CERTAIN BR REPAIR WORKS PLINTH PROTECTION PLASTERING JOINERY FLOORING TILING AND SANITARY FITTING ETC IN ZONE B OF CENTRAL AREA UNDER GE NASIRABAD

Amount

Demolition of stone/brick masonry built in cement or cement lime mortar complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed, well bonded, bedded & solidly hearted, built in CM (1:6) complete all as specified and directed.

All as per sl item no 2.00 here in before but except stone. NOTE: Old serviceable stones/brick retrieved vide Sl Item no 1.00 shall be reused.

M & L for brickwork with fly ash bricks, old size, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M & L for brick work with fly ash bricks, straight or curved on plan to any radius, in half brick thick wall built in CM 1:4 complete all as specified and directed.

Extra over stone walling of random rubble, uncoursed for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 20mm complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in surface channel and drain etc. complete all as specified and directed.

Taking down cement or cement lime plaster from stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) on stone masonry wall on external surfaces finished fair and even complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:6) on stone masonry wall surfaces finished fair and even complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:4) on ceiling surfaces finished fair and even complete all as specified and directed.

M&L for prepartion of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for prepartion of new plastered or unplastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over & including one coat of 1mm thick putty (JK / Birla) complete all as specified & directed.

M&L for preparation of new decorative plastered surface of wall and applying two coat of cement base paint complete all as specified and directed

Dismantling floor, hearth or wall tiles including cement mortar and rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M & L for vitrified ceramic tiles light shade 10mm thick (square / rectangular) polished area of each tiles n.exc 0.36sqm in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile laid over and including screed bed 15mm thick in CM (1:6), 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate complete all as specified and directed.

M & L for vitrified ceramic tiles light shade 10mm thick (square / rectangular) polished area of each tiles n.exc 0.36sqm in skirting set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile over and including 15mm thick screed plaster in CM (1:4) complete all as specified and directed.

M & L for non-skid ceramic coloured tiles (joint free), 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6), 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregateas in floor complete all as specified and directed.

All as per Sl item no 20.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set & jointed in neat slurry and pointed in white cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.

M & L for glazed ceramic coloured tiles, 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces of wall such as dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile over and including 10mm thick screed plaster in CM (1:4) complete all as specified and directed.

M&L for machine cut Kota stone slab flooring of size 550mm x 550mm 18-22mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over & including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for Kota stone slab 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick in CM (1:4) complete all as specified & directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed. (1:6) complete all as specified and directed.

M & L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick with grey cement and no pigments as in floor set, jointed and pointed in neat cement slurry laid over and including 20mm thick cement screed base in CM 1:6 complete all as specified and directed.

M & L for machine pressed precast concrete interlocking tiles, reflective type, in path 60 mm thick, ISI marked, M-35 grade of approved quality laid over & including 50 mm sand cusion vibrated with mechinical vibrator complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm crushed stone aggregate) as slightly rounded or chamfered angles on edges complete all as specified and directed.

M & L for 50mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring complete all as specified and directed.

M&L for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished fair and even laid in alternate bays n.exc 2m in length all as specified and directed.

M&L in repair for providing precast cement concrete louvers and jallies, 35mm thick (measured solid) 1:2:4 type B-0 (using 12.5mm thick graded stone aggrigate) set in CM 1:4 including all mouldings complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each leaf and removing from site complete all as specified and directed

M & L for rolled mild steel work angle iron (40x40x6mm) as in door frame (Chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-210 Gde E-165 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour sheet PVC Sheet reinforced with M.S square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 156 of SSR Part - II 2010 complete all as specified and directed. Note: Cadmium screws to be used for fixing and fixtures.

S & F second class HW Hollock/Bansum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned & chemically pressure treated complete all as per specified and directed.

S & F second class HW Hollock/Bansum/Sal, 35 mm thick, glazed and skeleton shutters, factory made open rebated (Three panels)and prepare to receive glass, gauge etc with out sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 1991 Part-I, section 8 clause Member shall be kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm complete all as specified and directed.

S & F aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S & F aluminium alloy, anodised sliding door bolt, 300mm long, ISI marked, with hasp and staple (bolt type) and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S & F 125mm single action spring hinges, mild steel with steel wire spring, stove enamelled black, fixed to angle iron door frame by welding complete all as specified and directed.

S & F in repair steel window/ventilator factory made, made out of MS hollow section 79mmx39mmx1.6mm thick frame with double shutters (Glazed & wire gauge shutters) made out of 'Z' section using flush butt welding & tenon riveting all as per IS 1038 / 83, dobby hinges shall be provided to both shutters. Locking arrangements as per sample approved by GE, provided with knob, 10mm MS square bars in grills, 'Z' section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making good in PCC 1:2:4 type B-1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. NOTE :- Wire mesh and sheet glass shall be measured & paid separately under relevant items.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed

Taking out old unserviceable steel wire cloth & S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or stainless steel wire staple complete all as specified and directed

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

M&L for preparing the new wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer complete all as specified & directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer complete all as specified and directed.

S&F in repair fancy type aluminium curtain rods 22 mm dia powder coated complete all as specified and directed.

S & F MS powder colour coated, decorative type knobs with bracket fixed at end of pelmet rod suitable for 22mm dia complete all as specified and directed.

Taking up or down steel tubing and connection 15mm bore keeping aside for reuse or removing to store complete all as specified and directed.

All as per item No. 54.00 here-in-before but 20mm dia

All as per item No. 54.00 here-in-before but 25mm dia

Supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.

All as per item No. 57.00 here-in-before but 20mm dia

All as per item No. 57.00 here-in-before but 25mm dia

S & F in repair stop valve, 15mm bore, cast copper alloy fancy type, chromium plated with long shank & cup (Concealed type), screwed down, high pressure, screwed both ends for iron pipes complete all as specified and directed.

S & F in repair bib taps ISI marked, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore of pipe complete all as specified and directed.

S&F in repair pillar tap,15mm bore, cast copper alloy, chromium plated, fancy type, screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F in repairs 15 mm bore bib taps standard of PTMT any colour, screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and directed.

S & F in repair brass chromium plated shower rose of 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S & F in repair tubular towel rail,aluminium anodised 20mm dia ‘D’ type 60cm long between flanges complete all as specified and directed.

Taking down old unserviceable WHB and S&F vitreous China, coloured, wash hand basin flat back of size 550 x 400mm including waste coupling, waste pipe etc complete all as specified and directed

Taking down old unserviceable PVC connection and S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed

Taking down old unserviceable water closet seat cover & S&F plastic water closet seat cover, white, closed pattern with flat bottom and cover & mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Taking out old unserviceable water closet and S & F Vitreous China wash down closet pan (pedestal pattern), white, including plastic cover white closed pattern whith flat bottom and mild steel chromium plated / PVC hinge device including connections to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe etc complete all as specified and directed.

Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with chinaware ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed.

S&F vitreous bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including waste pipe, fixing plugs, (excluding flushing cistern and flush pipe), complete all as specified and directed.

S & F in repair PVC valve less, syphonic action type flushing cistern, ISI marked, 10 litre capacity, low level, white/ivory colour, with inlet, ball valve, float, handle fixed with PVC rawl plug of suitable size complete all as specified and directed.

Taking down eaves gutters and rain water pipe including all fittings complete all as specified and directed

S & F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls ISI mark, complete all as specified and directed.

S & F 110mm bore PVC (SWR) bend / shoe of any radius complete all as specified and directed.

Taking down CI soil, waste and vent pipe 100mm bore size set in CM from walls/trenches complete all as specified and directed.

Taking down CI soil, waste and vent pipe 75mm bore size set in CM from walls/trenches complete all as specified and directed.

S & F 100mm dia (bore), cast iron (sand cast) soil, waste & vent, ISI Marked in any length with or without ears, with cement joints, fixed to wall with existing clamps complete all as specified and directed

S & F 75mm dia (bore), cast iron (sand cast) soil, waste & vent, ISI Marked in any length with or without ears, with cement joints, fixed to wall with existing clamps complete all as specified and directed

S & F 75mm bore CI bend of any radius complete all as specified and directed.

S & F in repair cast iron nahani/floor trap 75mm outlet with grating including jointing to waste pipe fixed in PCC (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified & directed.

Supply only stack clamps out of 50mm x 3mm flat iron & 16mm dia round iron stays, including bolts & nuts and securing ends of stay to walls or roof bore of pipe 110mm complete all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and S & F false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness(as per IS: 14862) of size 595x595 mm and any one of the desin (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length, and 15x32mm made from 0.30 mm thick sheet, and cross "T" of size 15x32mm made of 0.30 mm sheet, spaced between main "T" at 600mm c/c to form a grid of 600X600mm and wall angle of size 15x20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixures,smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin,etc with dash fasteners,GI adjustable rods of 3mm dia with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all height complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) on brick masonry wall surfaces finished fair and even complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:6) on brick masonry wall surfaces finished fair and even complete all as specified and directed.

GOMA CONSTRUCTIONS COMPANY

M/s Jai Jinendra Constructions

M/s SUNIL ENTERPRISES

M/S Nexus Projects

ANAM BUILDCON

kirtiman traders

MITTAL ENTERPRISES