GE (N) P/TOKEN- 07 OF 2024-2025 REPAIR TO SEWAGE LINE,SEPTIC TANK AND CONNECTED WORKS TO MD/OTM ACCN(DSMA, STN CELL, SCLU, ADV HQ(SWAC) AT VARIOUS UNITS IN THE AREA OF AGE B/R (EAST) UNDER GE(N) PUNE

Amount

M&L for cleaning/clearing & maintenance of under ground sewage lines by manually or mechanically in any depth by removing of any type of blockage from sewage drain upto and incl 300mm dia of bore by rodding or any other means manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning incl intermediate manholes. sludge water in form of semi solid/loose state will be disposed off the same(semi solid/liquid shall not be burried) including taking off manhole cover and refixing the same after cleaning. The operation shall be executed/carried out with any kind of sewage cleaning device to be included in the rate quoted by the contractor complete all as specified and directed.

M&L for cleaning of blocked WC/Gully trap/Floor trap/Nahani trap upto and including first manhole by manual labour as well flushing with clean water making the WC seat, gully trap, floor trap operational complete all as specified and directed by Engr-in-Charge.

Taking out semi soild, liquid suspension sludge and foreign material from man hole/septic tanks/soakage well of any description and any depth including pumping out of water and removing materials either by the same in covered van or trolley at out side MoD land and burring the same (semi solid/liquid shall not be burried) in ground inc complete all as directed. (Note: The location at outside MoD land for disposal of forieign materials obtained above shall be located by the contractor himself)

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation for shafts, wells, cesspits, manholes, pier holes, pole etc n.exc 10sqm on plan and getting out soft/loose soil complete all as directed

M&L for 100mm thick PCC type D-2,1:4:8 (40mm graded aggregate) as in foundation, filling in mass concrete etc complete all as specified and directed

M&L for PCC 1:3:6 type C2 (using 40mm graded agg) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm dia of bore pipe including demolition of existing old one with PCC complete all as directed.

-Ditto- all as per item No 6 here in before but 200mm dia of bore

-Ditto- all as per item No 6 here in before but 300mm dia of bore

M&L in repair for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition of existing old one (salt glazed earthware, AC or reinforced pipes etc) set in cement mortar complete all as directed.

-Ditto- all as per item No 9 here in before but 200mm dia of bore

-Ditto- all as per item No 9 here in before but 300mm dia of bore

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting our existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC(1:2:4) type B-1, smooth finished and reforming benching as required for any dia of pipe complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exc 1.50m but n.exc 3.0m in depth as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m as directed by Engr-in-Charge

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for pre-cast cement concrete block masonry with solid blocks exc. 10 cm in width, type C-1,1:3:6 (using 20mm graded agg) and setting in cement mortar 1:6 complete all as directed

M&L for brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:6 complete all as directed

M&L for brick work precast solid concrete block masonry (except blocks) in CM 1:6 incl demolition of brick work /precast concrete block walling built in cement mortar or cement lime mortar incl all quions, arches, pillars etc(serviceable/usable blocks and brick work obatined from other items shall be re-used under this item and cost of demolition of the same deemed to be included in this item) complete all as directed

M&L for PCC type B-1, 1:2:4 (20mm graded agg) as in copings, kneelers, apex stones,bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as directed

Demolition of RCC slab roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed

M&L for RCC (Nominal mix) Type B1 1:2:4(20mm graded crushed stone aggregate) slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Use & waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exc 200mm thick(Horizontal or sloping) complete all as specified and directed

M&L for 15mm thick plastering in CM 1:4 on brick or concrete wall surfaces fair and even with 2% of WPC on cement complete all as directed.(Note:WPC shall be measurned and paid in separatetly)

Supply only integral water proofing compound

M&L for preparation of new plastered wall surface of any description, width or girth, and applying two coats of cement base paint over a coat of primer complete all as specified.

Demolition of cement concrete(un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed

M&L for 100mm thick PCC type D-2(1:4:8) as in sub base on rammed earth complete all as specified and directed

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection 75mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete.

M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

-Ditto- all as per Srl item No 29, here in before but except tiles

M&L for pre polished chequred tiles of size 300x300x25mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing floor and including 20mm thick screed bed and bedding of layers in CM 1:6 including demolition of existing tiles complete all as directed.

M&L for coloured, textured design heavy duty exterior tiles of size 300mm x 300mm x10 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) and dismantling of existing tiles of any description complete all as specified and as directed. Make: Johnsun Endura textured design or equivalent of Kajaria/ Somani as approved by GE.

M&L for demolition & complete removel of sunken floor, water proofing plaster coated with bitumen as special water proofing slurry coat as per manufacturer instruction all concrete/ brick surfaces & fixed 40mm bore spout pipe on external wall with proper sealing plaster and after drying the floor fiixed of IWC with CI pipe, joints with special plastic sealant to prevent shrinkage and allow some movement then 40mm thick PCC 1:3:6 type C2(20mm graded agg) over filled with dry lean concrete 200mm thick M-5, type E2 (40mm graded agg) as in sunken floor complete all as specified and directed by Engr-in-charge

S&F in repair 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as speified and directed

-Ditto- all as per item No 34, here in before but on walls

S&F in repair 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as speified and directed

-Ditto- all as per item No 36, here in before but on walls

S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall incl GI clamp with screw complete all as directed.Make:ISI marked

-Ditto- all as per item No 38 here in before but 75mm dia fixed on wall complete all as directed

S&F in repair 110mm dia PVC (SWR) bends in any radius fixed with pipe complete all as directed.Make:ISI marked

-Ditto- all as per item No 40 here in before but 75mm dia fixed on wall complete all as directed

S&F in repair 110mm bore PVC (SWR) branch piece, single (Y) equal or unequal fixed on wall complete all as directed

-Ditto- all as per item No 42 but 75mm bore

S&F in repair 110mm bore PVC (SWR) junction, single (T) equal or unequal fixed on wall complete all as directed

-Ditto- all as per item No 44 but 75mm bore

S&F in repair 110mm bore PVC cowl

S&F in repair 75mm bore PVC cowl

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as directed

-Ditto- all as per item No 48, here in before but on 75mm dia of bore

S&F in repair 100mm bore cast iron cowls

S&F in repair 75mm bore cast iron cowls

S&F in repair 100mm bore cast iron bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as directed

-Ditto- all as per item No 52, here in before but on 75mm dia of bore

S&F in repair 100mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as directed

-Ditto- all as per item No 54, here in before but on 75mm dia of bore

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including P-trap (PVC) 100 mm dia., connection to flushing pipe, anti-syphonage pipe complete incl making good to floor all as specified.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white including trap, connection to drain (outgoing pipe) and to flushing pipe, anti-syphonage pipe, including PVC jet for Pedestal pattern pan including 450/600mm long PVC connection including PTMT nuts and plastic water closet seat of white in colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified.

S&F in repair vitreous china half stall type, white bowl urinal flat back white including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, incl 5Ltrs capacity PVC automatic flushing cistern with brackets 32mm dia PVC flush pipe and discharge pipe, grating and union for discharge pipe complete all as specified and as directed.

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair chromium plated gratings 75mm dia with drain hole all as specified and directed Make: ISI Marked or of equivalent make as per Appx'A' as approved by GE

S&F in repair chromium plated gratings 100mm dia with drain hole all as specified and directed Make: ISI Marked or of equivalent make as per Appx'A' as approved by GE

S&F in repair of glass shelf of size 450mmx150mmx8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified.

S&F in repair of corner glass shelf of size 300mm dia and 8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified.

S&F in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : Cera/Prayag or of equivalent make as per Appx 'A' as approved by GE

S & F in repair brass chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE

S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Johnson Fusion series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE

S&F in repair brass chromium plated towel ring all as specified and directed. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs bip taps standard of PTMT any colour 15mm bore min wt 90gms Make: Prayag or equvalent of ISI marked

S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make : Johnson Magna series Cat part No: T2804C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make: Johnson VIVA new series Cat Pt No: T4801C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR Fusion Series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Johnson Eco Cat part No: T3910C or of equivalent

S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent

S&F in replacement 75/100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified.

S&F for rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. Make: Sintex, Polycon, Rotex

-Ditto- all as per item No 81 here in before but 1000Ltrs capacity complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.09 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified.

M&L for non skid ceramic joint free tiles 7-8mm thick (square/ rectangular) polished, area of each tile exc 0.11sqm but n.exc 0.16 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing floors over 15mm thick screed bed or bedding of layer in CM 1:6 complete all as directed.

-Ditto- all as per item No 85, here in before but wall surfaces for skirting/ dado of the wall surfaces match with floor tiles over 10mm thick cement plaster in CM 1:4 complete all as directed by Engr-in-Charge

M&L for glazed ceramic tiles in vertical surfaces 450x300x7-8mm thick cement slurry and pointed in white or coloured cement to match with existing floors on10mm thick plaster in CM 1:3 complete all as directed.

M&L coloured vitrified ceramic tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18sqm but not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified.

Ditto- all as per item No 88, here in before but wall surfaces for skirting/ dado of the wall surfaces match with floor tiles over 10mm thick cement plaster in CM 1:4 complete all as directed by Engr-in-Charge

S&F 15mm bore tubes med grade galvanized ISI marked with all fittings in short length and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing as specified.

All as per Srl item No 90 here-in-before, but taking down and fixing only

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings in short length and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing as specified.

All as per Srl item No 92 here-in-before, but taking down and fixing only

S&F in repair 20mm bore gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed. Make:ISI marked

S&F in 15mm dia of bore PVC connection fixed with iron pipe with PTMT nuts in 450mm long Make:Prayag/Polytuf

Ditto- all as per item No 95 here in before but 600mm long

S&F in repair plastic closet seat white closed pattern with flat bottom and cover and mild asteel chromium plated hinging device for pedestal pattern WC/semi pedestal and WC (anglo indian type) complete all as specified and directed.

S&F in repair PVC tank cover of PVC water storage tank of any capacity complete all as directed Make:Sintex/Polytuf

S&F in repair 32mm dia PVC waste pipe for WHB, kitchen sink of length 1.0mtr incl coupling incl fixing the same complete all as specified and directed Make;Prayag or ISI marked

S&F for factory made 50mm thick, 950mmx650mm manhole cover with additional frame for fixing, of fixing of pre cast RCC 1:2:4 type B-1 (using 20mm graded agg) finished the surface even and fare including reinforcement MS TMT bars 8mm dia @ 125mm centre to centre bothways and set in CM 1:4 and handles including demolition of RCC (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

-Ditto- all as per item No 101, here in before but 600mmx450mm size complete all as directed

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in Charge

S&F for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, frame work for water staging and like to similar work etc confirming Fe 410-W (Gde- E-250) quality B complete all as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge

Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all specified

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified

-Ditto- all as per item No 107, here in before but plain sheet on ridges complete all as specified

Removing of vegitation/plantation on the wall, roof or any description upto three stories of building including necessary scaffoldings and roots superficial area n.exc 2.0sqm each and making good of surfaces by applying chemical treatment with GLYPHOSATE 41% incl removing / refixing of GI/CI pipe lines complete all as directed. (Note:Brick work, plaster and CI/GI lines shall be measured and paid separately)

Dismantling fencing wire mesh in any type complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed

Excavation of post holes (or similar holes) each n exc 0.5cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm for soft/loose soil complete all as directed

S & F Mild steel work for posts and struts in fencing of angle iron including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and direced

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc complete all as specified and directed

M&L for mild steel round bars10 mm dia and over, cut to length, bent to shape required, for stiffners and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05cm and n exc 10cm long, diameter of neck 5 to 10mm complete all as specified and as directed

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd (BID ID -3061563)

M/s Akshay Contruction (BID ID -3062367)

K.K.Enterprises (BID ID -3060098)

A.S.ENTERPRISES (BID ID -3062200)

M/s Asrani and sons (BID ID -3067876)

M/S Eknath agencies (BID ID -3062473)

VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD (BID ID -3062244)