REPAIRS TO JOINERIES AT CQA (SV) ALKAPURI UNDER AGE B/R (EAST) AT GE DEHU ROAD

Amount

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.

Ditto as above but n'exc 1.5 Sqm each.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S&F 30mm thik flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm.

Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick.

S&F Anodised aluminium Powder coating frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insulation 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

S&F Anodised aluminium window and ventilator shutters,(three track) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S&F 3.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

S&F in repairs 10 mm th toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and directed by Engr-in-Charge

S&F in repair stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S&F in repair 4.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

Supply only 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

Supply only 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

Supply only 100 mm aluminium, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

Supply only 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

Supply only 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets , refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.)

Petty repairs to Aluminium joinery works such as Aluminium Door, Alumnium Windows, Aluminium Ventilators and like similar works such as easing of doors, refixing of door, windows, refixing builder hardware such as Aluminium beading to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.)

S&F in repairs 20 mm dia anodised aluminium anodised powder coated tubular curtains rod including fixing brackets complete all as specified and directed.

Supply only floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

S&F in repairs 3.00 mm thick figured glass pin head type obscured or frosted on one side and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 500 ltr but n exc 1000 ltr complete all as specified and directed.

S&F in repairs including disconnecting tanks ,1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repairs including disconnecting tanks ,500 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supply only 75 mm long butt hinges, extruded aluminium alloy with galvanised aluminium hinge pin, anodised, type C 21, all as specified and as directed .

Supply only 100 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply only 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply only 100mm long extruded alluminium alloy handle, cast type, anodized all as specified

Supply only 150mm long extruded alluminium alloy handle, cast type, anodized all as specified

Supply only 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified

Material and labour for Welding in repairs exc 2.5 cm in length , thickness of Metal to be welded exc. 9 mm but not exc. 20 mm complete all as specified and as directed

S & F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification

S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe.

S & F in repairs pillar taps fancy type ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe.

S & F in repairs Brass cromium plated with capstan headsshower rose of 125 mm dia complete all as specified.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.)

Demolition & breaking up drain pipes (SWG, AC, RCC etc) set in CM int dia of pipe 100mm with all fittings .

.- ditto - all as per item No. 47 above but 75mm dia pipe with all fittings.

S&F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 110mm dia pipe

S&F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 75mm dia pipe

S&F PVC (SWR) bend 110 mm dia all as specified and directed

S&F PVC (SWR) bend 75mm dia all as specified and directed

Supply only 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

M & L in repairs 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed.

M & L in repairs 18 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete

M & L for rendering 15mm thick in CM (1:4) on brick and concrete surfaces finished even and smooth without using extra cement

M&L for two coats of oil bound distemper over one coat of Priming plastered and other surfaces with alkali resistan priming paint on newly plastered wall surfaces including preparation all as specified and as directed.

Material and labour for preparing surfaces of steel and iron surfaces, new or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

Material and labour for preparing surfaces of wooden surfaces, new or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

Supply only 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

Material and labour for providing cement concrete 1:3:6, type C1, using 20 mm graded stone aggregates as in bed blocks for fixing hold fasts etc., complete all as specified and as directed .

Providing and carrying out water Proofing treatment to toilet, sunkan slabs, wet areas ets, after proper surface prepration, carry out cementitious injection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete including 15mm thick cement plaster in CM 1:4 all tools and plant as per manufacturers specification including removal and refixinf of fixtures complete all as specified and directed.

M&L cement concrete type E-2 1:5:10 using 40mm, graded brick agg as in sub base.

S & F in repairs CP grating 125 mm round fixed on floor / nahani trap fixed with 1:1 CM complete

M&L PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore dia

Dismantling MS works of any Desc. Not otherwise provided for

S&F Tubular Sections as in main cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)

S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.

S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete.

All as per above above but plain sheet fix in valley gutter / ridge

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M & L 75 mm thk Cement concrete type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

M& L Chequered Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

S & F in repairs Kitchen plate rack made of stainless steel 0.8mm thick complete of size 76 cm x 60 cm, duly assembled and fixed to the wall with wall screws/ fasteners all as specified and as directed. Make : Butterfly or equivalent

M & L Preparing old decorated plastered of wall of painted surfaces applying one coat of cement paint complete all as specified and directed.

M & L complete removal of existing treatment of painted surfaces applying two coats of cement paint complete all as specified and directed.

M&L for prepartion of old plastered surface of wall applying one coat of weatherproof acrylic emulsion exteroir grade paint on external surfaces complete all as specified.

H S TAKHI (BID ID -3158393)

S Y Itkar Construction and Company (BID ID -3158395)

M/S B.A. GAIKWAD (BID ID -3158514)

M/S RENUKA CONSTRUCTIONS (BID ID -3158889)

RAMESH PATIL (BID ID -3163498)

Crown Chemicals (BID ID -3159204)

KARPE AND SONS CONSTRUCTION (BID ID -3158373)