Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 LAccepted-AOC | ₹6.6 L Quoted ₹6.7 L | L1 | Accepted-AOC as per financial evaluatin |
| 2 | L2₹7.4 LRejected-Finance BIKANER | BIKANER | RAJASTHAN | 334001 | ₹7.4 L | L2 | Rejected-Finance as per financial evaluation |
Tender Value
₹8 L
EMD Value
₹80,000
Closing Date
24 Dec 2025, 12:00 pmClosed
Executive Engineer
Office of the EE, PD, PWD, Kasganj
as per BoQ attached
2025_CEALG_1099680_1
2413/17A Dt 08-12-2025
Open Tender
Civil Works - Buildings
60 days
Kasganj
Please refer Tender documents.
2 documents required · 2 mandatory
₹856
₹80,000
Yes
18 Mar 2026
17 Dec 2025
24 Dec 2025
17 Dec 2025
24 Dec 2025
17 Dec 2025
17 Dec 2025 - 24 Dec 2025
Distempering with New & old work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre As per DSR Sl No 13.41.1
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) As per DSR Sl No 13.46.1
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : As per DSR Sl No 13.99.1 One or more coats on Steel Sarface old work
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : As per DSR Sl No 13.99.1 One or more coats on Wood Sarface old work
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 18.10 As per DSR Sl No18.10.1 15 mm dia nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 18.10 As per DSR Sl No18.10.2 20 mm dia nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 18.10 As per DSR Sl No 18.10.3 25 mm dia nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 18.10 As per DSR Sl No 18.10.4 32 mm dia nominal bore
Providing and fixing C.P. brass bib cock of approved quality conforming to 18:8931 : As per DSR Sl No 18.49.1 15 mm nominal bore
18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. As per DSR Sl No 18.51.1 15 mm nominal bore
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : As per DSR Sl No 18.18.1 15 mm nominal bore
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : As per DSR Sl No 18.18.2 20 mm nominal bore
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : As per DSR Sl No 18.18.3 25 mm nominal bore
18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to 1S:8931 As per DSR Sl No 18.53.1 15 mm nominal bore
18.17 Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end) : As per DSR Sl No 18.171 25 mm nominal bore
18.17 Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end) : As per DSR Sl No 18.17.2 32 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR Sl No 18.48
Providing and fixing brass stop cock of approved quality : As per DSR Sl No 18.161 15 mm nominal bore
Providing and fixing brass stop cock of approved quality : As per DSR Sl No 18.16.2 20 mm nominal bore
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.l. cover with frame of 300 x 300 mm size (inside) the weight of coverto be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 19.4.2 150 x 100 mm size P type As per DSR Sl No 19.4.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: As per DSR Sl No 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: As per DSR Sl No 17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required As per DSR Sl No 17.21 W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per DSR Sl No 17.31
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per 18:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : As per DSR Sl No 17.101.3 510x1040 mm bowl depth 200 mm each 7159.00
12 mm cement plaster of mix : As per DSR Sl No 13.41 1:4 (1 cement: 4 coarse sand)3
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.57 MB
BOQ_2025892.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid