SPECIAL REPAIRS TO BUILDING NO - 2 AND 23 AT BOLTON ROAD AT CAW UNDER GE (AF) HAKIMPET

Amount

Demolition of un reinforced concretein ground floors and Pavings not exc 15 cm thick (below or above ground level ) removing debries out side MD land all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),removing debries out side MD land all as specified and directed

M & L for 25mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring finished even and smooth without using extra cement complete all as specified

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes

S&F vitrified Double charged ceramic coloured tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M & L for non skid ceramic coloured /printed tiles 300mm x 300mm, 6 to 7 mm thick, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles.

M&L for rendering to stone masonry surfaces or surfaces other than fair faces of brick surfaces ,15mm thick in cement mortar 1:4,surface finished rough to receive the tiles complete all as specified

M & L for glazed ceramic coloured / printed tiles 350mm x 250mm/ 450x350mm, 7mm thick, as in skirting/ dado set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles.

S&F vitrified Double charged ceramic coloured tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36sqm, as in vertical surfaces such as skirting, dado, risers etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match..

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.removing debries out side MD land all as specified and directed

Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6

Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4

Taking down wooden frame not exceeding 1.5 Sqm each (Without taking off shutters from the frames) and removing to or from store

Ditto all as item No 13 above but exceeding 1.5 Sqm and not exc 4 sqm each

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S & F Pressed steel door frames of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges,steel handle,steel peg stays etc without glazing bars dovetailed or welded. complete all as specifed and as directed.

Ditto all as per item No -17 above but with glazing bars.

S&F Steel ventilators fixed type with glazing bars all as specified and as directed

S&F Steel ventilators with top hung shutters including hinges, steel peg stay etc. complete all as specifed and as directed.

S & F 35 mm thick Second class hard wood plain, framed, panelled shutters (any number of panels), with panels of veneered particle board medium density or wood particle board with commercial face venners complete all as specified & directed by Engr-in-Charge.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 410 - O or Fe 310 - O

M&L for cup board shutters made fromVeneered decorative plywood, grade I, (with BWR resin) decorative veneers on one face any colour/patern and thickness 12mm as specified and required including beadinds and hinges, rollers, handles, catchers and locking arrangement all as directed

M&L for Solid PVC door frame of size 50mm X 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification and drawing.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F 4 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane.

S & F Mild steel hold fasts of flats iron 25X6 mm conforming to Fe 410-O 0r Fe 310-O

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

Supply and fix 300 mm MS ordinary rat rail rod pattern spring including roller and plate complete all as specified.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm.

M & L preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

M & L preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying One coats of Synthetic enamel paint (Ordinary tint) .

M & L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M & L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.removing debries out side MD land all as specified and directed

M&L for rendering 15 mm thick on Brick masonry surfaces other than fair faces of brick work in cement mortar 1:6 and finished smooth and even without using extra cement (Internal)

M&L for 15mm thick plastering on fair faces of brick work or concrete surfaces in two layers with 10mm thick in CM 1:6 and finishing layer 5mm thick in CM 1:4, mixed with water proofing compound at by weight of cement as per manufactures instructions finishing the surface even and smooth without using extra cement. (WPC shall be measured and paid seperately,)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 as in ceiling finished smooth and even without using extra cement.

supply only integral water proofing compound (ISI marked) of approved make

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash.

M&L for preparing old surfaces of Ceiling by brooming down or by steel wire brushing and applying Two coat of white wash.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash.

M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying Two coat of white wash.

M&L for complete removal of any type of existing treatment on wall surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for applying 3 mm thick putty on new and old undecorated wall surfaces to obtain even and smooth finished surface including preparation complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of primer on surfaces of walls.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls.

M & L for taking out old tarfelt over roof, parapets chimneys, stacks etc. and removing the debris to a distance not exc 250 mtr complete all as specified.

S & F 200 x 200 x 20 mm thick terrazzo tiles with up to 12 mm size chips set, jointed and pointed in neat cement slurry as in floors and cut and polished with grey cement and no pigments,

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for over slab of any thickness.removing debries out side MD land all as specified and directed

M &L for cutting out cracks to 'V' section in existing roofs or terrace cleaning out, wetting, grouting with cement and sand slurry1:3 all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in roof padding including finishing the surface even and smooth using extra cement.

M & L for applying/ Brushing neat cement slurry with 3 kg of cement per sqm all as specified and directed

M & L screed bed or bedding layer of 10mm thick in cm 1:4 on concrete surfaces of roof finished fair and even with out using extra cement , using WPC by weight of cement as per manufacturers instructions complete all as specified.

M & L for cleaning the roof surface and applying oil bound bitumen primer @ 0.2 kg/sqm providing and laying 4mm thick APP modified water proofing membrane weight not less than 4kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800 N/sqcm tearing strength 180N with minimum of 10cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over area of membrane complete all as specified and as directed by engineer in charge. Note: the quoted rate shall included for cutting grooves in roof parapets, upward facias, etc and inserting of membrane and making good with CM 1:3 wherever required.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth over stone concrete block or slab

S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings, fixed to walls and ceilings or laid in floors all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings fixed to walls and ceilings or laid in floors.

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs.

S & F 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repair Fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repairs PVC wall mirror cabinet 330mm X 430mm with single door fixed to wall Cat no: 551 of prayag or equivalent as approved.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union

S&F table top basin WHB white 485x370x150 mm. Make : Jaquar model No: SLS-WHT-6901 or equivalent.

S&F CP wall mixture with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges. Make: CAT No.FUS- 29273 UPR of JAQUAR

S & F CP Angular stop cock 15mm Make: Jaquar

S & F SS toilet paper holder with flap make JAQUAR code no.AHS 1553

S & F CP 2 way bib cock. make Jaquar

S & F Stainless steel towel rod of 600 mm long square make: Jaquar Cat No 35721P

S & F Soap dish holder make : Jaquar cat No 35731

S&F full glass shelf of size 500x125mm shelf with brass brackets of heavy duty with front railings with glass fixed in wall with necessary screws. Make : Prayag BEA 45 or equivalent

S & F health faucet with flexi pipe and CP hand shover, length of hose 1mt fitted to the tap. Make : JAQUAR

S&F in repairs Vitreous china wash down water closet pedestal pattern white excluding cistern, seat cover,flush pipe and fixing bolts.

S&F in repairs 10ltr capacity PVC flushing cistern low level white with brackts and connections to pipes fixed in repairs.

PVC water closet seat white closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device

S&F chromium plated heavy duty coat hook having 2 nos of hooks fixed to existing door with necessary screws etc complete all as specified and as directed by Engineer-in-charge

S & F looking mirror of any size rectagular fancy type having bevelled edges/ boarders of glass fixed to walls with stud pins complete all as specified by engineer in charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm

M & L for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and directed

M & L for Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

S & F in repairs Vitreous China Squatting pan of pattern long pan, size 580 mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete including making good to floor.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, 550x400 mm size (flat back or angle back type) in repairs including cutting for and pinning ends of brackets or erecting stand.

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges.

S & F stainless steel plate rack of size780 x 910mm rectangular, 1mm thick including provision of wooden gutties and Make :- prayag Cat P-348

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460mm bowl size 410mm x 330mmx160mm

Dismantling of CI or reinforced concrete drain pipes, joint in cement mortor and taking out of trenches all as specified

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors or trenches or walls

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F PVC (SWR) multi Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.

S & F 75 mm bore PVC (SWR) bends of any radius.

S & F CI 100 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured)

S & F PVC (SWR) vent cowls 75 mm bore.

S & F PVC (SWR) vent cowls 110 mm bore.

S&F 110 mm bore PVC (SWR) junction single, (single T) all as specified and as directed

S&F 75mm bore PVC (SWR) junction single, (single T)with access door all as specified and as directed

S & F 18 Guage stainless steel Railing on stair case having 2" Top Horizontal main rail, 3 x 20mm dia horizontal sub rail, 900mm Height 1.5" Vertical Support left every two steps complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C2 using 20mm graded stone aggregate as in plinth protection/hard standing etc complete all as specified finished smooth and even using extra cement.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for including cutting reinforcement as required to facilitate demolitionand removing debries out side MD land all as specified and directed

M&L RCC 1:11/2:3 type A1(using 20 mm graded stone aggregate) in chajjas, platforms etc and the like.

M & L Form work to Chajjas, water troughs and similar items including edges of flat & fair finished surfaces.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia.

Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, kitchen shelves, manhole cover etc. and similar articles with plain faces and set in cement mortar 1:4

M & L 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth using extra cement.

Glass dividing strips, 38 x 3 mm thick and inserted in position to confirm to design all as directed.

Dismantling water tank of capacity exc 500& n.exc 1000 ltrs

M & L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Mirror polishing and edge rounded all as per specified for steps

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations

Fixing only in orginal position of Rotational moulded PVC water storage tanks 1000 Ltrs capcity (cylindrical vertical with closed top) hoisted and fixed in position and making connection complete all as specified

Fixing only in original position of Rotational moulded PVC water storage tanks 500 Ltrs capcity (cylindrical vertical with closed top) hoisted and fixed in position and making connection complete all as specified

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge.

Taking down and refixing testing Security light of any description including service bracket, clamps nut bolts etc,.

M & L for Point wiring with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn through and including non metalic medium grade, rigid PVC conduit with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings), provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, factory fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, all as specified and as directed for the following:-

(a) One light point controlled by one one way switch .

(b) One ceiling fan point controlled by one one way switch.

(c) One Exhaust fan point controlled by one one way switch.

(d) One 3 pin socket outlet 5 Amps on the same board with other switches.

(e) One 3 pin socket outlet 5 Amps on the Independent board.

(f) One bell/buzzer point controlled by one push button with other switches or independent.

All as per item No.124 here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge.

M&L for Modular switch 6A, 1 way, 1 Module

M&L for Modular switch 16A, 1 way,1 Module

M&L for Socket 6A modular 2/3 pin combined , 2 module.

M&L for Socket 16A modular 2/3 pin combined , 2moduel.

M&L for switch bell push modular,6A 1 Module

M&L for Stepped type fan regulator(4steps), 120 W-2 module.

S&F Electric bell/ buzzer 230 volts, single pole, 240 V.

S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body.

M&L for Lamp holder PVC/ Polycarbonate body with back plate suitable for batten fittings.

S & F for Modular Telephone socket.including taking down

S & F for Modular TV socket.including taking down

M&L for rigid non- metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, sadles, pipe hooks etc. of size 20 mm dia for Tele & TV points.

M&L for Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, painting with synthetic enamel paint by spraying including reassembling blades and hanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan all as specified and as directed.

Dismantling the unserviceable rubber bush with clamping set, supply and fix rubber bush with clamping set, GI bolt, nut and split pin complete all as specified and as directed by the Engineer-in-charge.

Taking down the electric Geyser of capacity 25 ltrs/ 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections, dismantling the unit and painting with one coat of synthetic enamel paint and refixing in its original position and reconnecting the inlet/ outlet water pipes and testing on completion complete all as specified and as directed by the Engineer-in-charge.

Sub main wiring complete with two runs of 6.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc. all as specified and as directed. NOTE: Two runs of 6.0 sqmm cable conductor, one run of 6.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.including taking down Old U/S sub main wiring.

All as per item No. 141 above but with 2x4.0 Sqmm + 1x4 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: Two runs of 4.0 sqmm cable conductor, one run of 4.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

All as per item No. 141 above but with 2x10 Sqmm + 1x10 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: Two runs of 10 sqmm cable conductor, one run of 10 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

M&L earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected to & including the galvanized iron strip 32 x 6mm by (upto 7.5m) welding and brought upto 1.0m above plinth protection, including provision of suitable size of light grade GI pipe for protection of galvanized iron strip up to plinth and further connecting with GI wire to distribution boards, including excavation, earth work, Charcoal & salt, 30cms layer of two parts of bentonite mixed with one part BC/loomy/garden soil and four parts of water all around the charcoal, salt mixture all as directed, PCC chamber, RCC cover slab, watering pipe 20 mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt I, including taking down exisiting earthing. NOTE: GI Pipe for earth lead protection will measured and paid in relevant Items.

M&L GI light grade pipe 40 mm dia bore for cable/ protection with fitting fixed to poles / wall / floor / road crossing in trenches etc.including taking down

S & F in repairs galvanished iron 4.0mm dia wire as in earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to wall or any other indicated situation for loop earthing etc. as required.

S&F MCB Distribution board double door type (for incoming MCCB & out going MCBs) TPN 4 way verticle type sheet steel powder painted with bus bar neutral link & earth bar etc. and fixing only of incoming MCCB and MCBs of various rating complete including taking down exisitng DBs including MCCB & MCBs of any type & rating all as specified and as directed by the Engineer-in-charge.

Supply and fix MCB distribution board sheet metal powder painted Single pole & Neutral enclosre with a two pin and earth plug and socket, one single pole MCB of 20 Amps complete including taking down existing DB sheet metal including MCB all as specified and as directed by the Engineer-in-charge.

Supply & fixed MCCB 3 pole, 415V, fixed type, 63 Amps with breaking capacity 16 KA complete all as specified and as directed by the Engineer-in-charge.

Supply & fixed MCB SP 5 to 32 Amps, 240 volts, suitable for fixing in MCB DB 'C' series

Nisa Enterprises

KOGANTI CONSTRUCTION COMPANY

saradhi construction combines

AMK Builders

K LAKSHMAN SINGH AND CO