Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹10.3 LAccepted-AOC | 1 | Accepted-AOC below | |
| 2 | 2₹10.4 L+₹16,785.30 (1.64%)Rejected-Finance | 2 | Rejected-Finance above |
Tender Value
Refer Docs
EMD Value
₹12,750
Closing Date
29 Jan 2024, 3:00 pmClosed
Executive Officer Thenkarai Town Panchayat
Executive Officer Thenkarai Town Panchayat
Providing Bore Well with Minipower Pump Ward 5 Kaliyamman kovil street,ward 13 kailasapatti kaliyamman Kovil near, ward 9 bharathidasan street and Ward 11 Jallipatty Road Senguttuvan street in Thenkarai Town Panchayat
2024_DTP_411321_1
426-2023
Open Tender
Civil Works
Works
180 days
Providing Bore Well with Minipower Pump Ward 5 Kal
Please refer to the Tender Documents
3 documents required · 3 mandatory
₹0
₹12,750
Yes
Executive Officer Thenkarai Town Panchayat
25 Jun 2025
20 Jan 2024
29 Jan 2024
20 Jan 2024
29 Jan 2024
20 Jan 2024
22 Jan 2024
Amount
Geoligical survey report inculding all other charage etc., complete
Drilling of 150 mm bore well in Hard rock formation using rig including Erection of casing pipes,transportation and fuel charges of Rig to site and all labour charges etc complete.(As per Local market Rate)
Borewell up to 150 M
Borewell From 151 to 180 M
Supply and delivery of 150mmDia blue plain PVC casing pipe(CM) as per standard specification(Cost Excluding Excise duty but Including VAT-Rate as per TWAD Board-2021-2022)
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.
Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3 mts height using MS sheets of size 90 cm x 60 cm (10 gauge) and stiffered with elded silver oak joists of size 10 cm x 6.5 cm spaced at about 90 ce c/c and supported by casurinaprops of size 10 cm to 13 cm dia spaced at 75 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.
Plane Surface
Column Post
Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.
Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.
Brick Work in Cement Mortor 1:5 Mix (one cement, five sand ) using new best country Bricks of size 8 ¾” x 4 ¼” x 2 ¾” from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.
Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm
Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: HDPE Water Tank / EQUIVALENT
Supply and delivery of 32mm dia GI pipe including cost and conveyance all taxes. etc,. Complete.
Supply and delivery of 20mm dia GI pipe including cost and conveyance all taxes. etc,. Complete.
Supply delivery and fixing the Brass chromium plated screw down Tap 15 / 12mm Dia (Heavy Type)
Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc
Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuous rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10%, 50HZ+/-5% (20LPM x 150M as per TWAD SOR 2021-22)
Supply and delivery of direct online starter confirming to IS13947 and IEC60947-1 suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).
Supply and delivery of 2.5 Sqmm flat cable with ISI make including cost and conveyance to site. etc.,complete
Supply and delivery of 32mm dia UPVC - Column pipe pipe including cost and conveyance all taxes. etc,. Complete.
Supply delivery and fixing in Nylon Rope for Bore-well including cost and conveyance all taxes. etc,. Complete.
Supply and run of 2 of 4 sqmm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD 65)
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 70)
Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD 125)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
M. Kalaimani (BID ID -948247)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .