Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 LAccepted-AOC TAMIL NADU TAMIL NADU TAMIL NADU | CHENNAI | TAMIL NADU | 600001 | ₹8.8 L | L1 | Accepted-AOC Awarded |
| 2 | L2₹8.8 LSame as L1Rejected-AOC | ₹8.8 LSame as L1 | L2 | Rejected-AOC not Awarded |
Tender Value
₹8.4 L
EMD Value
₹8,500
Closing Date
5 Feb 2026, 3:00 pmClosed
ZONE OFFICE-3
NO.1, THATTANKULAM ROAD, MADHAVARAM, CHENNAI-60
Formation of New Footpath inside the Teachers Colony 4th Cross Street Park in DN-33, Unit-08,Zone-03 (Under MC Fund 2025-26)
2026_CoC_649930_1
Z.O.III.C.NO.E1/6244/2025
Limited
Civil Works
Works
120 days
CHENNAI
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹8,500
24 Jun 2026
2 Feb 2026
6 Feb 2026
2 Feb 2026
5 Feb 2026
2 Feb 2026
Earth work excavation for foundation in all kinds of soils invarying depths including dismantling any masonry or roots met with in foundation shoriEarth work excavation for foundation in all kinds of soils invarying depths including dismantling any masonry or roots met with in foundation shoring with planks and bailing water if necessary, clearing levelling the site with initial lead and including refilling the sides with excavated earth etc. complete
Carting away the surplus earth and debris to a lead of 1km and dumping in the Corporation land as directed during the execution.
Providing Quarry Rubbish From Approved Quarry Including Cost And Conveyance of All Materials To Work Site All Labour For Spreading. Watering Compacting Etc. Complete.
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Providing And Laying In Position, Standarded Concrete Mix M-20 Grade In Accordance With Is:456-2954 Using 20mm Ond Down Graded Hard Broken Granito Stone Jelly For All Rcc Items of Works With Minimum Cement Content of 325 Kg/M3 And Maximum Water Cement Ratio of 0.55, Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is:9103 to accelerate, Retard Setting of Concrete, Improve Workabilly Without Impairing Strength And Durability With About (5 Cu.In.) 7730 Kg. of 20mm Machine Crushedstone Jelly And With About (3.3 Cum.) 5150 Kg. of 10-12mm Machine Crushed Stone Jelly And With About (4.79 Cu.m.) 7670 Kg. of Crushed Stone Sand (M Sand), But Excluding Cost of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing and including pumping charges Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor/ Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental, Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements of Is Standards. (No Separate Payment Will Bemade By The Department For The Excess Usage of Materials)
Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement for RCC column footings pintol blocks plinth beam staircase steps critical steps critical piers etc. using mild steel sheets of size 90x60cm and 10 gauge stiffened with welded mild steel angles of size25x25x3mm for boarding laid over silver Oak (country wood) joistsof size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cmcentre to centre etc. complete..
Providing And Fixing All Side Machine Cut Granite Stone Using 0.6M Height 0.100M Thick And 1.0M Length Granite Stone Without Fragmentation For Centre Median Including Cost And Conveyance of Granite Kerb From Available Source To Work Site Including Labour Charges For Fixing The Granite And Pointing With cm. 1:3 And All Other Incidental Charges Etc. Complete.
Labour Charges For Fixing Machine Cut Granite Stone Kerbs of 0.45M Height And 0.125M Thick Granite Stone Kerb Including Labour Charges For Fixing The Granite And Pointing With cm 1:3. Cost Inclusive of All Labour Charges Cement Mortar Etc. Complete ( Excluding Cost of Granite Kerb)
Brick work using best quality II class table moulded chamber burnt bricks of size 9" X 4-3/8" X 2-3/4" in cement mortor 1:6 for foundation and basement including curing etc complete complying with standard specification
Plastering with cement mortar 1:3 (1cement and 3 Crushed Stone Sand (Commercially called P-Sand)) 10mmthick including hacking, curing,etc., complete for ceiling andother exposed RCC surfaces.
White washing two coats over new plastered surface..
Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It must provide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years..
Stainless Steel Handrail 900mm high Providing and fixing stainless steel handrail 900mm high (as shownin drawing) made out of stainless steel conforming to SS 304 with 8pct.to8.5pct. nickel using 50.8mm outer dia at top (with 1.6mm wall thickness) and 38.10mm(1.6mm wall thickness ) stainless steel pipe placed vertically at 1m centre to centre and two horizontal SS pipe 25.40mm outer dia (with 1.2mm wall thickness) welded at a distance of 300mm using TIG welding process with 308L SS electrode (in station building all flooor staircases) with necessary bends, flanges and base plates. Rate is inclusive of all materials, labours, lead, lift,etc. as directed by Engineer in-charge.
Supplying and fixing M.S.Grill gate of required size in twoshutters with necessary iron members gun metal cups and wheels75mm dia. with fittings locking arrangements etc. complete including painting a priming coat of approvedprimer etc. complete (The design of gate furnished is subject toalteration during execution.).
Providing SS Arch for Enterance gate etc.,
Providing Naming Stone etc., Complete
Providing Electrical & PlumbingArrangements etc., complete.
Providing a Good Selfie Ornamental Statue etc., complete (As approved by the Executive Engineer)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_779267.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.20 MB
6244.pdf
Tender Documents • 0.48 MB
BOQ_779267.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .