Construction of Approach Road and Development of Area near HQ SPL DG (WC), Industrial Area Phase-II, Chandigarh.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. DSR 2.25(a)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) (DSR 4.1.10)

Brick work with common burnt clay F.P.S. bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR:6.1.1)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR : 6.4.1)

Providing and fixing M.S. flat railing having flat size 50x12mm having 6'-0" long and 2'-3" high above ground level and 1'-0" below ground level welded with 2no's M.S. flat 40x10mm horizontally at 6” upper and 6” from bottom and 10no's M.S. square bars of 45 degree angle at 6" center to center between the 2no's horizontally M.S. flat 40x10mm including the cost of 2no's 12mm dia nut and bolts with 2no's M.S. pipe of 19mm dia and 3" long sleeve piece. The bottom of vertical ounter M.S. flat 50x12mm shall be provided with 9" long anchorage piece of MS flat 50x12mm welded at bottom and railing shall be properly embedded in cement concrete 1:2:4 block of size 1'-0"x0'-9"x1'-0". The complete railing shall be painted with two coats of approved quality paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-Charge.

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) (DSR 13.5.1)

Pointing on brick work or brick flooring with cement mortar 1:3 (: 1 cement : 3 fine sand) ( Flush/Ruled/Stuck or weathered pointing )(DSR 13.31.1)

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Preparation of Sub-Grade at cutting portion. Loosening of the ground upto a level of 150mm below the sub grade level, watered, graded and compacted in layers to meet requirement of Table 300-2 for sub grade construction.

Providing and laying granular sub base by providing and laying, spreading and compacting course graded sub base material sand , morrow, graval, crushed stone of combination thereof confirming to grading –II of table 400.2 of MORTH specification (latest revision as on date). The material shall be mixed by mix in place method or with motivator at OMC and carried to site, spread in uniform layers and compacted with 8-10 tones smooth heeled/Vibratory roller to achieve desired density. Complete in all respect as per clause 401 of MORT&H specification (latest revision as on date)