SPECIAL REPAIR/ REPLACEMENT OF HT/ LT OH LINE TO XLPE UG CABLES AND OTHER CONNECTED ITEMS AT NASIRABAD

Amount

Dismantling of old unserviceable ACSR conductors from existing PCC/ RCC/ Steel poles.

Dismantling of old unserviceable insulators any type & any size from pole (PCC/ RCC/ Steel )

Dismantling of Cross arms of MS channel or angle section etc complete.

Dismantling stay assembely complete with stay wire.

Dismantling GI earth wire/ old unsv garding

Dismantling street light fitting of any size and type

Dismantling cable protection pipe 25/ 40/ 50/ 80 mm dia.

Taking out old unserviceable service mains

Taking out old unserviceable/ broken street light bracket

Taking out old unserviceable UG cable of any size and core

Supply, Laying, testing of cable XLPE/ PVC Insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 Sq mm 2 core Note:- Excavation and earth shall be measured separately

Ditto all as per item No 11.00 here-in-before but size 10 Sq mm 2 core

Supply,Laying, testing of cable XLPE/ PVC Insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of following seizes Note:- Excavation and earth shall be measured separately.

Ditto all as per item No 13.00 here-in-before but size 16 Sq mm 4 core

Supply, Laying, testing of cable XLPE/ PVC Insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sq mm 4 core.

Ditto all as per item No 15.00 here-in-before but size 35 Sq mm 3.5 core

Ditto all as per item No 15.00 here-in-before but size 50 Sq mm 3.5 core

Ditto all as per item No 15 here-in-before but size 70 Sq mm 3.5 core

Ditto all as per item No 15 here-in-before but size 95 Sq mm 3.5 core

Ditto all as per item No 15 here-in-before but size 120 Sq mm 3.5 core

Excavation in trenches in any type of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC/ Steel tubular poles/ stays and struts etc getting out including trimming sides and forming bottom surface all as specified and directed at site.

Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site.

Removal of excavated surplus material to a distance n. exc. 50 mtr away in layer n. exc. 25cm from the starting point all as direcet by Engr-in-Charge.

M&L for old size sub class 'B' bricks straight or curved on plan exc. 6 mtr mean radius for cable cover.

M&L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables. Note:- Punned thickness shall be measured & paid seperately.

M&L for carryout boring under the black top road by any means boring machine and providing hole of 80 mm dia (min) for suitable to fix the GI pipe 80 mm under the road.

Supply and fix light grade 25mm GI pipe fix complete to Wall , Poles etc with suitable clamp for protection of cable complete all as directed

Ditto all as per item No 27.00 above but size 40mm.

Ditto all as per item No 27.00 above but size 50mm.

Ditto all as per item No 27.00 above but size 80mm.

M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip 32 X 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to continuous earth wire or main switch board/ panel etc all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia,light grade GI pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI wire and protection pipe upto 7.5 mtr complete all as specified and directed.

Supply, install, testing and commissioning of electric panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type double door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer including carry out internal connection with suitable Aluminium bus bar (above and incl 63 Amp MCCB)/ 16 Sqmm (below 63 Amp MCCB) single core copper cable, including cable alloy for incoming and outgoing cable complete all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following accessories:

Aluminium bus bar cap 600 Amp-04 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 36 KA, 400 Amp - (incomming) 01 No

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 36 KA 200 Amp (out going)- 02 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 25 KA 100 Amp (out going)- 01 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 25 KA,63 Amp (out going) - 01 Nos

RYB neon indicating lamp set of three- 01

Supply, install, testing and commissioning of electric panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type double door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer including carry out internal connection with suitable Aluminium bar (above and incl 63 Amp MCCB)/ 16 Sqmm (below 63 Amp MCCB) single core copper cable, including cable alloy for incoming and outgoing cable complete all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following accessories:

Aluminium bus bar cap 400 Amp-04 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 36 KA,200 Amp (incomming) - 01 No

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 25 KA,125 Amp - (out going)-01 No

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 25 KA,63 Amp (out going) - 01 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 25 KA 40 Amp -(out going)-02 Nos

RYB neon indicating lamp set of three- 01

Supply, install, testing and commissioning of electric panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type double door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer including carry out internal connection with suitable Aluminium bus bar (above and incl 63 Amp MCCB)/ 16 Sqmm (below 63 Amp MCCB) single core copper cable, including cable alloy for incoming and outgoing cable complete all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following accessories:

Aluminium bus bar cap 400 Amp-04 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 36 KA, 200 Amp - (incomming) 01 No

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 36 KA 160 Amp (out going)- 01 No

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 25 KA,63 Amp (out going) - 01 Nos

RYB neon indicating lamp set of three- 01

Supply, install, testing and commissioning of electric panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type double door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer including carry out internal connection with suitable Aluminium bus bar (above and incl 63 Amp MCCB)/ 16 Sqmm (below 63 Amp MCCB) single core copper cable, including cable alley for incoming and outgoing cable complete all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following accessories:

Aluminium bus bar cap 400 Amp-04

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 36 KA 200 Amp (incomming) -01 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 25 KA,100 Amp (out going) - 01 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 25 KA,63 Amp (out going) - 01 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 25 KA 40 Amp -02 Nos

RYB neon indicating lamp set of three- 01

Supply, install, testing and commissioning of Bus bar chamber of size 60 cm x 60cm x 40 cm outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type double door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer complete all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following accessories:

Aluminium bus bar cap 200 Amp-04 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 25 KA,100 Amp - 01 No

RYB neon indicating lamp set of three- 01

Supply, install, testing and commissioning of Bus bar chamber of size 60 cm x 60cm x 40 cm outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type double door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer complete all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following accessories:

Aluminium bus bar cap 300 Amp-04 Nos

MCCB four pole with thermal magnetic release adjustable type with breaking capacity 36 KA,160 Amp - 01 No

RYB neon indicating lamp set of three- 01

Notes: (For item No 33 to 38) - (i) Rates are deemed to be inclusive of PCC platform of suitable size and 45cm height and 4 Nos legs of 50mmx50mmx6mm and 60 cm in height for fixing the panel (ii) Make of MCCB :-Legrand,Schneider,siamens,L&T (iii) Make:- Universal/Standard/Havells (iv) Danger notice plate (02 Nos) in Hindi and English of size 20cmx 15cm shall be fixed on the panel (v) Contractor provided power coated finish paint on panel.

S&F GI bracket made out of GI Pipe light grade of size 40mm 1.2 m long cut to length bend to the required shape and 02 Nos mounting flat iron clamps size 40mmx6mm, 04 Nos hexagonal bolts 10mm dia 100mm long with nuts and washers

Supply and fixing energy efficient LED street light fitting of 70/72 watt LED pressured die cast aluminium housing with toughned glass, cover IP 66 rating, secondary lens with light efficiency 110 LM/N, 6000K with external 10KV SPD and proted driver all as specified and directed. Make:- Crompton/Jaquar/Philips/Wipro/Surya.

Supply, fixing and testing Street light automatic Nature switch of capacity 5 KW single phase complete with using infrared sensor based NATURE SWITCH for automatic switching of street lights. Nature Switch operation should be based on Nautral Light Lux* level. Required illuminance level for switching ON is ≤ 30 Lux and for swiching OFF ≥ 10 Lux. The sensor should also have part night operation facility of min.4 hrs to max 12 hrs. The sensor along with suitable power contactor(s) and incoming-outgoing MCBs should be enclosed in a pole/ wall/ panel mountable Rust proof, Electric Shock Proof, Termite proof and FR grade thermoplastic polycarbonate Enclosure (with Hinged LID) conforming to IP66 protection class 2. The circuit should also have provision for Manual Operation (i.e Sensor By-Pass option). Make:- Kakatiya Energy system Model SWADEEP-66-5KW 1P or equivalent as approved by the GE.

S&F Junction box made out of polycarbonate, one piece moulding HDPE street light control box with locking arrangment made out of HDPE including 01 No MCB SP 6 Amp 240 Volts complete with 02 Nos aluminium busbar of rating 63 amps for phase and netural on porcelain based insulators and fixing clamps to pole with FI clamp 25 x 3mm for street lights, all as required and directed at site. Make: Sintex/ Hensel/ SHI/ BRITE

S&F Junction box made out of polycarbonate, one piece moulding HDPE street light control box with locking arrangment made out of HDPE including 01 No MCB SP 6 Amp 240 Volts complete with 04 Nos aluminium busbar of rating 200 amps for phases and netural on porcelain based insulators and fixing clamps to pole with FI clamp 25 x 3mm for street lights, all as required and directed at site. Make: Sintex/ Hensel/ SHI/ BRITE

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

Pioneer Enterprises

Aditya Enterprises

kirtiman traders

Nvimal Engineer and Contractor

M/S JAGDISH PRASAD AIRUN

M/s SUNIL ENTERPRISES

MAHARISHI GAUTAM CONSTRUCTIONS

SHREE BHAGWATI ENTERPRISES