Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹32.5 L+₹4,775 (0.15%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹34.1 L+₹1.6 L (5.04%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹36.6 L+₹4.2 L (12.9%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹39.2 L+₹6.8 L (20.9%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹50 L
EMD Value
₹50,000
Closing Date
18 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow 11, Sardar Patel Marg, Lucknow Cantt - 226002
WELCOME MAINT / PERIODICAL SERVICES AND OTHER B/R COMPREHENSIVE SERVICES TO THE MD AND OTM ACCN IN THE AREA OF AGE B/R-I UNDER GE (WEST) LUCKNOW
2022_MES_525565_1
GE/W/LKO/ 22 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
Lucknow
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹50,000
Yes
27 Jul 2022
21 May 2022
20 Jun 2022
21 May 2022
18 Jun 2022
4 Jun 2022
21 May 2022 - 28 May 2022
60 days
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.
M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed..
M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L 15 mm thick rendering in CM (1:6 ) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L 15mm thick rendering in CM 1:4 on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified & directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint with roller complete all as specified.
M&L preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed.
M & L for preparation of old treated surface of wall and applying a coat of white wash complete all as specified and directed.
M & L for preparation old treated surface of wall and applying one coat of cement based paint with roller complete all as specified and directed.
M & L for preparation of old treated surface of wall and applying a coat of oil bound distemper with roller complete all as specified and directed.
M & L for preparation of old treated surface of wall and applying two coats of oil bound distemper with roller complete all as specified and directed.
M & L for complete removal of existing treatment of old surface of wall and applying two coats of plastic emulsion paint with roller over a coat of primer complete all as specified and directed.
M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying a coat of synthetic enamel paint complete as directed.
M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete as directed.
M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying a coat of synthetic enamel paint complete as directed.
M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete as directed.
M & L for preparation of old treated surface of wall/roof projections including facia, cornices etc and applying a coat of weather proof exterior emulsion paint complete all as specified and directed. Note- Emulsion to be carried out through air less spray machine ( Mechanical means)
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine ( Mechanical means)
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified directed by Engr-in-Charge
M&L Vitrified Ceramic coloured tiles light shade 8 to 10 mm thick (square/ rectangular) polished, joint free , area of each tiles not exceeding 0.36 sqm sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L Vitrified Ceramic coloured tiles light shade 8 to 10 mm thick (square/ rectangular) polished, joint free , area of each tiles not exceeding 0.36 sqm sqm, on walls as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 10mm thick screed bed in cement & sand mortar 1:4, complete all as specified and as directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile not exceeding 0.09 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L for glazed ceramic tiles (coloured) 300x200x7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete . all as specified and as directed.
M&L for glazed ceramic tiles (coloured) 450 x 300 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete . all as specified and as directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.& including screed bed or bedding layer 15mm th in cement mortar 1:4 complete all as specified and directed.
M&L Machine cut kota stone slab flooring18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm screed bed bedding layer in CM 1:6 complete all as specified and directed.
M&L Machine cut kota stone slab flooring 18-20mm thick in risers to steps, skirting, dado, pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm rendering in CM 1:4 complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregae as in floors, finished even and smooth using extra cement, complete, all as specified & directed.
Supply only glass dividing strips 38mm wide and 3mm thick and inserted in position all as specified.
S& F in repair 18/19mm thick BWR plywood, interior grade, both side commercial face, fixed with screws to timber frame-work, edge chamfered complete all as specified and directed.
S & F 0.9 mm thick sunmica/laminaton with decorative lamination fixed with synthetic Glue / Adhesive to timber frame/wood work, edge chamfered as directed complete all as specified and directed.
S&F continuous (Piano) hinges mild steel bright finished or electo galvanised, with width of flap 30 mm when open,and fixed with screws complete all as specified and directed.
S&F 100 mm long aluminium anodised, haps and staple, safety type with steel hinges pin including bolts to hinge plate and fixed with srews complete all as specified and directed.
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S&F ball catches with 8 mm dia steel ball and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed .
S&Fin repair stainless steel 25mm dia curtain rods including brackets and fancy type end knobs, complete, all as specified and directed.
S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.
S & F in repair two(double) legged floor door stopper of aluminum body & tougues anodised with hard drawer steel spring fixed in floor of over all length of cover plate 140mm complete all as specified and directed..
S&F in repairs mild steel helical door spring 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips complete all as specified.and directed.
S & F Sheet glass 3mm thick ordinary quality and glazing with rubber bedding etc in suqares n exc 0.5 Sqm in each pane complete all as specified.and directed.
S & F in repairs 'E' board 600x600x4mm thick white prelaminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32 x 300mm and spaced at 1200mm centers securely fixed to the structural soffts by approved hangers at 1200mm, maximum centrers.Hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and jumper and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm centre to from 1200 x 600 mm modules cross tee longer than 600mm to be supported independently. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturer's instructions complete all as specified.and directed.
S&F in repair 4mm thick 'E' Board of size 600x600mm, white, prelaminated sheet embossed reinforced designer ceiling board tiles of approved texture including all necessary drilling, cutting to fix electrical items complete all as specified and directed.
S&F in repairs 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete, all as specified.
S&F in repairs aluminium handle, 150mm size, fabricated type, anodized (ISI marked) complete all as specified.
S & F in repairs 200mm long alumunium anodised barrel tower bolts of extruded section complete all as directed and directed.
M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.
M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.
Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
S&F in repairs long body 15mm bore bib tap, quarter turn, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. Make: Jaquar/Prayag/ESSCO/Parryware
S&F in repair fancy type pillar taps, quarter turn, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia complete all as specified and directed.
S&F CP angle valve long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and directed.
S&F in repair central hole wash hand basin mixer,fancy type,brass chromium plated, with reound spout with poup waste system , including plugging and fixed, suitable of 15 mm bore pipe complete all as specified and directed.
S&F in repair wall mixer with telephonic shower arrangement, connecting legs and wall flanges, fancy type, brass chromium plated, with swinging spout including plugging and securing to walls suitable for 15 mm bore pipe complete all as specified and directed.
S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed.
Supply and Fixing in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply and Fixing in repair Gun-metal, globe or gate valves 15mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F in repair PTMT bib taps standard of any colour, 15mm bore, high pressure (minimum weight 90 grams), screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair PTMT Pillar taps standard of any colour, 15mm bore, high pressure (minimum weight 110 grams), screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair PTMT stop valve standard of any colour, 15mm bore, high pressure (minimum weight 90 grams), screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S & F in repairs 32 mm bore Brass chromium plated bottle trap for wash basins with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.
S & F in repairs Brass spindle for Concealed stop cock any type or pattern complete all as specified and directed.
S & F in repairs Brass spindle for bib tap/stop cock/angle valve etc any type or pattern complete all as specified and directed.
S & F in repairs Brass spindle for bib tap/stop cock/angle valve etc any type or pattern of make Jaquar/parryware complete all as specified and directed.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.
S & F in repair Flush syphon Kit for any respective pattern for low level flushing cistern any description complete all as specified and directed.
Supply and fixing in repairs PVC connections 600mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.
S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed.
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.
S & F in repairs vitreous china wash down water closet (pedestal pattern/EWC) pan with seat cover white with “P” or “S” trap including connection to drain or outgoing and to syphonage pipe complete all as specified and directed
S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.
S & F in repair Jet spray, chromium plated, with 1 mtr PVC pipe of superior quality complete all as specified and directed
S and F PVC flexible waste Pipe, 32 mm bore for WHB /Sink complete all as specified and directed.
S & F hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed.
S & F in repair of plastic water closet seat cover (white), closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed.
Supply and Fixing kitchen sink with drainage board, made out of 1mm thick stainless steel sheet with plug, washer, stainless steel waste coupling, PVC waste pipe including bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.
S & F in repairs PVC coloured bath cabinet overall size 560mmx410mm decorative design with looking mirror including all fittings complete all as specified and directed
Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres and refixing the same after necessary cleaning and repair complete all as specified and directed.
Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc and S&F 500 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
Dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc and S&F 1000 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
S & F in repairs PVC water tank cover with locking arrangement for 500/1000 litre capacity water tank complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc exc 250 & n.exc 500 ltrs capacity and writing date of cleaning using synthetic enamel paint all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc exc 500 & n.exc 1000 ltrs capacity and writing date of cleaning using synthetic enamel paint all as specified and directed.
S&F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F PVC bends 110 mm bore complete all as specified and directed
S&F PVC bends 75 mm bore complete all as specified and directed
S & F in repairs rubber beading of size 50x5mm for aluminium doors complete all as specified and directed.
Supply & fix in repair CP Brass Tubular Towel Rail, 20mm dia D type 60cm long between flanges complete all as specified and directed.
S & F in repairs flush handle for any pattern of PVC low level cistern of any description complete all as specified and directed.
S & F in repairs 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.
S & F in repairs 40 mm bore Brass chromium plated Waste coupling for kitchen sink with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.
S&F 100mm size butt hinges, medium weight, cold rolled, mild steel and fixed with screws complete all as specified and directed.
S&F in repair PTMT grating doom 100mm dia complete all as specified and as directed.
S & F Soap dish CP any size complete all as specified and directed.
M & L for opening of air lock/blockage in GI pipe line from outlet of water tank to all internal GI pipes fittings to smooth flow of water from Bib taps/ shaower/ WHB pillar taps/ stop valves etc complete by air pressure / water gravity pressure etc. complete all as specified and directed.
M/S Reliance Construction
Adamya Group Of Company
M/s J C Oberoi
M/S S&R Construction
M/S SWATI CONSTRUCTION
TIMAR ASSOCIATES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .