COMPREHENSIVE SERVICES TO VIVEK VIHAR COLONY AND REPAIR AND MAINT OF INTERNAL ELECTRIFICATION AND OTHER MISC WKS AT VIVEK VIHAR COLONY UNDER GE (WEST) LUCKNOW

Amount

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and fair complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and as directed.

Supply and fixing of 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and as directed.

Supply and fixing of 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and as directed.

S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and as directed.

S&F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and as directed.

S&F in repair two way angle valves 15mm bore, fancy type, cast copper alloy, matt chrome finish with wall flange, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore mixer Pillar taps half turn, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15 mm bore Pillar taps (Swan neck type) half turn, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and as directed.

Supply & Fixing in repair CP shower rose fancy type 125mm thick with or without swivel joints any size including fixed to steel pipe or union complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repair PVC low level white flushing cistern valveless syphonic action dule type capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend complete all as specified and as directed.

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and as directed.

Supply & Fixing in repair sink without drainage board size 560x410x200 mm made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and as directed.

S & F in repair stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel of size 900x750x250 mm including screws and weight not less than 5.00 Kg complete all as specified and as directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and as directed.

S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, with plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated hinging deviceincluding connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed.

M&L in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repair float ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and as directed.

S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank complete all as specified and as directed.

S&F in position rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank complete all as specified and as directed.

S&F in repair 25mm dia stainless steel curtain rod, superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of wall and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of wall and applying subsequent coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of New plastered surface of walls and applying two coats of oil bound distemper over and incl one coat of wall care putty complete all as specified and as directed.

M & L for old plastered surfaces of walls and applying one coat of oil bound distemper including preparation of surfaces complete all as specified and as directed.

M & L for old plastered surfaces of walls and applying subsequent coat of oil bound distemper complete all as specified and as directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and as directed.

M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and as directed.

Material & Labour for preparation of old plastered surfaces of finished walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. Note- Primer and emulsion to be carried out through air less spray machine ( Mechanical means)

S & F for coloured glazed ceramic tiles of size ( 450 x300mm ) x 7 to 8 mm thick and joints in neat cement slurry and pointed in white or colours cement to match with existing wall or vertical surface laid over & including 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and including dismantling of lod floor hearth or wall tiling including cement mortar bedding but not backing and removing sreviceable tiles to store yard and rubbish off the premises complete all as specified and as directed.

S & F for Non-skid coloured ceramic tiles size (300 x 300mm & 400 x 400mm) x7 to 8 mm thick (square) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including screed bed or bedding layer 15 mm thick in cement mortar 1:4 and including dismantling of old floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and as directed

S & F for double charged any shade vetrified ceramic tiles 7 to 9 mm thick (square/ rectangular) polished area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including screed bed or bedding layer 15 mm thick in cement mortar 1:6 and including dismantling of old floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.6 sqm but n.exc 4 sqm each, complete all as specified and as directed.

Taking down Shutters of any description but exc 1 sqm and n exc 2 Sqm each complete all as specified and as directed.

M&L Pressed steel door frame of size 105 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L Pressed steel door frame of size 125 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and as directed.

S & F of factory made 35 mm thick panelled shutter, solid core construction with block board core and ply wood panels of commercial type on both side complete all as specified and as directed.

Supply and fixed 35mm thick factory made hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded, fitted without sash barss complete all as specified and as directed.

S & F in repair 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading or welding fitting in steel/ wood window etc complete all as specified and as directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100mm x 8 mm sheet metal CSK screws complete all as specified and as shown on drawing ( Note :- Door frame shall be water proof , termite proof elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and as directed.

Solid PVC profile door shutter of 28 mm thick rails and stiles of extruded 71 x 14 mm wide, made of solid PVC extruded profille with a fine homogeneous cellular structure having smooth surface. 5 mm thick PVC foam sheet is laminated on both side with .25 mm rigid PVC sheet) PVC sheet is used as panel. Primeredd MS frame of size 40mm x 20mm is provided for extra strength PVC panel, stiles rails are joined together using solvent cement adhesive. All corners of PVC profile are first mitre cut and then fusion welded complete all as specified and as directed.

Supply & fix Stainless steel Butt hinges "medium weight" cold rolled 100mm size complete all as specified and as directed.

Supply & fix 200mm long alumunium anodised barrel tower bolts of extructed section as directed.

S&F aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and as directed.

S & F of 100mm size Extruded aluminium alloy handles fancy type, fabricated type, anodised complete all as specified and as directed.

S&F in repair 3 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and as directed.

M&L preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S & F Powder coating Anodized aluminium frame for doors, windows with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc complete all as specified and as directed.

S & F powder coating anodized aluminium glazed window shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 02 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles in each shutter complete all as specified and as directed.

S & F powder coating anodized aluminium glazed ventilator shutter half portion fixed with figured glass and other half portion with movable louvred complete all as specified and as directed.

Repairing/ easing to anodized aluminium glazed window shutters/ doors any type window side hung shutter including fixing of left or right handle, casement stay 300 mm long , tower bolt and glass repair complete all as specified and as directed.

Providing and laying of 75 mm thick hard core broken stone/ boulders to gauge n exc 63 mm complete all as specified and as directed.

M&L for 75 mm thick Cement concrete PCC 1:3:6 type C-2(using 40 mm graded granite stone aggregate) in sub base of flooring complete all as specified and as directed.

M&L 30mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Providing and laying in repair of Machine pressed precast concrete rouber moulded interlocking paver block any shape, any colour and size of 60mm thickness, M-35 Grade PU coated complete all as specified and as directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains, soak well etc and similar articles etc, set in CM 1:6with plain faces including chamfered weathering throating etc incl necessary form work and including demolition of old reinforced concrete of any description in any postion not otherwise specifically provided far complete all as specified and as directed.

S&F for mild steel deformed bars or TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Cleaning of soak well upto 2.4 m dia, 6 m depth (liquid depth) using mechanical pumps diesel driven with fuel, operator and necessary excavation on half buried night soil and disposed off soak well water etc in pits including necessary excavation and earth work for pits for burrying the night soil etc in soft/loose soil complete all as specified and as directed.

Cleaning/disludging of existing septic tank of any capacity/sump well of any dia and depth incl taking out sludge in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc means of sewage sucking machine or by way of any other suitable means and removing the sludge outside MD land by any means complete all as specified and as directed. Note: The sludge/burried soil etc taken out shall be stacked alongwith the septic tank, sump well etc. After 48 hours of the sludge taken out, measurement shall be taken as of the solid contents for the purpose of payment. The tenderer are advised take up this aspect in mind while quotating the rates. After taking measurements, the solid contents shall be disposed off outside the MD land/area

M&L for cleaning of sewer line upto 200 mm bore pipe, of any depth, of any location, manhole of any depth, section, size between the sewer lines sewer line to septic tank/soak well/sump well by means of sewage sucking machine or by way of any other suitable means including disludging foreign material, sand, ashes, fibre, silt, grease, night soil, etc and removing the taken out sludge/material out side MD land by any means/source keeping the sewage line functional of the pipe lines, complete all as specified and as directed.

M&L for cleaning of manholes any depth of any loc, section after cleaning trap, wc, soil/vent pipe gully trap upto and incl first manhole manually or mechanically or by way of any other suitable means or by rodding between trap and manholes incl disludging foreign material sand, ashes, fibre, silt, grease night soil etc and removing the taken out sludge/material outside MD land by any means/sources keeping the sewer line /manhole functional complete all as specified and as directed. Note:- For item No. 29 to 32 : (i) Necssary precautions as well as safety measures shall be taken by the contractor without any extra cost, for working in the foul conditions. (ii) The contractor shall be enterily responsible for the lapse, mishappening to any of the manpower deployed and/or to other equipment/machinary/material at the site of work during the execution. (iii) The work shall be executed with all safety measures under the supervision of highly skilled workman/supervisor without entering into the septic tank, manhole, sludge chamber etc

Taking up broken existing sewer line of any depth and replacing sewer pipe with SGSW pipe 150mm bore including jointing of pipe in CM 1:1, haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40mm graded brick agg incl necessary excavation and earth work, disposal of material up to a distance of 50mtr and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified and as directed.

Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab of area n.exc 2.5 Sqm in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROFF LW of Dr Pidilite as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of Dr fixit and grouting around the inserted pipes byu porable Dr fixit bath seal grout as directed. (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit as per amnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with Dr. Fixit sealing compounds complete.

S & F in repairs Brass spindle for mixer/wall mixer/CP tap of any type or pattern complete all as specified and as directed.

S&F kitchen PVC cabinet and cupboard in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick pvc sheet & provision of shutters made out of 18 mm thick one side decorative laminated PVC sheet all required brackets 5.5screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finishincluding all necessary fittings as per site requirementand as per make and specification mentioned as per drawing and complete all as specified and as directed.

S&F ball cateches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and as directed.

S & F of 100mm size Extruded aluminium alloy handles fancy type, fabricated type, anodised complete all as specified and as directed.

Supply and fixing 30 mm width of flaps continuous piano hinges Stainless steel, bright finish or electroglavanised complete all as specified and as directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and as directed.

Taking down carefully main switches, DB's, MCB DB's of any way or rating and making good the disturbed surfaces of walls complete all as specified and as directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and as directed.

All as per item No 84 above but for one 5 pin 5 Amp socket outlet point on an independent board complete all as specified and as directed.

All as per item No 84 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch complete all as specified and as directed.

All as per item No. 84 above but for One bell/ buzzer point on an independent board controlled by one bell push complete all as specified and as directed.

All as per item No. 84 above but for One light point controlled by two way two switch complete all as specified and as directed.

All as per item No 84 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm complete all as specified and as directed.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and as directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and as directed.

S&F Switch piano, flush type, single pole, two way 5/6 Amp 230 Volts complete all as specified and as directed.

S&F socket outlet, flush type, single pole, multipurpose 2in1, 5 pin 5/6 Amp, 230 volts complete all as specified and as directed.

S&F socket outlet, flush type, single pole, multipurpose 2in1, 5 pin 15/16 Amp, 230 volts complete all as specified and as directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and as directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F bell push, flush type, single pole, one way 5/6 Amp, 230 volt flush type complete all as specified and as directed.

S&F in repair call bell, ding dong type, AC single pole, 230 volt complete all as specified and as directed.

S&F sheet metal enclosure for VTPN DB double door type, 4 way, suitable for 4 pole MCCB, 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCCB/ MCB and with enclosure blank plates for unused way complete all as specified and as directed.

S&F sheet metal enclosure for MCB DB double door type, tripple pole and neutral 4 way, 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and as directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and as directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and as directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.

S&F MCB, single pole & neutral 40 to 63 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.

S&F MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.

Supply and fixing modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F in repair ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and as directed.

S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and as directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in repair wall mounted 20/22 W LED integrated tube light fitting, 1200mm long batten with extruded aluminium housing, frosted diffuser and integrated electronic driver with decorative end cap complete and one no 20/22 W LED 6000K, 230V, tube light complete with all required fittings and fixtures arrangement including and provn of connection from ceiling rose to luminaries with PVC 3 core flexible copper wire complete all as specified and as directed.

S&F in repair wall mounted 10/12 W LED integrated mirror light fitting, 600mm long batten with extruded aluminium housing & integrated electronic driver and one no. 10/12 W LED, 6000 K, 230V, 100 lumens/watt, tube light including and provn of connection from ceiling rose to luminaries with suitable size three core flexible copper wire complete all as specified and as directed.

S&F in repair 1200mm long wall mounted decorative batten only suitable for 18/20 W LED tube light fitting with extruded aluminium housing, frosted diffuser, integrated electronic driver with decorative end cap complete with all required fitting arrangement including and provn of connection from ceiling rose to luminaries with PVC 3 core flexible copper wire complete all as specified and as directed.

S&F in repair 1200mm long 18/20 W ultra bright crystal LED tubelight, 6000 K, 230V with high efficiency, suitable for tube light fitting with all required connection complete all as specified and as directed.

S&F in repair security light fitting of 24/25 W LED 6000 K, with high power LED source (more than 110 lumens/ watt), PDC housing, IP65 and IK 07 with 4KV inbuilt surge protection driver and one no. 24/25W LED tube, with all accessories, prewired with and fixed to bldg/pole including GI bracket 1.20m long bent to shape, made out of 25mm dia GI light grade pipe with nuts, bolts and washers and provn of connection from ceiling rose to luminaries with PVC 3 core flexible copper wire complete all as specified and as directed.

S&F in repair integrated LED Post top lantern with high power 25/30 W LED as light source, energy saving, envioronmental friendly, long life asethetically designed with symmetrical light distribution, spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection complete all as specified and as directed.

S&F in repair surface type round LED 12W downlighter of dia 160mm as required complete all as per specified and directed.

S&F in replacement LED bulb 7/9 W, B-22 base, 6000K complete all as specified and as directed.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia (7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and as directed.

S&F BLDC ceiling fan 1200mm sweep with powder coated aluminium blades min air delivery 220m3/min , poser consmption 26 watt, star rating (BEE) 5 star, 350 RPM with down rod as per site requirement alongwith connected accessories incl provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan, min 2 years procuct warranty and 05 years motor warranty complete all as specified and as directed.

S&F in replacement heavy duty metal body exhaust fan 300mm sweep, copper wound, 1400 RPM, AC single phase, 230/240 volts, fancy type complete with fan motor, blade, bracket, ring and louvers including and provn of grouting 4 nos anchor bolts with nut and washer and making good to disturbed surfaces to match the existing and provn of connection with with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and as directed. Make: Orient (Heavy duty)/ Usha (Turbo heavy duty metal body)/ Havells (Turbo Force HP)/ Khaitan (heavy duty metal body). NOTE: Old unserviceable fan shall be deposited to EM store yard.

Opening/ taking down electrical board/ fittings/ fixtures excluding light fittings to identify complaint pertains to internal electrification of any type and nature in Md Accn buildings and rectifying the same like of faulty electric circuits, tightening of loose wiring/ conduits, replacement of defective switch, socket, bell push, lamp holder, fan regulator, copper wire of different sizes, LED bulb, replacement of broken hylam boards, call bell, ceiling fan/ exhaust fan, condensor etc complete all as specified and as directed. NOTES: (i) Cost of minor stores such as screws, clamps, insulation tapes, nuts/bolts etc shall be deemed included in the above quoted item. (ii) Spares such as switch, socket, bell push, lamp holder, fan regulator, copper wire, LED bulb, hylem sheet, call bell, fan condensor shall be paid seperately under respective items as supply only.

Supply only Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and as directed.

Supply only Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and as directed.

Supply only socket outlet, flush type, single pole, multipurpose 2in1, 5 pin 5/6 Amp, 230 volts complete all as specified and as directed.

Supply only socket outlet, flush type, single pole, multipurpose 2in1, 5 pin 15/16 Amp, 230 volts complete all as specified and as directed.

Supply only bell push, flush type, single pole, one way 5/6 Amp, 230 volt flush type complete all as specified and as directed.

Supply only angle type lamp holder PVC/ Polycarbonate type with back plate complete all as specified and as directed.

Supply only fan regulator, electronic, step type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and as directed.

Supply only call bell AC single pole 240 volt Musical Type complete all as specified and as directed.

Supply only 3mm thick plastic laminated bakelite sheet top cover (Make- Hylum) of size 10"x12" including cutting for fixing of switch, socket etc. complete all as specified and as directed.

Supply only 3mm thick plastic laminated bakelite sheet top cover (Make- Hylum) of size 8"x10" including cutting for fixing of switch, socket etc. complete all as specified and as directed.

Supply only 3mm thick plastic laminated bakelite sheet top cover (Make- Hylum) of size 8"x5" including cutting for fixing of switch, socket etc. complete all as specified and as directed.

Supply only 1100 volts grade 1.50 Sqmm single core multistandard PVC insulated unsheathed copper cable (90m bundle pack) complete all as specified and as directed.

Supply only 1100 volts grade 2.50 Sqmm single core multistandard PVC insulated unsheathed copper cable (90m bundle pack) complete all as specified and as directed.

Supply only 1100 volts grade 4.0 Sqmm single core multistandard PVC insulated unsheathed copper cable (90m bundle pack) complete all as specified and as directed.

Supply only twisted twin core flexible wire of size 23/0.0076 complete all as specified and as directed.

Taking down ceiling fan of any sweep, replace the unserviceable parts and refixing the same after necessary repair with provn of new twin core twisted PVC insulated multistranded flexible copper conductor cable of size 23/0.0076 from ceiling rose to fan complete all as specified and as directed. NOTE: (i) Rewinding of fan shall be measured and paid separately under respective item. (ii) The rates shall be deemed to be inclusive for replacement of unserviceable parts bearings, capacitors, bushes etc. (iii) New parts like bearing, capacitors, bushes etc shall be paid as supply only.

All as per item No. 136 above but exhaust fan of 230/300mm sweep including and provn of replacement of nut, bolts and washer complete all as specified and as directed.

M&L for cutting & removing the burnt winding of ceiling fan of 1200/1400mm sweep, cleaning the slot properly, rewinding with super enamelled copper wire of suitable size, varnishing, heating and insulating and re-assembling the spares complete all as specified and as directed.

All as per item No.138 above but for exhaust fan 300mm sweep complete all as specified and as directed.

M&L for preparation of old painted surfaces of ceiling fan of any sweep and applying two coats of synthetic enamel paint by using spray gun including taking down and refixing in same location complete all as specified and as directed.

M&L for preparation of old painted surfaces of exhaust fan of 300/450mm sweep and applying two coats of synthetic enamel paint by using spray gun including taking down and refixing in same location complete all as specified and as directed.

Supply only bearing No.6201/6202 for ceiling /Exhaust fan complete all as specified and as directed.

Supply only bearing No.6203/6204 for ceiling/ Exhaust fan complete all as specified and as directed.

Supply only fan condensor 2.5 mfd complete all as specified and as directed.

Supply only fan condensor 1.5 mfd complete all as specified and as directed.

Supply only gun metal bush of any size complete all as specified and as directed.

M&L provn of mounting clamp assembly complete for ceiling fan 1200mm/ 1400mm sweep with clamp, bolt, nut, washers, safety/split pins and rubber bush etc complete all as specified and as directed.

M/s JP Constructions

M/s Vivek Traders

M/s Chandra Mohan and Sons

M/S SWATI CONSTRUCTION

EVEREST CONSTRUCTION