Special repair works to the Armed reserve, MT office and AR fitting room at PRS campus in Coimbatore City.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

39 : M.s Grills

41 : Painting - New "iron work"

55.2: Supply and fixing of flat back urinal

Electrical arrangements 74: Charges for fixing of fan

ANNEXURE I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Supplying and Filling with crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) Foundation & Basement

b) In Ground floor.

9.2.1.1 : Brick work in C.M. 1:6 using Fly ash bricks of size 230x11x70mm (using crushed stone sand) with admixture a. In Ground Floor

10.2.1.1 : Brick partition work in C.M. 1:4 using Fly ash bricks of size 230x11x70mm (using crushed stone sand) 110 mm tk (B.P.) with Admixture a. In Foundation and basement

b. In Ground Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) with plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand) in C.M 1:2, 10mm tk

29.9.1 : Floor ceramic tiles (antiskid) using Grout (Tile Joint Filler) (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) with plasticizer

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

53.5.2 : Wash Hand Basin of size 550 x 400 mm (without pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

56.3.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a.110 mm UPVC Non Pressure pipe

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

ANNEXURE II A1) Dismantling the Brick masontry walls without afecting adjancent building, and clean removal debris and away from the site a) Walls under 3M height

A2) Remove the existing Mangalore tiled roof without reepers and timbers including cost of labour etc., complete

A3) Reroofing with New Mangalore tiled roof using with new country wood reepers of size 50 X 25mm including cost of c.w.reeper nails including cost of labour and materials etc., complete

A4) Clean removal of the old cement plastering both inside and outside from the existing walls

A5) Removing the damaged broken door/window /ventilators including the removal of frames, hinges, fastenings and shutters form the existing structure and stacking the same carefully for reuse

A6) Removing the damaged Wrought and put up of roof, form the existing structure and stacking the same carefully for reuse

A7) Providing new corrugated G.I. Sheet with necessary 'U' or 'J' bolts screws,nails and bitumen washers including cost of labour and materials etc

A8) Painting the old walls with one coat of Plastic Emulsion including thorough scrapping the old surface

A9) Painting the old walls with two coats of Plastic Emulsion including primer

A10) Painting the old iron work with two coats of approved make of Synthetic Enamel Paint of approved quality and brand including through scrapping the old surface

A11) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose

A12) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. (open Wiring)

A13) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. (open Wiring)

A14) Supplying and fixing of 25W LED Street light fittings with including cost of material, and labour charges for fixing etc

A15) Supply and fixing of 4' 18 watts LED Tube Light

A16) Supply and fixing of 9 watts LED bulb

A17) Supply and delivery, fixing of 0.47mm thick Galvanium sheet roof with steel truess work and fixing by bolt, nuts and painting steel structure including hire charges of tools and plants and fixing in position etc

A18) Supply and fixing of following dia UPVC pipe for water supply a) 32 mm Dia

b) 25 mm Dia

A19) Supplying and fixing of 20mm dia UPVC pipe line (Fully Concealed in walls)

A20) Supply and Fixing of HDPE Tank 1000 liter Capacity

LGN CONSTRUCTION