Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.1 LAccepted-AOC 121 GURU GOVIND SINGH MARG LAL KUAN LUCKNOW UTTAR PRADESH 226001 | LUCKNOW | UTTAR PRADESH | 226001 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹26.2 L+₹78,315 (3.08%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹28.1 L+₹2.6 L (10.3%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹31.4 L+₹5.9 L (23.2%)Rejected-Finance | L4 | Rejected-Finance Other than lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
10 Jan 2022, 6:00 pmClosed
GE West Lucknow
GE West Lucknow, 11 SP Marg, lucknow Cantt-226002
REPAIR/MAINT OF ALL TYPE OF STEEL FURNITURE AND PAINTING/POLISHING OF ALL TYPE OF STEEL AND WOODEN FURNITURE UNDER GE (WEST) LUCKNOW
2021_MES_494231_1
GE/W/LKO/79 of 2021-22
Open Tender
Civil Works
Item Rate
270 days
Lucknow
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹70,000
Yes
20 Jan 2022
13 Dec 2021
12 Jan 2022
13 Dec 2021
10 Jan 2022
27 Dec 2021
13 Dec 2021 - 20 Dec 2021
Amount
ALMIRAH STEEL LARGE , 1/2 HANGING 1/2 SHELVES/ALMIRAH GLAZED STEEL AND ALMIRAH FOR MAP STEEL DRG NO : FD-1031,1033 and 1030 (For Item no 01 to 10) Taking down/out old unserviceable handle and Supply and fixing chromium plate handle 100 mm long complete all as specified and as shown on drg .
Taking down/ out old unserviceable lock and Supply and fixing 6 lever of brass lock complete all as specified and as shown on drg. Make of lock Harrison or Godrej .
Taking down/out old lock cover and Supply and fixing lock cover made of 16 gauge MS sheet complete all as specified and as shown on drg .
Taking down/out old MS Round bar 8mm fixing with lock upper bar and below bar same Supply and fixing of MS Round bar 8mm fixing with lock cover upper and lower complete all as specified and as shown on drg .
Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .
Taking down old unserviceable hanging rod and Supply and fixing hanging rod 20 mm bore mild steel chromium plated made of 1 mm thick conduit pipe , 915 mm long with both side steel socket complete all as specified and as shown on drg .
Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg .
Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . (Almirah Large)
Taking down old cleats and supply and fixing new cleats complete all as specified and as shown on drg .
Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Almirah Large Steel. Almirah 1/2 hanging 1/2 shelf & Almirah Glazed/steel, cleaning of rusted surface with including parts/item repaired / replaced under items No 4 to 8 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg.
ALMIRAH MED STEEL WITH SHELVES DRG NO FD-1032 (For Item No 11 to 20) Taking down/out old unserviceable handle and Supply and fixing chromium plate handle 100 mm long complete all as specified and as shown on drg .
Taking down/ out old unserviceable lock and Supply and fixing 6 lever of brass lock complete all as specified and as shown on drg. Make of lock Harrison or Godrej .
Taking down/out old MS Round bar 8mm fixing with lock upper bar and below bar same Supply and fixing of MS Round bar 8mm fixing with lock cover upper and lower complete all as specified and as shown on drg .
Taking down old cleats and supply and fixing new cleats complete all as specified and as shown on drg .
Taking down/out old lock cover and Supply and fixing lock cover made of 16 gauge MS sheet complete all as specified and as shown on drg .
Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .
Taking down old unserviceable hanging rod and Supply and fixing hanging rod 20 mm bore mild steel chromium plated made of 1 mm thick conduit pipe , 710 mm long with both side steel socket complete all as specified and as shown on drg .
Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg .
Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . (Almirah Small/Med)
Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Almirah Med Steel . Almirah 1/2 hanging 1/2 shelf & Almirah Glazed/steel, cleaning of rusted surface with including parts/item repaired / replaced under items No 13 to 19 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg.
LOCKER BED SIDE STEEL : DRG NO FD-257 & FD-1029 (For Item No 21 to 28) Taking down /out old unserviceable handle and Supply and fixing chromium plate handle , 100mm long Godrej Pattern complete all as specified and as shown on drg .
Taking down/ out old unserviceable lock and Supply and fixing 6 lever of brass lock complete all as specified and as shown on drg. Make of lock Harrison or Godrej .
Taking down old unserviceable hasp & staple and Supply and fixing new MS hasp and staple ,100mm size complete all as specified and as shown on drg .
Taking down /out old worn out legs and Supply and fixing legs of 16 gauge MS sheet with size & shape as exists complete all as specified and as shown on drg .
Taking down /out old U/S drawer and Supply and fixing of drawer made of 16 gauge MS sheet with size & shape as exists complete all as specified and as shown on drg .
Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg .
Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . (locker bed side steel)
Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Locker bed side steel . Locker Bed Side, cleaning of rusted surface with including parts/item repaired / replaced under items No 24 to 27 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg.
TABLE DINING OR'S FD- 165 M (For Item No 29 to 34) Taking down existing unserviceable top and S & F New top made by 18/19mm thick block board with 22 gauge aluminium sheet on around the top shall be provided all as specified and shown on drg and directed by Engr-in-Charge. Make of Block Board : Centuryply, Greenply & Archidply.
Taking down old unserviceable legs and Supply and fixing legs of length 720mm, made from 25mm bore 16 gauge MS conduit pipe throughout with shape and size as per exisiting complete all as specified and as shown on drg ..
All as per serial item No 30 above but centre stiffner size 1600x25x25mm.
All as per serial item No 30 above but side stiffener size 480x25x1.6mm.
Taking down old unserviceable shoe and Supply and fixing shoe PVC to legs complete all as specified and as shown on drg .
Welding of cracked joints on frame ,derusting, cleaning of old surface of frame with & including parts/ item repaired/replaced under item No 30 to 32 above and applying two coats of white synthetic enamel paint over a coat of pink primer complete all as specified and as shown on drg .
RACK TOWEL STEEL DRG No FD-106M & 1038 (For Item No 35 to 38) Taking out old leg and Supply and fixing new leg made out of 25mm bore MS tube having 1.5mm wall thickness, 2.08 Mtr long complete as specified and as shown on drg.
Taking down old unserviceable rubber shoe and supply and fixing new hard rubber shoe with size & shape as exists complete as specified and as shown on drg.
Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Rack Towel Steel . Rack towel steel, cleaning of rusted surface with including parts/item repaired / replaced under items No 35 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg.
All as per item ser No. 35 but Rack Towel Steel complete all as specified and shown on drg No FD-165M.
RACK STEEL 3/4 TIER DRG NO FD- 106M & 1038 (a) (For Item No 39 to 41) Taking out old unserviceable shelves and Supply and fixing new shelves made of 20 gauge MS sheet exists and applying two coats of synthetic enamel paint white over a coat of red oxide primer with size and shape as exists complete all as specified and as shown on drgs.
Taking down old unserviceable leg and supply and fixing new leg made of angle iron with size and shape as complete all as specified and as shown on drgs.
Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Rack Steel . Rack steel, cleaning of rusted surface with including parts/item repaired / replaced under items No 39 to 40 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg.
TABLE OFFICE OFFR'S STEEL/TABLE OFFICE CLERK STEEL DRG NO FD- 1003 & FD-1004 (For Item No 42 to 49) Taking out old unserviceable top and supply and fixing new top of size 1680mm (L)x870mm (W)x19mm made of 18/19 thick pre laminated MDF board, exterior grade, one side teak face & other side white balancing duly covered with 6mm thick teak wood beading all around top duly french polished with the reqd gloss steel screw to frame of complete all as specified and as shown on drgs. Make of board : Centuryply,Greenply,Archidply.
All as per serial item No 42 above but of size 1220 (L) x610mm (W)x19mm
Taking out old unserviceable lock and supply and fixing new brass lock 6 lever, after removing the dents of drawers and cup board to make it functional complete all as specified and as shown on drgs. Make of lock - Godrej/Harrison.
Taking out old unserviceable leg and supply and fixing new leg made of 1.5mm thick MS square pipe with size & shape as exists complete all as specified and as shown on drgs.
Taking down/out old centre stiffner and supply and fixing new centre stiffner made of 1.5mm thick MS square tube with size & shape as exists complete all as specified and as shown on drgs.
All as per srl item No 42 above but side stiffner complte all as shown on drg.
Taking down old unserviceable hard rubber shoe and supply and fixing new hard rubber shoe with size & shape as exists complete all as specified and as shown on drgs.
Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Table office offrs/clk steel . Table, cleaning of rusted surface with including parts/item repaired / replaced under items No 45 to 47 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg.
TEAPOY VARANDAH (FD-288,383) (For Item No 50 to 54) Taking out old unserviceable top and supply and fixing new top of table made of 18/19mm thick pre-laminated MDF board exterior grade of size 900x450mm, one side teak colour and another side white as balancing, table duly french polished required glass including 6mm thick teak wood edging all round the table complete all as specified and as shown on drgs
Taking out old unserviceable leg and supply and fixing new leg made out of 20mm dia MS conduit pipe having 1.5mm wall thickness with shape and size as exists and welded with frame complete all as specified and as shown on drgs.
Taking down U/S stiffner and S&F new stiffner made out of 10mm MS round bar bent to shape and size welded with frame all as shown on drg .
Taking down U/S hard rubber shoe and S&F new hard rubber shoe shape and size welded with frame all as shown on drg.
M& L preparation of old/new steel surface for painting and applying two coat of synthetic enamel white paint on all internal and external surface of steel and new surface over a coat of red oxide complete all as shown on drawing.
Chair Steel Tubular with Arms (FD-75M) (For Item No 55 to 59) Repair/Replacement of old unserviceable seat of chair and S& F of seat made out of 1st class teak wood duly canned as per Godrej Pattern all as per drg.
S & F of of back seat made out of seasoned shesham wood duly canned as per Godrej pattern
S & F of arms made out of seasoned shesham wood.
S&F Flat Iron Strip of 475 mm x25 mm 3 m thick welded for support to seat of Chair CB Steel
M& L preparation of old/new steel surface of chair tubular steel with arms for painting and applying two coat of synthetic enamel OG paint on all internal and external surface of steel and new surface over a coat of red oxide complete all as shown on drawing.
Rack Shoe Steel (FD/E6/MAP/02(R) ) (For Item No 60 to 63) Repair /Welding of Main frame (legs) of Rack shoe steel made of 25mm dia MS pipe (18 gauge). Top and bottom outer frame work of jali shelves shall be made of 19mm dia MS pipe (18 gauge). Jali shelves (05 Nos) shall be made with 3mm dis MS rods all as per details shown in the drawing.
Repair to all joints by welding and fixing in accordance with standard workmanship and all as shown in the drawing.
Taking down old unserviceable rubber shoe and supply and fixing new hard rubber shoe with size & shape as exists complete as specified and as shown on drg.
All as per item ser No. 60 but Rack Shoe Steel complete all as specified and shown on drg No FD-E6/MAP/02 (R).
PAINTING AND POLISHING OF ALL TYPE OF WOODEN FURNITURE M & L for Scraping of old polishing with sand paper/Grinder and apply two coat of Malamine Polish and one coat upto the required gloss finish or colour as directed by Engr-in-Charge to the following items/articles of furniture to complete the items internally and externally including necessary preparation of surfaces. Make of Polish :- Asian Paint/Berger. (a) Book case complete all as specified and shown on drg No FD-237.
All as per item ser No. 64 but Bed ply top complete all as specified and shown on drg No FD-246.
All as per item ser No. 64 but Chair writing complete all as specified and shown on drg No FD-280.
All as per item ser No. 64 but Chair Dining complete all as specified and shown on drg FD-279 & FD/MAP-II/04
All as per item ser No. 64 but Chair easy complete all as specified and shown on drg FD-229.
All as per item ser No. 64 but Hat stand with mirror complete all as specified and shown on drg FD-233.
All as per item ser No. 64 but Side board complete all as specified and shown on drg FD-26M.
All as per item ser No. 64 but Stool Dressing complete all as specified and shown on drg FD-282.
All as per item ser No. 64 but Sofa Set wooden 3 pieces to seat 5 persons complete all as specified and shown on drg FD-281 and FD/MAP-II/02.
All as per item ser No. 64 but Table 3'x2' with or without drawers complete all as specified and shown on drg FD-282.
All as per item ser No. 64 but Table 3'x3' complete all as specified and shown on drg FD-291.
All as per item ser No. 64 but Table dining 4/6/8 persons complete all as specified and shown on drg FD-273 & FD/MAP-II/03.
All as per item ser No. 64 but Bin Soil multipurpose complete all as specified and shown on drg FD/E6/MAP/0
All as per item ser No. 64 but Table bed side complete all as specified and shown on drg FD-248 & FD/E6/MAP/15
All as per item ser No. 64 but Table peg complete all as specified and shown on drg FD-277 & FD/MAP/11.
All as per item ser No. 64 but Teapoy complete all as specified and shown on drg FD-278.
All as per item ser No. 64 but Table dressing ladies with mirror complete all as specified and shown on drg FD-FD-32M & FD/AP-II/07..
All as per item ser No. 64 but Table centre complete all as specified and shown on drg FD-274.
All as per item ser No. 64 but Table writing complete all as specified and shown on drg FD-275.
m/s tripurari enterprises
RAGHUVANSH TRADERS
SANDEEP ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .