Repair and renovation of Divisional Office by way of Repairs to the existing Toilet in the Premises of Jal Shakti PHE Ground water Division Srinagar Under MnR

Amount

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge, 1:3:6 or richer mix (i/c equivalent design mix).

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead in cement mortar as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. of area of 3 sqm and below complete and stacking within 50 meters lead.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. The work includes removing existing tile work on walls and floors along with the motor/cement slurry and pitching the walls before applying new coat of plaster.

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make. Rectangular shape 453x357 mm

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. Pan with ISI marked white solid plastic seat and lid.

Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.

Cutting chases in brick masonry walls 50 mm dia for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand).

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore B class.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge. PN-16 pipe, 20mm OD (SDR-7.4).

Providing and fixing brass bib cock of approved quality 15 mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20mm NB.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS: 8931.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete for pipes 100 to 250 mm dia meter.

Repairs to septic tank by way of making opening for new connections, reconstruction of manholes of PCC/Brick work after removing rubble/scrap/grass etc. from the septic tank/collection chamber and disposing off the combined rubble up to the lead not exceeding 50m.

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Cutting holes up to 30x30 cm in walls including making good the same with common burnt clay (non-modular) bricks.

Providing and fitting of bathroom accessories as per the directions of Engineer Incharge: a) Electric Water heater ISI Marked, 2000W, SS Tank, 50lit Cap along with all the necessary hardware and fixtures. b) 300x100mm SS Floor trap ................................................. (02 Nos.) c) SS shelf 300x150mm ............................................................. (02 Nos.) d) Flexible connection pipes 24” long .................................. (08 Nos.) e) SS 304 grd Dust bin 20lit cap ............................................. (02 Nos.) f) SS heavy duty Towel rod ........................................................ (02 Nos.) g) Heavy duty Wash basin / urinal waste pipes ................ (02Nos.) h) PVC Main hole covers with frame 300x300mm .......... (04nos) i) SS Tissue holder .......................................................................... (02nos) j) Towel Hanger ............................................................................... (02 Nos.)

Repairs to wooden doors and windows by way of finishing the distorted edges by planner, replacing all hinges, bolts handles and fixing float glass to the window. Painting doors and windows with synthetic enamel paint after application of wood primer. 04 nos doors and 02 nos ventilators.

Providing and fixing of 06mm thick PVC ceiling panels interlock type fixed with rust proof screws and rawl plugs. The job including fixing of L flashing / U beading etc. white colour. Wastages included.

Proving and laying of PVC 100mm dia pipes (B Class PN 6) for sewage outlet including P/F of P/S Traps, bends and allied fittings. The job includes excavation and back filling of excavated earth.

F CON CONSTRUCTION (BID ID -2648374)