PROVN OF LADIES TOILET IN STN HQ, UPVC WINDOWS AT MD ACCN,CERTAIN B/R WORKS AT CERTAIN OTM, INTERLOCKING TILES NEAR SPORT COMPLEX, ADDN/ ALTN TO BLDG NO P-17(KUTEER) AND WALL PANELLING/CEILING AT CERTAIN LOCATIONS AT OFFRS MESS AT AFS KANPUR

Amount

M & L for 200x1000mmx9mm thick Ceramic wooden planks/Tiles of rectangular in size fixing over and incl 20mm thick screed bed in CM 1:6 including taking down the existing tiles flooring and removing the debries out side of MD Land complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick cement mortar 1:4 complete including taking down old one complete all as specified and d

M&L non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed bed in CM 1:6 including taking down old one complete all as specified and directed..

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as directed.

Ditto all as per item No.4 here-in-before but exceeding 1.5 sqm and not exceeding 4 sqm each.

Providing and fixing factory made uPVC white colour sliding windows, area nexc 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (One vertical lenght in each shutters) (45m5 mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minius mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasterners. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) complete all as speificed and directed

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. The builders hardware such as locking device, tower bolts ect shall not be paid separately .

All as per item No 7 here-in-before but area exc 2.00 Sqm and n.exc

S&F 6.00 mm thick tougened frosted glass fixed with PVC beads and necessary clips etc for fixing in UPVc windows/doors complete all as speificed and directed

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window -cills cooking platforms and like in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 20-25mm thick heavy duty designer type parking tiles of size 300x300mm of choice colour fixing over and 20mm thick screed bed in CM 1:6 complete all as specified and directed

S&F of Ventation blinds for windows of choice colour the witdh of strip not less than 0.10 mtrs complete all as speciifed and directed.

Supply and fixing factory made uPVC any colour fixed/top hung glazed window/ventilators (One with glass shutter and another wire mesh shutter. Both shutter shluld be top hung made of (small series frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 plus minus 0.2 mm and single glazing bead of appropriate dimension (area up to 0.75 Sqm) comprising of uPVC multi-chamberedframe and mullion (where ever required) extruded profiles duly reinforced with 1.6 plus or minius 0.2 mm thick galvanized mild steel section made from roll forming, process of required length (shape and size accoring to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gazket, GI fasterners 100 x 8 mm size for fixing frame to finish wall, plastic packers, plastic caps and necessary stainless steel screws etc profile of frame shall be mitred cut and fusion welded at all corners, lussion (if required) shall be also fusion welded including drilleing of holes for fixing of hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with wather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. Note : (i) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile demension in higher side shall be accepted but no extra payment on this account shall be made. Hardware : Cost of Stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories will be included in quoted rate and glass will be measured and paid seperately. Net opening will be measured for payment purpose).

S&F 5.50 mm thick ordinary glass n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F for framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410W(Gde-E-250) quality 'A', complete all as specified and directed.

M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Light shade Virified Ceramic tiles (10 mm thick) (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc over and incl15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

A ll as per item No 18 but as in dado/skirting etc over and incl 10mm thick plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling of wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

S & F for 12mm thick false ceiling at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 X 595 mm of approval texture design and patterns having moisture content less than 2 %, humidity resistance of 99 %, NRC 0.50 to 0.75 as per IS 8225 : 1987, Noncombustible as per BS 476 (Part-4)- 1970 and light reflectance of 85 % (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 1200mm and secondary intermediate cross -T of size 15 x 32 mm of length 600 x600 mm, suspended from ceiling using galvanised mild steel items (galvanised @ 80 grams per Sqm), 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x25x2 mm galvanised iron perimeter of size 24 x 24 x 0.40 mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws all as specified and directed by Engineer-in- Charge,.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F 12 mm toughen glass door shutter size (1.22 x2.15) mtr with frame including glass fitting accessories top pivot bottom patch top patch,2 H type handles,patch locks,clamps,connecters and rails etc with taking down existing one complete all as specified and directed

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Demolition of brick work built in Cement Mortar complete all as specified and directed.

M & L brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or stone masonary in CM (1:6) finished fair and even without using extra cement and applying two coats of OBD over one coat of primer and 2mm thick wall care putty complete all as specified and directed.

S&F of Solid PVC Wall Lining/panneling on wall/ceiling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. Note: The colour and desing for wall panneling shall be approved with Garrion Engineer prior to finxing.

M&L for surface excavation n. exc.15 cm deep in soft/loose soil, complete all as specified and directed.

M&L for hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface using broken stones or boulders, complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

Providing and laying 60mm thick factory made hamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in otparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S & F Machine pressed precast conrete kerb stone of size ( 450 X 300 X 150 )mm as in kerb complete all as specified and directed.

Removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point in soils, complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

M & L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M & L Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 as in half bricks complete all as specified and as directed.

M & L for RCC Nominal Mix type B1 1:1.5:3(20mm graded) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L for RCC Nominal Mix type B1 1:1.5:3(20mm graded) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M & L for RCC Nominal Mix type B1 1:1.5:3(20mm graded) as in Columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for RCC Nominal Mix type B1 1:1.5:3 (20mm graded) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregates) as in copings, ,bed plates and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M and L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and as directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finish surfaces complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished flat surfaces complete all as specified.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide , horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces of concrete complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L Mild steel TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Filling under floor incl spreading and levelling, watering and well ramming in layers n exc 25 cm thick with excavated material complete all as specified and as directed.

M&L for 100 mm thick cement concrete type D- 2, 1:4:8 ( using 40mm graded aggregate) as in sub base complete all as specified and as directed.

M & L for precast cement concrete 1:2:4 type B-0 as in louvres and jallies, 25mm thick set in cm 1:4 (measured solid), including all mouldings but excluding frame complete all as specified and as directed.

M&L for 30mm thick plain factory made single extruded WPC solid fixed type ventilator with frame size of 75x50mm complete all as specified and as directed.

S & F sheet glass, 3 mm thick ordinary quality and glazing with oil putty/fixed with nails complete all as specified and as directed.

S and F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC prelaimeted Sheet on the front face & 2mm colour PVC prelaiminated sheet on back face, with particle board supplying & fixing in frame at site as per specification

S & F 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F for 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F for 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21complete all as specified and as directed.

S & F for 150 mm long Aluminium handles, cast type, anodised complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 5 mm thick on fair faces of concrete surfaces in cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C- 2, 1:3:6 ( using 40mm graded aggregate) as in plinth protection complete all as specified and as directed.

M&L for preparing new plastered surface of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparing new plastered surface and applying three coats of white wash on ceilling complete all as specified and as directed.

M&L for preparing new plastered surface and applying two coats of cement base paint complete all as specified and as directed.

M&L steel water tubing 15mm bore medium grade with all fittings fixed complete to wall and ceiling or laid in floors complete all as specified and as directed..

All as per item No 68 above but 20 mm dia.

S&F vitreous China wash basin, white or in matching colour of tiles , flat back, size 550x450 mm excluding taps,but including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long( Minimum), chain and plug and porcelain stopper, brackets for fixing any size, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S&F for Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F cabinet mirror of size (500x400) mm Cat No 556 of make Prayag or equivalent in Cera or Essco complete all as specified and as directed.

S&F in repairs toilet paper holder of Chromium plated Cat No BA-58 of Make-Prayag or Cera/Essco complete all as specified and directed.

S&F chromium plated soap dish of Make Prayag cat No BA-45 or equivalent in Cera, Essco complete all as specified and as directed.

S&F corner glass shelf 300mm (with brass brackets) of Cat No BEA-44 of make- Prayag or equivalent in Cera/Essco.

S&F 15mm dia 450 mm long PVC connection including 02 Nos union on both ends screwed for iron pipes complete all as specified and as directed.

S&F bib taps 15mm bore, cast copper alloy, chromium plated , fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F stop valve / angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and as directed.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in CM 1:4 complete all as specified and as directed.

M&L Damp proof course to horizontal or vertical surfaces including necessary formwork 20mm thick in CM 1:2 complete all as specified and as directed.

M&L Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F stop valve chromium plated 15 mm bore fancy type with long shank and cup (concealed type) complete all as specified and as directed.

S&F for Cast iron (sand cast ) soil ,waste and vent pipe 100 mm dia in any length with or without ears fixed in trenches with cement joint complete all as specified and directed.

S&F for Cast iron (sand cast ) soil ,waste and vent pipe 50 mm dia in any length with or without ears fixed in walls with cement joint complete all as specified and directed.

S&F for Cast iron soil, waste and vent pipes 75 mm dia in any length with or without ears, with cement joints, laid in trenches floors or in wall complete all as specified and as directed.

M&L for cast iron floor trap 75 mm dia, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F CI bends 100 mm bore (any radius), fitted with oval access doors diminishing pieces or tapers complete all as specified and as directed.

S & F 50 mm bore cast iron cowl complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S & F 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC Flush pipe complete all as specified and as directed.

S & F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S & F ball valves 20mm high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 1 0 g m s ) complete all as specified and as directed.

S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F for white colour rectangular moulded polyethylene water storage loft 500 ltrs capacity water tank closed top hoisted and fixed in position omplete all as specified and as directed.

S&F Low density polyethylene pipes (LDPE) 32mm bore of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil complete all as specified and as directed.

M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. Note: Water Proofing compound shall be measured and paid for separately as "Supply Only"

Supply only Water Proofing compound

M&L Concrete bed in PCC 1:3:6 type C2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; for 150mm bore of pipe complete all as specified and as directed.

S&F Reinforced concrete pipes, class NP3, laid and jointed complete with collars 150mm dia complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified and as directed.

M&L rendering 10mm thick in CM 1:4 on fair face of brick work or concrete surface including finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:6 on fair face of brick work or concrete surface including fair and even without using extra cement complete all as specified and as directed.

M&L Providing precast ce- ment concrete in PCC 1:2:4 type B-1 inlandings, coverslabs (for man holesetc.) chullahhoods, chajjas, water troughs, mangers, shelvesand similar articleswith plain faces complete all as specified and as directed.

M&L plain Cement concrete PCC 1:2: 4 type B-2 in surface channels and drains complete all as specified and as directed.

M&L Providing, cement concrete In PCC 1:3:6 type C-1 in copings, kneelers, apex stones,bed plates, kerbs complete all as specified and as directed.

M&L for concealed point wiring for the following the PVC insulated and unsheather cable 1.5 sq mm (nominal area) multistranded copper conductor 1100 v FRLSH grade single core including PVC conduit medium grade of appropriate size (not less than 25 mm dia) ISI marked concealed in wall and surface on ceiling complete with all accessories and all as specified including 1.5 sq mm PVC insulated unsheather multistranded copper conductor to common earth and connected to earth dolly for following :- (Note) : 1. The cutting chases shall b finished with cement mortar (1:4) and surface shall be matched with existing surface by using putty, POP etc and applying finishing coat of existing treatment without any extra cost. 2. Rate quoted by the contractor deemed to be included metal flush box of suitable size as required at site and 3 mm thick laminated sheet suitable for mounting of switch and socket etc .

All as per item No. 110 above but One Light Point controlled by one switch

All as per item No. 110 above but One ceiling fan/exhaust fan control by one switch

All as per item No. 110 above but One 3 pin 5 amps socket outlet on the same board with other switches

All as per item No 110 here in before but for one socket out let 2in1 5 and 15 Amps with 2.5 Sqmm PVC insulated copper conductor and provn of 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

S&F switch Piano, 6 Amp, one way complete all as specified.

Supply and fix ceiling rose three terminal complete all as specified and as directed.

S&F socket outlet, 3 pin, 6 Amp, shuttered complete all as specified and as directed.

S&F socket outlet, 3 pin, 6/16 Amp, shuttered complete all as specified and as directed.

S&F switch , 16 Amp, one way complete all as specified and as directed.

M & L energy saving LED 4ft Batten 20 Watt with aluminium housing and a nominal system lumen output of 2500 lumens and a minimum system efficacy of 110 lm/W with fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting complete all as specified and as directed.

Supply and fixing in repair LED batten 9w with aluminium housing and integrated electronic driver complete all as specified and directed.

M&L complete motor assembly of air circulating / ventilator (plastic type) of size 250 mm (10'') complete making all connection from ceiling rose to fans all as specified & directed by Engineer in Charge.

M&L for making circular / rectangular holes suitable for fixing of 10" sweep ventilating Fans by cutting the wall any thickness/ required circumstances for exhaust fan of air and including grouting o rag bolts and nuts complete including finishing of disturbed surfaces by using cement mortar (1:3) complete all as specified and directed by Engineer in Charge.

S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

Supply & fixing, testing and commissioning in replacement of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs fixed in repairs complete all as specified & directed.

-Ditto- all as per item No 125 but of SPN 32 Amps.

S & F sub main wiring for circuit of size 6 sq mm 2 runs (FRLS) alongwith earth wire of 6 sq mm single runs of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC conduit of suitable size complete all as specified and directed by Engr-in-Charge. (for SPN DB 8 way

J.B.ENTERPRISES (BID ID -3470428)

M/s R.V. Constructions (BID ID -3469327)

AMRENDRA CONSTRUCTIONS (BID ID -3471861)

continentalconstructionco. (BID ID -3472222)

M/S SDS Construction Co. (BID ID -3470660)

DHARM ENTERPRISES (BID ID -3472497)

M.M.V. CONSTRUCTIONS (BID ID -3470493)

M/S ASM ENTERPRISES (BID ID -3471784)