Shifting of overhead 33 KV 11 KV LT Line and Transformer at different Places under deposit work of Irrigation and Jal Nigam Department in Prayagraj

Amount

Shifting of overhead 33 KV, 11 KV, LT Line and Transformer at differrent Places, including loading and unloading of material under deposite work of Irrigation and Jal Nigam Department in Prayagraj.

Cartage of 11 Mtr long STP from Store to dump store/work Site Including loading and unloading

Cartage of 33 KV 3x 300 sq mm from Store to dump store/work Site Including loading and unloading.

Cartage of 11 KV 3x185 sq mm XPLE cable from Store to dump store/work Site Including loading and unloading.

Cartage of 11 KV 3x70 sq mm XPLE cable from Store to dump store/work Site Including loading and unloading.

Erection, grouting, plinthing, painting & earthing of substation type double pole structure for 25 KVA /100 KVA T/F at 11m long STP with mounting of all accessories like 11 kv fuse set, TPMO, top channel, Dropper Channel , Sub Station Base, Bracing angle Channels, nuts & Bolt, 11 KV Disc Insulator and disc fitting, 11 KV Pin Insulator with GI Pin with clamps etc. grouting of pole in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr. with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastering around the plinth in ration 1:2:4 with 12 mm thickness curing of plinth done properly (All required material for double pole structure & all grouting material except S.T. Pole provided by contractor ) as per RESSPO norms.

Erection, grouting, plinthing, painting & earthing of double pole structure for 33 KV/11 KV section at 11m long STP with mounting of all accessories like 33 KV Disc Insulator,33 KV Pin Insulator,33 KV Disc Insulator and fitting,11 KV Pin Insulator top channel, Dropper Channel , Sub Station Base, Bracing angle Channels, nuts & Bolt, with GI Pin with clamps etc and other required material. grouting of pole in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr. with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastering around the plinth in ration 1:2:4 with 12 mm thickness curing of plinth done properly (All required material for double pole structure & all grouting material except S.T. Pole provided by contractor ) as per RESSPO norms.

Mounting of 100 KVA and 25 KVA T/F on D/P along with HT/LT connection with support of D.D. wire 70 sq mm, 400sq mm long baarrel All Lugs, Cupper Z Clamp Sutaible for 100 KVA T/F and 25 KVA, nut and bolts atc.(All materials will be provided by the contractor to Complete the work in all respect execpt T/F.)

Earthing of transformer body and neutral separately by lowering of GI pipe of size 1.50” dia 40’ deep, connecting with GI Strip of size 50x6 mm with clamp. (All materials will be arranged by the contractor)

Installation of L.T. cubical Box (CRC SHEET)( 200 amp, 3 phase 4 wire, Aluminium busbar with indicator, and fusing arrangement system) on double pole ,with the help of channel ,clamp & nut bolt etc. (All materials ie LT Cubical box Clamps, Channels etc will be arranged by the contractor) as per sample provided by department.

Laying of 33 KV 3x300 sq mm XLPE cable by machine drilling/mannual/buggi method. The cable shall be laid at the depth of 1050 mm from the surface of road including cartage. The cable shall be laid strictly in compliance to RESSPO Norms.

Laying of 11 KV 3x185 sq mm XLPE cable by mannual/hdd/buggi method/hanging with stay wire supports The cable shall be laid at the depth of 1050 mm from the surface of road with the help of sand, brick & patiya including cartage. The cable shall be laid strictly in compliance to RESSPO Norms . (All required material except 11 KV XPLE Cable provided by Contractor)

Laying of 11 KV 3x70 sq mm XLPE cable by manual/hdd/buggi method. The cable shall be laid at the depth of 1050 mm from the surface of road with the help of sand, brick & patiya including cartage. The cable shall be laid strictly in compliance to RESSPO Norms . (All required material except 11 KV XPLE Cable provided by Contractor)

Fixing of following 33 KV Heat Shrinkable Type Cable Termination kits conforming to VDE-0278/1EEE-48-1975/IS – 13573-1992 and ESI STD. 09-13 all other relevant Standards complete with all accessories for 33 KV, 3x300 sq mm XLPE cable. (Jointing kit will be arranged by the contractor).

Outdoor jointing kit.

Straight Through jointing kit.

Fixing of following 11 KV Heat Shrinkable Type Cable Termination kits conforming to VDE-0278/1EEE-48-1975/IS – 13573-1992 and ESI STD. 09-13 all other relevant Standards complete with all accessories for 11 KV, 3x185 sq mm XLPE cable. (Jointing kit will be arranged by the contractor).

Outdoor jointing kit.

Straight Through jointing kit.

Fixing of following 11 KV Heat Shrinkable Type Cable Termination kits conforming to VDE-0278/1EEE-48-1975/IS – 13573-1992 and ESI STD. 09-13 all other relevant Standards complete with all accessories for 11 KV, 3x70 sq mm XLPE cable. (Jointing kit will be arranged by the contractor).

Outdoor jointing kit.

Straight Through jointing kit.

Hoisting of 33 KV 3x300 sq mm XLPE cable providing GI pipe of size 6” dia 3 M long on double pole including its jumpering, complete with clamps, nut & bolts. As per RESSPO and Electrical safety rules. (All materials will be provided by contractor except 33 KV,3X300 sq mm cable)

Hoisting of 11 KV 3x185 sq mm and 11 KV 3x70 sq mm XLPE cable providing GI pipe of size 6” dia 3 M long on double pole including its jumpering, complete with clamps, nut & bolts. (All materials will be provided by contractor except 11 KV,3X185 sq mm cable)

Fixing & grouting of stay rod with cement, sand and bricks ballast in ratio 1:4:8 and fastening the stay wire with pole and stay rod nozzling (All require materials {Stay rod 16X1800mm, Stay wire 5 KG„ Stay clamp, Loop Insulator Boult & nut )will be arranged by the contractor}

Dismantling of 33kv, 11 kv & LT overhead line and carriage of material from work site/dump store to Naini store.

Dismantling and safe shifting of old 11/.4 KV 100/25 KVA transformer along with LT cubical box, cable GO set & DO set, old T/F plinth, Fencing, T/F etc. safe loading carriage and unloading of dismantled item from site of work to center store and safe loading of T/F from old place to new place including related shifting work of HT and LT Line with require materials

A.D.Engineering Works (BID ID -4770544)

ABHISHEK TRADERS (BID ID -4771103)

D N S ENTERPRISES (BID ID -4771034)