Renovation of Houses Type XIII, H.No. 2098 (1 Nos.) and Type IV, H.No. 1355 and 1358 (2 Nos.) Houses in Sector 28, Chandigarh (IBM No. W4/2025/25189)

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in.

Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.1.1

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) DSR 13.7.2

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 lit. low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS :13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink without drain board DSR 17.10.2

610x460 mm bowl depth 200 mm DSR 17.10.2.2

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16A

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28

Flexible pipe DSR 17.28.2

32 mm dia DSR 17.28.2.1

Providing and fixing soil, waste and vent pipes :

Centrifugal cast iron S&S pipe as per IS: 3989 DSR 17.35.1.2

75 mm diameter : DSR 17.35.2

Centrifugal cast iron S&S pipe as per IS: 3989 DSR 17.35.2.2

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 75 mm outlet

Sand Cast Iron S&S as per IS- 3989 DSR 17.60.2.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

15 mm dia nominal bore DSR 18.10.1

20 mm dia nominal bore DSR 18.10.2

Providing and fixing of Gun metal peat valve complete in all respect

20mm DSR 18.17.1A

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

20 mm nominal bore DSR 18.18.2

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length DSR 18.21.2

15 mm nominal bore DSR 18.21.2.1

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)

15 mm nominal bore DSR 18.46.1

20 mm nominal bore DSR 18.46.2

Providing and placing on terrace (at all floor levels) polyethylene water storage tank,ISI : 12701 marked,with cover and suitable locking arrangement and making necessary holes forinlet,outlet and overflow pipes but without fittings and the base support for tank.[1000 ltr] DSR 18.48

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15mm nominal bore DSR 18.49.1

Providing and fixing C.P. brass long body bib cock of approved quality as per approved make

15mm nominal bore DSR 18.51.1

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15mm nominal bore DSR 18.52.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

15mm nominal bore DSR 18.53.1

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge DSR 18.53A

Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76.1

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passingdrain pipe etc. and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. DSR 18.77

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. DSR 18.78

Providing and fixing of Drip Seal joint of HCI Pipe & specials

Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4" i/d of approved make

Providing and fixing of C.P. cup heavy duty of approved make

Provinding and fixing of Tank Nipple

Const. of curb with C.C. 1:2:4 alongwith upto 1’-0” depth to make it water proof including Cost of sand, bajri complete in all respect of approved make

Prov. & fixing 22"x16"(550x 400 mm) beveled edge of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete of approved make

Provinding and fixing of C.P. Brass/ SS Towel Ring with screw etc complete in all respect of approved make Jal Model No. 36524 Warna or equivalent Model of CERA / Kerovit / ESSCO.

Provinding and fixing of C.P. Brass/ SS Soap Dish holder complete in all respect of approved make Jal Model No. 36540 Warna or equivalent Model of CERA / Kerovit / ESSCO

Providing and fixing of CP Brass / SS / ABS overhead Shower with swiveling joint, 125 mm dia ( min) with CP Brass / SS Shower Arm and flange complete in all respect of approved make ESSCO Model No. 536A &542A or equivalent Model of CERA / Kerovit/ Jal.

Please Enable Macros to View BoQ information