PROVISION OF PARKING SHED FOR MES PERSONNEL NEAR NEW PUMP HOUSE AT CGRA PARADIP

Amount

Surface excavation in soft and loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out and filling with PCC all round and removing surplus soil to a distance n exc 50m as in soft/loose soil.complete all as specified and directed. Note: PCC will be measured and paid separately .

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L Hardcore (broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade jointed with grey cement and pigment complete all as specified and directed.

M&L for 100 mm thick plain cement concrete type D2 1:4:8 using 40 mm graded stone aggregate complete all as specified and directed.

M&L for 40 mm thick sub base PCC type B1 1:2:4 20 mm graded aggregate as in sub floor finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete type C-2 , 1 : 3 : 6 (using 40mm graded stone aggregate) in foundation and filling concrete for columns, fencing posts etc complete all as specified and directed.

M & L for nominal mix of Type B1(1:2:4) using 20 mm aggregate, for foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for nominal mix of Type B1(1:2:4) using 20 mm graded stone aggregates as in columns,posts,piers,struts complete all as specified and directed.

M&L nominal mix of Type B1(1:2:4) using 20 mm graded stone aggregates as in beams, cantilevers, bressumers, cantilevers upto 1.5 m span complete all as specified and directed.

Use and waste of formwork to sides of fair finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of Fair finished Square, rectangular or polygonal form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel bars 6mm to 8mm dia in stirrups and main bar, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting he same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for marble work 15 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and floors and Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade complete all as specified and directed.

M&L Marble work (table rubbed and polished) for wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade existing complete all as specified and directed.

M&L for providing edge moulding to 16-18mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Mild steel screw bolts 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S&F for mild steel work in tubular trusses,vertical posts,rafter,purlin ,flat iron wind ties, plates(plain or chequered), channels, square cut or notched including special shaped washer,nuts,bolts for fixing ,tapping,screwing etc. complete using ERW or induction butt welded tubes as in framed work conforming to IS complete all as specified and directed.

S&F transparent polycarbonate solid roofing sheet, thickness 10.0 mm in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparing surface of steel and iron work of new surfaces and of any description over 10 CM width or girth ,not other wise describe and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Applying two coats of Black bituminous paint on surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth complete all as specified and directed.

S&F 15mm Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F steel tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F grating round 100mm size of PTMT(minimum 50 gms) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend/shoe complete all as specified and directed.

S&F 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) complete all as specified and directed.

Brickwork with fly ash modular bricks, built in CM 1 : 6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

Material and labour for 10 mm rendering in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of old decorated wall surfaces by brooming down,steel wire brushing, scraping down moulds,efflorescent salts and trading oil greasy spots and applying one coat of white wash complete incl filling putty /filler work where ever drepression found in wall complete all as specified and directed.

Material & Labour for new surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and directed.

One 3 pin socket outlet, 5/6 amps, on independent board.

All as per item No 43 here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board complete all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

Supply and fix ceiling rose, surface bakelite,65 x 50mm, three terminals complete all as specified and directed.

S&F Modular White Cover Plate with Frame, 3 Module complete all as specified and directed.

S&F Modular White Cover Plate with Frame, 4 Module complete all as specified and directed.

S&F Modular White Cover Plate with Frame, 6 Module complete all as specified and directed.

S&F Modular Metal Flush Box 3 module complete all as specified and directed.

S&F Modular Metal Flush Box 4 module complete all as specified and directed.

S&F Modular Metal Flush Box 6 module complete all as specified and directed.

Supply and fixing of Modular Fan regulator,120 watts complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed. Make of Crompton Greaves or equivalent of Bajaj/Phillips/ Havells.

Supply and fixing 1x 20 watt LED indoor box type surface / suspended industrial luminaire with aluminium housing with PC diffuser with LED Tube,Slim integrated design efficiency-125 lumen/watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. ( Make/Model No:-CCS-100-20-65-HL2-DP-NWH ( BRIGHT LINEA) of Crompton or equivalent of Bajaj/Phillips/Havells/C&S )

Supply & fixing in Building security light fitting, new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 30 watt. including provn of necessary connection complete all as specified and directed. (Make/ Model:- Crompton (ASTRA NEO), Cat No . LSTS-30-CDL-M or equivalent make of Philips/Havells/ Bajaj/C&S)

Supply and fixing Factory made sheet metal enclosure for DBs Double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete all as specified and directed. Make - L&T/standard/Havells.

Supply and fix MCB single pole and neutral, 240 volts, 32 to 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed. Make : Legrand /Siemens/Schneider

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series complete all as specified and directed. Make : Legrand or eqvt in Siemens/Scheinder

Supply and fixing of GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers complete all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2.0 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out in soft soil for laying of cables, foundation of poles, and stay assembly complete all as specified and directed.

Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete all as specified and directed.

S&L well burnt sub class ‘B’ bricks (using old size brick) laid in trenches above sand cushioning for cable protection complete all as specified and directed.

Returning, filling in (Soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removal of excavated soil to a distance not exceeding 50 Mtr depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

S & F 4 mm dia GI wire to connected building earthing to MCB DB Box complete all as specified and directed

HARI HARA NAYAK

RANA ENTERPRISES