Type MN, A/C 3 phase, suitable for 40 HP centrifugal Pump Set complete all as specified & directed.

M&L earthing complete with GI earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) , type B1, using (20 mm graded stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering, 40 mm dia light grade GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-1(2009) connected to earthing test point all as specified and indicated including testing on completion. Note : (i) The unit rate includes for protection pipe and lead wire from top of earth plate up to 7.5 meter above ground level and also the cost of the Test point. (ii) Joining of GI earth strip with pipe of the test point shall be done by using suitable cable lugs.

pk Enterprises