SPECIAL REPAIR TO E.I. IN RESEARCH LAB PWD B and R AT BHIWANI

Amount

Moulded case Circuit breakers: Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. (HSR 31.12 (C). i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase

ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. (HSR 31.13) ii) Size 40 mm x 40 mm x 6 mm.

M.S.Sheet (HSR 31.14) ii) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Distribution board with plug and socket: Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. (HSR 31.15) S.P.N. enclosure for single pole MCB 20 amp.

Blanking sheet .(HSR 31.16): i) Supply and erection of blanking sheet in existing distribution board.

Miniature Circuit Breaker and Isolator: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp

viii) TP MCB 40 amp. to 63 amp.

ix) TPN MCB 40 amp. to 63 amp.

Supply and erection of Fittings and Accessories. (HSR 31.18) vii) Call bell 220 / 230 volts A.C. Bakelite with double coil.

ix(b) Bell push flush type ( without flexible wire ) in existing sheet.

xi) Bakelite angle / straight button holder large size.

xii) Switch 5 amp. On existing sheet.

xiii) Wall socket 5 amp. On existing sheet.

xxiv) Erection only of 1x40 watts or 2x40 watts 1220 mm long /1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjacent point.

Erection and carriage of fans (HSR 31.20): i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.

Pipe Laying: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21) ix) Galvanized iron pipe 20 mm dia on flushed.

xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

(Q) Earthing (HSR 31.22): iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

x) Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .

xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) xxvi) 35 Sq. mm 3.5 Core Ard. Cable.

xxviii) 70 Sq. mm 3.5 Core Ard. Cable.

xli) 25 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28) iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

iv) 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core

PVC Insulated wiring in recessed conduit: Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. (HSR 31.36) i) Fan Point b) Medium Point

c) Long Point

ii) Light Point a) Short Point

b) Medium Point

c) Long Point

vi) Call bell point including MS box of size 180mmx 60 mm deep for call bell. c) Long point

vii) 3 pin 5 amp. Plug point including earthing the 3rd pin etc. a) Short Point

b) Medium Point

c) Long point

viii) 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

S/E of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) i) Cable size 1.5 sqm(3/0.81 mm)

iii) Cable size 4 sqm(7/0.85 mm)

iv) Cable size 6 sqm(7/1.05 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41) vii) 12-way,TP&N (Horizontal)(8+36)

Supply and erection of 50mm diameter 1.5mtr. Long GI bracket (B-Class) making an angle 10 to 15 degree with horizontal plane for mounting street light fitting on GI bracket on wall with 2 Nos. 50mmx3mm thick MS flat including cost of cutting welding of GI bracket on wall with 2 nos. 50mm x 3mm thick MS flate including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc including making necessary connection in all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.53)

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Deluxe model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection ect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.55)

Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. (HSR 31.69) vi) 4 Pole MCCB 200 amp

Non Schedule Items: S/E of 45 W LED street light fitting < 110 Lumens per Watt Philips / Havell's/ Bajaj/Wipro make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule Items: S/E of 20/22 W indoor LED Tube fitting with batten and tube, decorative ultra slim liniare LED lighting fixture with extruded poly carbonate, environmental friendly, energy effiecent completed including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. (Make:- Philips/ Havell's/ Crompton.)

Non Schedule Items: Supply only of ceiling fan size 48" without fan regulator with all standard acessories supplied by the manufacturer 3 nos. Aluminium blades /double ball bearing/ rod etc complete in all respect upto the entire satisfaction of the Engineer -in- Charge of the work. Make: Usha/ Orient/ Khaitan/ Bajaj.

Non Schedule Items: Supply of Exhaust fan of size 12" (1400 RPM) with all standard acessories supplied by the manufacturer complete in all respect. Make: Usha/ Orient/ Khaitan/ Bajaj.

MAHENDER KUMAR CONT

M/s Sai Aangan Enterprises

INFERNO POWER AND SAFETY

pawan Kumar

M/S SHIV ELECTRICAL AND CONSTRUCTIONS