Work of reconstruction of Drum level header in Unit 9

Re-construction of drum level header{ High pressure & Temp (Left & Right)} of size 1200 mm length after removing of existing header of size 500 mm by way of taking Zero level measurement, cutting & welding as per scope of work.

Erection of Flow meter and indicator at W.T.P by way of cutting of 400 mm dia pipe (I.D), thickness 7 mm/ Actual thickness , mounting of 02 No. Flange by way of cutting & welding and related work as per scope of work.

Erection of Flow meter and indicator at W.T.P by way of cutting of 500 mm dia pipe (I.D) , thickness 4.78 mm/ Actual thickness , mounting of 02 No. Flange by way of cutting & welding and related work as per scope of work.

Erection of Flow meter and Indicator at W.T.P by way of cutting of 600 mm dia pipe (I.D), thickness 7.3 mm/Actual thickness, mounting of 02 No. Flange by way of cutting & welding and related work as per scope of work.

Digging of trench of size 600 mm X 600 mm by cutting of road and nearby area and Laying metal pipe of 100 mm/Available size inside trench and refilling trench for passing control cables for Flow meters as per scope of work.

Fabrication of Protecting shed of size 1500 mm X 1200 mm and height 150 cm/ as per side requirement by Fabricating structure, grouting of M.S angle to protect Flow meters at W.T.P and painting of shed with red oxide & smoke gray paint etc as per scope of work.

Erection of Conductivity meter and Indicator at WTP and Fabrication of conductivity probe stand by cutting and welding as per scope of work.

Laying of control cable of size 2C to 5C X 1.0 mm / Available size from flow meters to W.T.P control room and terminating at both end with proper lugging and ferruling as per scope of work.

ALOK ENGINEERING

INSTRUMENT ERECTORS