Creation of 250 KVA Substation along with Its HT/LT network at Primary Health Centre Hazratbal

Supply, installation, testing and commissioning of:

9 mts steel tubular pole post 410 (SP-33) IS 2713 (part-II) 1990 as per REC Standard

GI Channel iron(ISLC 75 designation) 100x50x50x6 mm 9' long (2 No) duly fabricated as per site requirement & as per REC Standard .

GI Channel iron(ISLC 75 designation) 75x40x40x6 mm 9' long (8No) duly fabricated as per site requirement and as per REC Standard .

GI Channel iron(ISLC 75 designation) 75x40x40x6 mm 6' long (2 No) duly fabricated as per site requirement and as per REC Standard .

GI Angle iron braces (ISA 5050 designation) 50x50x6mm 6' long (4 No) duly fabricated as per site requirement and as per REC Standard

Providing of Chemical Earthing of Sub-Station for neutral earthing 2 mtr long 50mm dia GI to copper with additional 1 length GI pipe 38mm connected with chemical earthing and with extension of GI strip 25*3mm upto all equipments.Earthing has been laid through insulators to avoid with the existing structure for LA.

Galvanized Nuts & Bolts & washers of sorts. (Galavinsied as per IS-2633/1986)

GI Strip for Earthing 25x5mm as per REC Standard

300 mm² PVC single core LT cable connforming to IS 1554 (part -I) 1988 for incoming and outgoing circuits to be connected with LT Network including thimbling with 300 mm sq Al lugs

Bi matellic Clamps19mm².

11KV 400 AMP Gang Operated switch gear

Drop-out set (Horn-gap type) as per REC standard F6

11KV Lighting Arrester Set (Station type) as per REC standard fonforming to IS 3070 part -III and as per REC standard

11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, ( Copper wound 250kVA or higher kVA ratings) , and with LV Cable Box having detachable Aluminium Gland plate approved by the Department including earthing of Transformer along with fixing of flat iron strip to be fixed on earthling insulating boots of Sub Stations on two poles structure as per REC Standard F1,F2, F3 F4 &F10

LT Distribution Box for 250 kVA DTR with MCCB for incomer & SFU's for Outgoing Circuits

11KV pinwith insulators Brown glazed porcelain insulator confirming to IS-731/1971 Amendments 1 to 5 type B with 320mm minimum creepage distance and with lead/Zinc thimbles suitable for use with G.I forged pin having small steel heads as per IS-4l86 (P.I) 1993 and IS-2486 (P.II)1989 and revision with latest amendments if any as per REC Standard C-1

Danger plate as per REC Standard

Earthing as per REC Standard (J-2)

Earthing insulating boots

Providing, Erection, testing & commissioning of GI Angle iron for Transformer Belt (ISA 5050 designation) 50x50x6mm 10' long duly fabricated as per site requirement andas per REC Standard

Anticlimbing Device as per REC Standard

Sign Board

Cement bottoming of pole structures as per REC

Painting of poles/ structure with 2 coats of Al. & red oxide paint and painted of orange colouras per REC Standard

Supply, installation, testing and commissioning of:

9 mts steel tubular pole post 410 (SP-33) IS 2713 (part-II) 1990 as per REC Standard

GI Channel iron75x40x40x6 mm 2' long (24No) duly fabricated as per site requirement and as per REC Standard .

GI Angle iron braces 50x50x6mm 2' long (24 No) duly fabricated as per site requirement and painted as per REC Standard

GI Channel iron75x40x40x6 mm 6' long duly fabricated as per site requirement as per REC Standard . ( for tapping points)

Galvanized Nuts & Bolts & washers of sorts. (Galavinsied as per IS-2633/1986)

Danger plate as per REC Standard

11KV 400 AMP Gang Operated switch gear

Earthing Rods as per REC Standard (J-2)

70 mm AB cable

70 mm AB cable Kit

Suspnesion clamps

Pole clamps fabricated out of MS channel

Cement bottoming of pole structures as per REC

Painting of poles/ structure with 2 coats of Al. & red oxide paint and painted of orange colouras per REC Standard

THE NET SURFER

WULAR INFRASTRUCTURE PVT LTD