CONSTRUCTION OF KITCHEN SHED AT MYLADI PUE SCHOOL IN SENGANUR PANCHAYAT

Amount

CONSTRUCTION OF KITCHEN SHED AT MYLADI PUE SCHOOL IN SENGANUR PANCHAYAT

Drilling of 230mm dia with Reinforced Cement concrete 1 : 11/2 : 3 mix using 20mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed. For pile foundation

Earth work excavation and depositing on bank with initial lead and lift in all classes of soil except hard rock requiring blasting including all labour charges etc., complete for SS 20B for Foundation

Filling the basement with Carted Earth including all labour charges etc.,complete for foundation

Sand filling with Filling sand including cost and conveyance of all materials to site and all labour charges for filling etc.,complete.

Cement Concrete 1:4:8 using 40mm stone jelly including cost and conveyance of all materials to site and cost of labour and all other incidental charges etc.,complete.

Brick work in CM 1:5 mix using country bricks of size 8 3/4x4 1/4x2 3/4including cost and conveyance of all materials to site and all labour charges etc.,complete. Upto Basement and above Basement.Upto Basement

Brick work in CM 1:5 mix using country bricks of size 8 3/4x4 1/4x2 3/4including cost and conveyance of all materials to site and all labour charges etc.,complete. Upto Basement and above Basement.Above Basement

Supply and errection of centering for soffits of RCC item of works including all other labour charges Upto GL

Supply and errection of centering for soffits of RCC item of works including all other labour charges Above GL

Supply and Fabrication of steel including cost and conveyance of all materials and all labour charges etc.,complete

M-20 GRADED Concrete using 20mm ISS HBG Metal including cost and conveyance of all materials to site and cost of all labour charges for mixing, placing, levelling, compacting and curing etc.,complete Upto Basement

M-20 GRADED Concrete using 20mm ISS HBG Metal including cost and conveyance of all materials to site and cost of all labour charges for mixing, placing, levelling, compacting and curing etc.,complete Above Basement

Finishing the top of the roof with one course of Machine Pressed Tiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification

Plastering with CM 1:5,12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Providing and laying of Granolithic Cement Concrete in (1:2:4)mix, for flooring inculding cost and conveyance and all labour charges etc complete 25mm tk

Provision for Cuddapah slab 25 mm tk for Cupboards inclding Kitchen table, Conveyance and Fixing supply and fixing etc

Supply and fixing of steel Windows and Doors including cost and conveyance of all materials and all labour charges etc complete

door 1.0 x2.10m

window 1.20x1.30m

ventilator 0.90x.45m

Labour charge for fixing Doors

Labour charge for fixing windows

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and th.en sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc.,complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2023-24)

Distembering two coats with best approved Distember/lime including cost and conveyance of all other labour charges etc.,complete.

Exterior Emulsion Painting two coats with best approved Exterior Emulsion including cost and conveyance of all other labour charges etc.,complete.

Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete

Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T W Clamps, Plug, Shoes, bend, Screws, nails etc., complete

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 24

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 38

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 64

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70

Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 85

Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 142

Supply and fixing of 300 mm ( 12" ) AC Exhaust fan complete on the existing clamp. SD 114

Towards CFL bulb

Provision for Water supply arrangements for pipe Line

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Mallika K (BID ID -1500610)