Special Repairs and Additions/ Alterations to G-2, Type-VII Accommodation at DRDO Township, Phase-II, CV Raman Nagar, Bangalore

Amount

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Finishing walls with Acrylic Smooth exterior paint of required shade :Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :

Supplying and fixing in position best quality JAGUAR CAT NO. 039 OR ESSCO CAT NO.511 or equivalent make 15mm CP brass bib taps for cold water

a) Short body

b) Long body.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing of sliding UPVC window with Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).the colour of the profile shall be of natural (white ) colour. The profiles used for the outer frame, shutter and mullions shall be reinforced with 1.2mm galvanized iron steel. Profile of frame & sash shall be mitred cut and fusion welded at all corners, includingdrilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backerrod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

Supplying and fixing wash hand basin suit comprising of :

Best quality of vitrious china counter sunk oval shape wash basin of HINDWARE AMAZON Cat No: 91094 make or equivalent and 15mm powder coated piller cock,stop cock of approved make.

15mm CP brass pillar cock of approved make

15mm heavy quality flexible PVC inlet connection with CP brass hexagonal check nuts with washer at both ends.

15mm CP brass stop cock fixed between CI outlet and PVC inlet.

32mm heavy quality CP brass waste coupling with rubber plug and CP chain.

CP bottle trap with 32mm medium quality GI waste pipe with special from extension piece of the bottle trap to the floor trap, including necessary chasing the wall and floor and making good the same etc.,

Supply, installation , testing and commissioning of shower unit including 4 way diverter wall mixer with single lever , spout and shower head with necessary fitting of aproved make Complete with all CP wall flanges

Supplying and fixing European Water closet with cistern set comprising of.

a) White vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level vitreous china flushing cistern (single piece) of approved make with C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

b) 15mm CP brass stop angle cock fixed between GI and PVC inlet.

c) 15mm heavy quality flexible PVC inlet connection with CP brass hexagonal check nuts with washer at both ends.

Supplying and fixing of CP Health faucet of Jaquar make CAT NO.573 or equivalent make with 8mm dia and flexible tube wall hook, and angular stop cock etc., complete.

Supplying and fixing in position 5mm thick Polyprolene sheets over the compound wall supported by MS frame work and finished with a coat of primer and synthetic enamel paint on the steel surfaces.

Credit for CP brass items

SANGEETA ENGINEERS

VISION ASSOCIATES