Retrofitting of Public Toilet First Floor at Old Bus stand in Attur municipality

Amount

Fly ash in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using fly ash bricks of size 230 x 110 x 70mm including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) sd-18

Supply and fixing of 20W 4 Feet LED Fitting including all labour charges and etc completed

Supply and fixing of 60 watts LED street light outdoor fitting including all labour charges etc completed

Supply and delivery and fixing of 1000 liters Capacity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supply and delivery of 50lpmx175mH THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD including cost and conveyance of Materals at site etc., Completed.

Supply and Fixing of 5.00 HP Suitable for Submersible motor Three phase panel board Star Delta with two level guard and auto start with ISI mark including cost and conveyance of Materals at site etc., Completed.

Supply and Fixing of 4 sq.mm PVC Insulated and sheated 3 core flat copper cable confirming to IS 694/1990 including cost and conveyance of Materals at site etc., Completed.

Supply and delivery of following GI Pipes (Medium) B Class with Specials with ISI mark including cost and conveyance of all materials etc., complete complying with standard specification.50mm dia UPVC Pipe

40mm GI Pipe

40mm GI Coupling

40mm GI Elbow plain

40mm GI H Nipple

40mm GI Tee

40mm GI Union

40mm GM Gatevalve

40mm GM NRV

40mm x 20mm GI Reducer Tee

20mm GI Pipe

20mm GI Elbow

20mm GI Coupling

20mm PVC Ballvalve

Borewell Dummy Plate-100mm

Borewell MS Clampset-100mm

Towards the labour charges for cutting and threading for GI Pipes etc., Completed Cutting 40mm dia GI Pipe

20mm dia GI Pipe

Threading 40mm dia GI Pipe

20mm dia GI Pipe

Laying and Jointing the GI Pipes and Specials including all Labour Charges etc completed For GI Pipe

Labour charges removel of power pumps in borewell labour charges for erection of twin packer duplex type jet pumps in bore wells upto 150 mm dia including fixing of Suction pipe regulating valves with jet assembly upto a maximum depth of 30 m and delivery pipe valves pressure gauges upto the exterior wall of pump room and erection of pan el board consisting of TPICN switches starter, Voltmeter, Ammeter, three indicator lamps capacitor and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumps and trail run for 10 days including signing of completion of reports as required by EB authorities and finishing the pipe holes including the foundation bolts, nuts and earth pits.

Labour charges Erection of power pumps in borewell labour charges for erection of twin packer duplex type jet pumps in bore wells upto 150 mm dia including fixing of Suction pipe regulating valves with jet assembly upto a maximum depth of 30 m and delivery pipe valves pressure gauges upto the exterior wall of pump room and erection of pan el board consisting of TPICN switches starter, Voltmeter, Ammeter, three indicator lamps capacitor and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumps and trail run for 10 days including signing of completion of reports as required by EB authorities and finishing the pipe holes including the foundation bolts, nuts and earth pits.

Rate for flushing of borewell of 6” dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by ‘V’ notch method if required.

supply and fixing of Incinerator machine including all transportaion charges and all labour charges etc completed( Thickness of thermal Insulation material (mm)25 millimeter Thickness of MS/SS sheet of burning chamber (internal) (mm) (Min) 3 millimeterMachine Weight(kg)51-250Thickness of door including insulation (mm)25 millimeterFlexible emission Outlet pipe dia (mm) 40 millimeterMaterial of Housing cabinet (External) Mild Steel(CRCA) sheetMaterial of Burning chamber (Internal) Mild Steel(CRCA) sheet Material of Thermal Insulation High Density Ceramic Board Temperature indicator provided Minimum Burning temperature (degree C)800Burning Capacity at a time (Number of Napkins) 26-50Burning time of full capacity Napkins/pads (minutes) (Max) 20 minute Automatic digital controller for time Automatic digital controller for temperatureType of SCU (Smoke Control Unit) Separate unit Material of housing of Smoke Control Unit (SCU) Mild Steel(CRCA) cabinet Both carbon Control and Foul odour Control Chambers for filteration of smoke emission Number of filters in Carbon control chamberType of filters in Carbon control chamber Activated Carbon filter Number of filters in Odour control chamber Blower RPM1800Warranty in Years (Option of comprehensive warranty is available through bidding only, which if opted will supersede normal warranty in the catalogue)

K.VENKATESAN (BID ID -1234768)